Installation Guide For GBA SP The Great Wave Replacement Shell

Installation Guide For GBA SP The Great Wave Replacement Shell - eXtremeRate

Рет қаралды 32,436

2 жыл бұрын

UPDATE:
If you want to install the GBASP IPS LCD kit from Funnyplaying on our GBASP replacement shell, please check this post:
• Post
Project Revivtro #9-2
eXtremeRate raised the project #REVIVTRO in 2020, aimed to revive your retro gaming console with modern tech.
GBA SP is the upgraded version of GameBoy Advance released in 2003. The foldable design and frontlight/backlit, as well as the internal lithium-ion, made it become one of the most successful handheld consoles in the world.
As we research the replacement shells and buttons for the GBA SP on the market, we found the mold of them is not precise enough, so we decided to make our own mold. With more accurate mold and made of premium ABS material, the quality of the eXtremeRate housing for GBA SP is one of the best in the world. Let’s take the GBA SP from your drawer and give a new look to your old friend!
NOTICE: There are 2 models of GBASP, one is AGS001 (front light), the other one is AGS 101 (backlit), our replacement shells and buttons are compatible with both of them.
Shop Links:
Amazon US: amzn.to/3iVIe2U
Amazon CA: amzn.to/3Pi6vfP
Amazon MX: amzn.to/3FgIwJp
Amazon DE: amzn.to/3Ph7jBx
Amazon UK: amzn.to/3FHjUuK
Amazon FR: amzn.to/3BnInme
Amazon IT: amzn.to/3HnLhv6
Amazon ES: amzn.to/3hcNS0e
Amazon AU: amzn.to/3FhAYWX
eXtremeRate.com: extremerate.com/ASPT1001
Aliexpress: bit.ly/3PfCe1a
eBay: ebay.to/3iTn3ig
BGM:
Tiny Love - Roa

Пікірлер: 93

@rextheripper7379 9 ай бұрын

Just bought and switched over my internals from my snapped black one to this. 2 Complaints: 1. The kit doesn't come with new rollers so you NEED your old ones. 2. The new rubbers feel less responsive than the OG ones. (opened it back up and installed my old rubber pads for better feel) Everything Else was amazing. Build quality is superb. Feels amazing in hand. The Blue/purple Chameleon buttons I ordered with it look amazing. Install video was solid. 9/10 product and will be buying another in the future.

@tarvossaturnos834 3 ай бұрын

Only had one issue and that was getting the rotating shafts back in. What worked for me: Open the shell when pushing them back in, works wonders! You don't even have to press hard. Apart from that, thank you for the tutorial, great vid and great shell. I installed the transparant blue shell with white buttons!

@matthewdesantiago7444 3 ай бұрын

Thanks for this!

@MrFabinsky Ай бұрын

Yeah that’s so true, I figured it out while mounting the second shaft lol

@andrei4617 Жыл бұрын

A fantastic shell that fits extremely well!! Was hesitant at first because i have gotten bad after market shells before but this was definitely not what i was expecting

@zacharyfontenot2415 Жыл бұрын

Just finished putting on my first shell ever with this tutorial and it’s awesome! Thank you!

@divodude01 2 жыл бұрын

Thank you very much for this high quality and awesome looking shell. I was searching for a shell like this for a while and when I found it I was so happy and the pictures weren't a scam at all. The shell looks just as good in person. Thanks a lot. You're awesome! :) Edit: And the tutorial was totally fine too of course. xD

@ExtremeRate Жыл бұрын

Thanks for your feedback bro! We are happy you like our products!! :D

@icecreamk1ng Жыл бұрын

Amazing shell! The best repo shell I have ever bought, it feels so good quality in hand

@xxCorraGamesxx Жыл бұрын

I have one MAJOR complaint about the replacement shell, that being that they don't drill out the holes/threads well enough. I've been sitting here almost an hour trying to get screws to tighten fully. Almost my whol case is loose and wobbly from not being able to fully screw in, since the force needed to thread them basically messes up the actual head

@certifiedfridge 11 ай бұрын

Yeah, I had one hole on the back that was lose. I kept loosening my screw until it pretty much made its own threading. A little messed up, yes, but it seems to only happen on rare occasion

@bullsfan1225 Ай бұрын

yup. same issue

@Jiyu567 Жыл бұрын

EDIT: The only problem/ confusion I had with this shell kit was, that I only got one R replacement spring for the R-button. So you get 4 of them in total of which you would only need one for the L- and one for the R-button. I got 4 of them, so I guess two of them were suppossed to be replacements, but here lies the problem I got 3 L springs and only 1 R spring, not that it would really matter, since you would only need one spring for each side to replace the LR-buttons (you could also use the old ones from your former shell), still as this is somewhat supposed to be a review or helpful comment? I just wanted to remark the small "flaw" of this kit. :) So yeah I bought myself the blue-purple shimmering shell for 25 euros. Personally I think it looks great even if I do miss the Nintendo logo on the front. Also the tutorial has been of help! While some parts may be confusing and require careful eyes and your unwavering attention, (look into the comments for these parts) in the end I managed to reskin my gba (i am usually bad at these things and never really tried it before). Even if it took me roughly 3 hours and I even hurt myself a bit lol. So definitely a thumbs up from me! Thank you.

@ExtremeRate Жыл бұрын

Thanks for your feedback bro! And sorry about the springs, we do the packing for the springs and screws with the automatic machine, so it may possibly be caused by it. We will try to avoid it in the future packing! Thanks again and we are happy that you like our products! :D

@Tsubakiee Жыл бұрын

Thanks for the guide, I can't wait until my Chameleon Purple Blue shell comes! This'll be my first shell swap as I tend to keep thing as original as possible, but I loved the color and couldn't pass it up. I'll keep my old shell in the box (which is still in fantastic condition) when I pass along my Nintendo collection to my kids.

@el.tiburon 2 жыл бұрын

i love the work you put into these products and videos they are high quality

@ExtremeRate 2 жыл бұрын

Thank you! :)

@el.tiburon 2 жыл бұрын

@@ExtremeRate did you stop making the xbox 360 controller mods?

@certifiedfridge 11 ай бұрын

Best GBA SP shells money can buy, just swapped my 101 SP with this shell, it looks great and feels amazing. Although nearly perfect, I dont understand why triwing screws are still being used. They are not only inconvenient to troubleshoot when opening the shell, (which you will do multiple times, trust me) but they strip SO easily. I dont know, maybe these screws are just cheap, but they are still inferior to the amount of torque you can put on philips. Not to mention, they strip little to none. I stripped a couple triwings on this shell swap, almost getting the screws stuck in the shell, even with 3+ years of modding experience. I ended up using the phillips included to work on the back side to close it up, maybe this is what they are for? to give you an option of what screw type to use? I am not sure. I used no triwings that were included, and I used every single phillips included, with a combination of whatever short and long screws I had left to close it up. Everything holds up nicely, which is all that matters to me. Please, extremerate, please make phillips a standard… Triwings are useless.

@certifiedfridge 11 ай бұрын

To add, it also would be nice to have seen the screws better like they have done in other tutorial videos, it was very difficult to tell what screw goes where on this video.

@thenameugaveme1540 10 ай бұрын

I didn’t know you had a KZfaq channel 😂 that's cool I bought the atomic purple switch lite shell and was browsing for a gbasp no hinged shell like boxy pixels and stumbled here!

@Micmeat 5 ай бұрын

For putting in the screws on the top screen I recommend putting the shell on a piece of paper or something that will slide easily on a table inserting the screw putting pressure and rotating the shell instead of the screw. Helped me those tri screws are evil.

@bullsfan1225 Ай бұрын

This actually worked wonders. thank you for the suggestion!!! spent an hour on this f'n thing. then this method took 2 min.

@woltergeist9175 Жыл бұрын

A word of caution for the people 'hammering out' the hinges as illustrated at 05:00. From personal experience I can tell that there is a reasonable chance of breaking your old shell into pieces because these hinge pieces simply refuse to come out easily. Not a problem if you were not planning on using your old shell ever again of course....

@melaniealvarez7562 Жыл бұрын

i’m struggling

@PositiveDuality Жыл бұрын

I’m stuck on this part now

@The_hexgames Жыл бұрын

Yeah I’m stuck here…no amount of force is causing mine to come out lol…not sure what to do from here 🤷🏻‍♂️

@cbankla Жыл бұрын

@@The_hexgames use violence

@cbankla Жыл бұрын

Same, The old shell was very brittle and broke in various areas.

@abrahamsantana977 Жыл бұрын

Gracias por video, un material muy bueno y una calidad presumible.

@The_hexgames Жыл бұрын

Any advice for getting the rotating shafts out? I thought the kit would include those pieces but now I’m stuck trying to get my ancient ones out of my old SP

@AndrewBaughman-ds8cb Ай бұрын

Thanks!

@ericurquhart4381 Жыл бұрын

Anyone know where I can get the rotating shafts? Amazon has them for 3$ but 10$ delivery fee.

@popshedpilot6635 11 ай бұрын

Do the original gba screws fit in the new shell, it would be easier to keep track of which screw goes where because the kit doesn't tell you

@yewsuf Жыл бұрын

Love your product! Does the shell fit an original AGS 101 screen or does it require an IPS screen?

@ExtremeRate Жыл бұрын

Thank you! The shell fits the original AGS 101 screen!

@AmberGrimshaw 2 жыл бұрын

Hi, i'm super curious as to what the ribbon cable does from one of your other videos on an xbox one controller because the controller still turns on without it being connected and i cant find any info online about what it does, thanks

@ExtremeRate 2 жыл бұрын

Which video?

@caitlin4309 2 жыл бұрын

Great tutorial, but I'm a little confused on the rotating shaft installations. At time stamps 6:30 and 7:10 there are images showing the wrong way to install. The images look basically the same to what is being film so can you explain it in more detail please?

@ExtremeRate 2 жыл бұрын

Please check carefully on the COVER of the rotating shaft of the "wrong" images, there is a notch on the side of that small cover, which can help you know if you insert the shaft in the correct direction.

@Final_Starman Жыл бұрын

So I did everything but my hinge feels loose now, it clicks when you open it but not when you close it

@The_hexgames Жыл бұрын

Rotating shaft giving me trouble as well…I didn’t realize the kit didn’t include those parts and I can’t seem to get the old ones out of my old device…

@FlabberQuestion 2 жыл бұрын

Would be really sweet if you guys could make a sp unhinged version in ABS. The Aloys from boxypixel are great but just way too expensive. And since you already have the best quality shells out there. 🙏👌

@ExtremeRate Жыл бұрын

Thanks for your suggestion! We will think about that!

@templat3857 Жыл бұрын

great shell, my only problem is that after time it starts to turn brown in the corners. I've tried to wipe it off but no luck. It might have to do with the softtouch coating though I'm not completely sure why. If anyone here has any tips on how to remove the discoloring it would be greatly appreciated

@certifiedfridge 11 ай бұрын

Try IPA, plastic polish…?

@Kyurem97 Жыл бұрын

Hey, does it make a difference if I order this shell from your store (I think you are based in the US?) directly or from AliExpress (which I think is shipping from china)? I am in Europe and the shells are not currently available on Amazon, so I was wondering if there was a difference.

@manfredidonofrio7501 Жыл бұрын

If you buy from AliExpress you get bad quality products which are simply reps of original products and 2 month shipping which is an eternity

@Caswagna93 2 жыл бұрын

Are the SP shells pre-trimmed for IPS screens or do they need to be modified to fit a Funnyplaying V2 screen?

@soup2543 2 жыл бұрын

they are advertised as pre trimmed

@andromedagalaxy3009 Жыл бұрын

Good tutorial, only problem is screen turns on but it’s just blank. Any pointers?

@jvb7397 Жыл бұрын

Same thing happened to me. Try disconnecting the screen ribbon from the board and clean both the contacts on the ribbon and the connector on the board with a toothbrush or q-tip using your strongest IPA. That worked for me!

@MarioMendozaHerrera Жыл бұрын

Hello, is the kit compatible wifi ips v2 screens ?

@pierdp 5 ай бұрын

hi, when I go to assemble the new shell, I have difficulty understanding where to put the right screws back, how do I know which screws go on the shell, which go on the motherboard, which go on the screen?

@kacketnaopacke Ай бұрын

You can help it by organizing the screws at the beginning. Don't just unscrew them and throw them anywhere. If it's needed, write things down, get one of those screw organizer boxes or something. The video shows it very badly because the person doing this has zero regard for how to remember where to put which screw back.

@Witcheridoo Жыл бұрын

There’s no mention of how to fix the sponge for the clear shell?

@Witcheridoo Жыл бұрын

The sponge that came with it is actually way too damn thick and the top cover doesn’t even fit on. I struggled screwing the top cover on so hard my (tiny itty bitty) 3-prong screwdriver slipped and scratched the screen

@starchazer272 14 күн бұрын

Mine is so dirty now, (because of use) how can I clean this type of plastic without damaging it? Thanks!

@elibeetle-owo7 3 ай бұрын

Really would’ve appreciated having all the screws numbered and those corresponding numbers shown on the video as they’re used. I know this isn’t Ikea but when I’m working with this many TINY screws that are barely discernible in length from each other aside from “tiny slightly off white color” and “tiny slightly off bronze color” just. Insanely frustrating. Not to mention that, if I hadn’t been replacing 2 gameboy cases and ordered a set of replacement buttons I wouldn’t have had enough screw drivers because the ones with the orange handle are frustratingly easy to strip.

@vinizzle7000 Жыл бұрын

would this shell work with the Powkiddy V90?

@skstudios2108 2 жыл бұрын

my only complaint is that screws are not in separate bags and labeled, I used the wrong screw and damaged my shell

@nhlvan 2 жыл бұрын

Unless your old screws are rusted and stripped to hell, I'd advise to never use any aftermarket screws.

@ExtremeRate Жыл бұрын

sorry to know that ...

@freshoolongtea 6 ай бұрын

My orange screwdriver is defective it didn’t work at all on any of the screws the black one did though

@jaeeski-427 2 жыл бұрын

How do I get a replacement L & R FPC cable?

@ExtremeRate 2 жыл бұрын

We don't have that, but you can find it on Aliexpress.com

@wit6665 Жыл бұрын

Up the cost of the shells and include replacement hinges because me they do not come out as always as shown in the video.

@williampierce5579 2 ай бұрын

I followed the guide to a T but the one spot I got ahead (literally 3 seconds ahead) was when I went to remove my volume knob. It was unremovable as I quickly learned when it broke off and flew across the room. I hit play on the video and the next frame was it saying it was unremovable. Sigh

@jovanijaimes6340 10 ай бұрын

Can we get a charcoal gray colorway please.

@Milotiiic Жыл бұрын

I bought the Great Wave shell too and it is amazing. Great quality and I absolutely loved it. But I have some issues I wanna talk about: The screws used in this video didnt fit my shell. I dont know if you changed the screws in this last shells or what, but i couldnt fit the same screws in the same places that is shown in this video. I think i didnt use a single "tri-wing screw" in the hole shell. Actually yes, i only used the final 4 tri-wing screws to screw the bottom-back part of the shell. But what i had to do in many cases is use the "Phillips screws" (the ones that have a cross) in places where the tri-wing screw didnt fit (but in the video they fitted!), and I even had to use screws from the older shell so i had no problems. It would be nice if you showed better what screws to use in every place in this guide (maybe a very close up ZOOM at the screw or maybe group them and name them with some type of code or something like that). Another litle thing, with this shell i bought A and B buttons feel kinda flimsy, as if they couldn't be fully pressed (but i would say they feel ok). I compared the original GBA A and B buttons with the extremeRate ones and the original ones feel better. All other buttons feel perfect! Having said that, great tutorial overall and great product!!

@ExtremeRate Жыл бұрын

Thank you for your feedback bro! For the problem of the screw, we will investigate it, and we will also make a better way to show the screw type in future videos. And for the AB buttons, have you tried to use the old rubber pad? Thanks again!

@Milotiiic Жыл бұрын

@@ExtremeRate Yes I tried using the old rubber pad but it feels the same. As I said, the AB buttons feel ok, its just the original ones feels a little bit better but it's not a big problem. I am using the extremeRate AB buttons anyways, thanks!

@noideashere2873 3 ай бұрын

My back plate is missing Two days in the future I got a new package and it was empty. So I bought a new one and it's coming on Wednesday.

@nubialeon5228 Жыл бұрын

Followed these instructions but now my GBA SP doesn’t turn on. When I try to charge it, the orange light comes on and turns off immediately.

@ExtremeRate Жыл бұрын

Please check the ribbon and every other things connect correctly

@nubialeon5228 Жыл бұрын

@@ExtremeRate I did.

@sihocolus 2 жыл бұрын

I recently bought 2 Sets from EXtremeRate. An Xbox Series Controller Front Shell and a White Transparent Thumbsticks-Set for my Series Controller DTF LED Kit as a Replacement bc my Old Whit Ones are yellowed. The Sticks are already here and the Front Shell that should Ariive mid May updated to Mid April. Next time when I have Enough Money again I will Buy the LED kits and Front Shell for my Nintendo Switch. 👍🏻

@ExtremeRate 2 жыл бұрын

Thanks so much bro! :D

@bioswirly3219 7 ай бұрын

Bought a case from this company off of Amazon. I tried to follow this tutorial and without any item description/or any audio instructions as they don't have any I ended up using the wrong screws on it and ruined the brand new case I bought. If you were to make this type of video have a parts list or something to make sure people can follow you step by step

@RaptR97 Жыл бұрын

anyone else struggling hard af to get the screws out? or is it just me?

@jeixs Жыл бұрын

Used another screwdriver that seems to do the job switched between them multiple times

@shatterst0rm380 8 ай бұрын

Should have had the light blue buttons.

@cesaribz6673 2 жыл бұрын

Cuando para la Game Boy original ??

@ExtremeRate 2 жыл бұрын

Por favor, marque este kzfaq.info/get/bejne/pNGYp8io29PTlmw.html

@cesaribz6673 2 жыл бұрын

@@ExtremeRate no hay vídeo

@JonoTaku 2 жыл бұрын

Dont need this but what i DO NEED , Is a charging dock for the rise4 controllers !!! Please , I beg!

@ExtremeRate 2 жыл бұрын

We are working hard on it, please give us more time!

@biozombieactive8792 2 жыл бұрын

Oo GBA SP shells??? :O

@ExtremeRate 2 жыл бұрын

Yes :D

@biozombieactive8792 2 жыл бұрын

@@ExtremeRate yesssss, can't wait till they are on Amazon (I didn't see them 2 days ago)

@wunderwaffefries Ай бұрын

WARNING! - this shell is made of that soft plastic that picks up fingerprints and yellows very easily. I had it for 2 days before it was yellow in the corners no doritos no nonsense. This is disappointing because the kit seemed very high quality it is just a glaring flaw I wanted to make sure others were aware of.