Installation of a Cub Cadet Bagger on XT2 tractor

No video

Installation of a Cub Cadet Bagger on XT2 tractor

Рет қаралды 145,777

BACKYARD WOODSHOP

Күн бұрын

Showing the steps it takes to install a new cub cadet bagger on a 2017 XT2 with 42 inch deck lawn tractor

Пікірлер: 290

@otto6170 5 жыл бұрын

This video was the only one I could find, thank you for taking the time to publish it. Without your help I would have continued to struggle assembling my twin bagger. Kudos!

@thomrider 5 жыл бұрын

Thank you for watching and glad to help

@seiseragaki5777 11 ай бұрын

I expect this mower will last several seasons with decent care. kzfaq.infoUgkx1VWTrayKBdCKAjzAcZ_Eg4dhHTae3LkN also recommend Also, I ran across the problem with it not starting the 2nd time I used it. There is a safety switch which is pushed in by the chute or mulching piece being attached to the deck. I took the cover off and it wouldn't start. Put it back on, no problem. It takes only a minute with 2 easily accessible wingnuts and no tools. This mower starts up first crank each time and it is a joy to use. It also mows in reverse by putting the key to the reverse area after starting and pushing in the triangular button. It will stay in reverse mode until you turn it off. All in all, for my homeowner needs, I really like this mower-and at 70 bucks a cut here in Miami, it's already more than 1/3 paid for itself in a month.

@thomrider 11 ай бұрын

It’s been a great tractor.

@peterbravo357 5 жыл бұрын

I stood there staring at the parts wondering where to start. I watched your video and had it together in 30 minutes. Thank you very much !

@boyfromletterkenny 5 жыл бұрын

That made 2 of us

@jakeviveros9439 5 жыл бұрын

Lol, 3 of us.

@rs4181 4 жыл бұрын

Instruction pictures never really show you what you need to see, this video is a lifesaver. Thank you so much for saving this from turning into a RED/GREEN install scenario. You're the Internets new favorite dad/uncle.

@thomrider 4 жыл бұрын

Glad I could help.

@judenazon8111 5 жыл бұрын

Best video I ever seen on install the cub cadet bagger on a 42" cub cadet tractor kudos!

@thomrider 5 жыл бұрын

Thank you, that’s very kind.

@COOSA6870 5 жыл бұрын

That was the most enjoyable installation videos I've seen. Watching you work through the process. Very well done! If you wasn't a shop class teacher for kids you missed your calling...

@thomrider 5 жыл бұрын

Thank you for watching. I guess I missed my calling.

@reckless74 6 жыл бұрын

Great video Tom, thanks for making this look alot easier than it looks. I was almost going to return my bagger before opening the box!

@thomrider 6 жыл бұрын

Glad I could help. And thanks for watching.

@dongale3950 5 жыл бұрын

By far the best catcher install video.

@thomrider 5 жыл бұрын

Thanks I appreciate that.

@lorie6667 5 жыл бұрын

I agree!

@thomrider 5 жыл бұрын

Thank you Lori. 😀

@philadams4181 6 жыл бұрын

Mine is an XT1 and varied slightly. But this video was great and saved me from having to try to figure out the little pictures on the whole thing. Thanks for taking the time to post it. Much appreciated.

@thomrider 6 жыл бұрын

Thanks for watching, glad I could help.

@aukooze91NCAA13 6 жыл бұрын

Thanks for the video and showing us how to do this. i just bought one and have to assemble the bagger tonight when i get home. Thanks again and great video!

@thomrider 6 жыл бұрын

Thanks for watching and enjoy putting your bagger together.

@boogie7777 6 жыл бұрын

Thanks, for the valuable information. What's visual is a whole lot better than what one can read to obtain a good understanding. Reading the instructions is important, but it cannot compare with seeing it in action. Thanks, a million.

@thomrider 6 жыл бұрын

Horace Copridge glad I could help. Thanks for watching.

@kaylalala4530 2 жыл бұрын

Thanks for taking the time to make this video! We don't have a lawn sweeper so I wanted to use our bagger attachment (still in the box untouched) to help with leaves on the property. I've been arguing with my husband for months, him saying it's gonna be too big of a pain to put it on and off. I told him to drag it out of the barn and I would take care of it. You made it so quick and easy and now I can install it in record time and flash him that sweet marital "I told you so" smile 😉🤣

@thomrider 2 жыл бұрын

Glad I could help. Thank you for watching

@roguegodby9222 5 жыл бұрын

Thank you so much for taking the time to go step by step so an old Jar head Marine like me can understand it. My wife just bought me a 42 inch cut Cub Cadet, and the Bagger. I was a bit leery about assembling it but your video help a bunch.. Shout out to you OOOOORAAAAHHH.

@thomrider 5 жыл бұрын

Thank you for watching and your service.

@erikn6816 5 жыл бұрын

Thank you so much i just bought my Tractor today with bagger and the bagger didnt have instructions in the box, love the video perfect for what i needed and u made it so simple. 👍

@thomrider 5 жыл бұрын

Thank you and enjoy your new tractor

@marthadeiseroth7623 2 жыл бұрын

So helpful-my instruction were not clear-couldn’t understand where the bottom piece of the blower fit-Thank you!

@thomrider 2 жыл бұрын

Glad I could help. Thank you for watching

@ralphjacob1527 6 жыл бұрын

best presentation i"ve seen on how to install the bagging system

@thomrider 6 жыл бұрын

Thank you

@anelson1914 5 жыл бұрын

Thank you for the Vid!! I really appreciate it. I just bought a cob cadet without the attachment then realized why I needed it after covering the wife's and neighbor's car with grass.

@thomrider 5 жыл бұрын

When you need it sure comes in handy.

@andrewh.3996 5 жыл бұрын

Thank you very much for posting this. My bagger did not come with any instructions and this was spot on!

@thomrider 5 жыл бұрын

Glad I could help and thank you for watching

@Tinstar2 5 жыл бұрын

Thank you so much for making this video. Although I have a 2018 model with the clear tube, I was able to get everything together up to the bag hangers using your video. My old eyes had a hard time with the small print of the instructions and it was much easier following your video. Everything changed after the hangers and I had to go by the directions. I got it together with only one hang up. Again, very good instructions on your part. I just wish that it had been the newer model!

@thomrider 5 жыл бұрын

Thank you. I wish I had a clear tube like yours. Enjoy your mower and new bagger, let me know how it works for you.

@Tinstar2 5 жыл бұрын

@@thomrider I love it! My tractor has the electronic fuel injection and starts right up and I no longer have to worry about the problems with gas with ethanol. The bagger actually worked better than I expected. I had read a lot of negativity. I think many of the past problems have been addressed. One thing was that the bagger was falling off. They furnished a new locking nut and washer to replace the wing nut and now there is no way the bagger will fall off. Also, better seals to prevent dirt blowing out from the top and all over the back of the operator. My latches worked just fine so they are better also. I got up all my leaves in my big driveway which is gravel and they only thing was how many times I had to empty the bags...no big deal. I decided to mulch the leaves in my yard, so I just let the bagger overfill and the leaves mulched just fine. I had bought the mulching kit, but no need. It was easy to clear the blockage. I heard a lot of people talk about how hard it was to clear a blockage. I simply dug out the clear tube without disconnecting it and then put the deck in its highest position and then just simply dug out the plug from the discharge going underneath. Never disconnected anything and it worked great. I am very pleased with the whole set up. I recommend the cub cadet tractor and bagger if anyone is thinking about getting them.

@thomrider 5 жыл бұрын

Thanks for the review. I love the fuel injection as well. My only real gripe is with the bagger clogging with slightly wet grass.

@Tinstar2 5 жыл бұрын

@@thomrider I had some slightly wet leaves and didn't have a problem. I did something that someone suggested and I believed that it helped...I sprayed the inside of the bagger tube and around the discharge area with WD-40. Saw this suggestion on a youtube channel and thought...what the heck. It may have helped!

@thomrider 5 жыл бұрын

I will have to try the WD-40 and see how it goes thanks.

@robertglover1168 4 жыл бұрын

This was great. Really easy to follow and made assembly of my Cub Cadet bagger so much easier. Nice work, man!

@thomrider 4 жыл бұрын

Thank you, glad I could help.

@reddragon6613 3 жыл бұрын

Great job on the video, I am ordering one of these next week and its always nice to have a video showing install.

@thomrider 3 жыл бұрын

Thank you for watching

@depositionsandstuff7465 4 жыл бұрын

I ditched my instruction manual and just had this video playing when I installed mine. Thanks a ton for this upload.

@thomrider 4 жыл бұрын

Thank you for watching glad I could help

@xXDianabananaXx 5 жыл бұрын

Thank you for making this video! Ours didn’t come with the instructions. Thanks to your video we didn’t need them!

@plantbasedprepper 5 жыл бұрын

Awesome! Thanks! I just bought my Cadet XT2 42" today but the shop set everything up for me. Can't wait to use it!! I'll be looking for that review video and maybe make one myself!

@thomrider 5 жыл бұрын

I love mine fuel injection is the way to go. Thanks for watching

@JudeThompson224 5 жыл бұрын

Thank you so much inherited my dads mower catcher system had been taken apart for the winter. This video made my baffled brain sane again!

@thomrider 5 жыл бұрын

Glad I could help and thank you for watching

@danielrucinski6968 9 ай бұрын

thank you ordered mine and your video will really help

@michaelgrosvero8984 4 жыл бұрын

Michael here from Melbourne Australia. Excellent job thank you. I have a Rover 42" rideon mower & the Bagger Kit is almost identical. Keep Well.

@thomrider 4 жыл бұрын

Thank you for watching

@yankeegardener9565 Жыл бұрын

Great video. instructions on paper are one thing but for me watching something being put together is better. Thanks for sharing.

@wildbill23c 5 жыл бұрын

The bracket you put together at the beginning of the video that mounts on the back of the lawn tractor is the exact same bracket for the rear weight kit used for the snow blower. I bought that bracket/weight kit as I purchased the 42" snow blower last year, talk about a pain in the butt to setup that snow blower sure was. Luckily most of the stuff stays on the lawn tractor so now it only takes about 15 minutes to install/remove the snow blower. I haven't purchased the bagger yet, but I really need to I guess especially for the fall leaf cleanup HAHA. I only have the Cub Cadet XT1 but the accessories between the 2 lawn tractors are the same so your video will help XT1 owners as well, and these are the same for the current model year 2019 units as well. Great very useful video, definitely will come back when I get my bagger.

@thomrider 5 жыл бұрын

Thanks for the information about the snow blower. Thank you for watching

@terrywiggins1736 6 жыл бұрын

Nice job, very clearly illustrated. Thanks

@thomrider 6 жыл бұрын

Thanks for watching and commenting.

@heatherfranklin2625 4 жыл бұрын

Thank you very much for this video! It's timed perfectly, the instructions are clear, and made it easy to install my twin bagger.

@thomrider 4 жыл бұрын

Glad I could help and thank you for watching.

@phillipletourneau4380 6 жыл бұрын

Thank you alot, lost my instructions and you video showed me how, THANX

@thomrider 6 жыл бұрын

Phillip Letourneau thanks for watching, glad I could help.

@cxspeed 4 жыл бұрын

Thank you much. Your instructions got me 95% of the way there. Mine was a little different. Maybe a newer model. Still thank you for taking the time!

@thomrider 4 жыл бұрын

Glad my video helped.

@kathykempe6541 9 ай бұрын

Great video! I was debating whether I could do this myself! Thank you!

@brendamaxwell381 Жыл бұрын

I just got the box with all these pieces in it. No clue what to do. The information booklet was useless. Thank goodnes I csme across a club cadet video which sort of helped. YOUR video took me form where I was stuck. Tomorrow morning I am back in the garage getting it finished. Going to have a ckeaned up lawn tomorrow afternoon. Thank you

@thomrider Жыл бұрын

Thank you for watching

@carololivie2095 4 жыл бұрын

Thank you very much for this video. I lost the instruction manual and couldn't figure out how to put it together

@thomrider 4 жыл бұрын

Glad I could help.

@karleythompson2213 4 жыл бұрын

Thanks so much for posting! It's easy to follow and exactly the info I needed.

@thomrider 4 жыл бұрын

Thank you for watching

@SuperJaketorres 6 жыл бұрын

Very good video. Thank you for taking the time to make this.

@thomrider 6 жыл бұрын

Thanks for watching and commenting

@st0mper121 5 жыл бұрын

thank you. I just bought one and my instructions was rained on, and got all wet. thx home depot for that i guess. your video helped me figure out what goes where and again thank you

@thomrider 5 жыл бұрын

Glad I could help and thank you for watching

@tedogilvie5942 4 жыл бұрын

Thanks man, this video really helped make the job a lot easier. Way to go!

@thomrider 4 жыл бұрын

Glad to help.

@ralphjacob1527 6 жыл бұрын

Best how to showing how to install a rear bagging system. Very nice

@thomrider 6 жыл бұрын

Thanks for watching and commenting

@jbspeed79 3 ай бұрын

Thanks for video. Installed mine today via this video

@thomrider 3 ай бұрын

Glad my video could help

@alexevangelistaalex1290 4 жыл бұрын

Thx my friend I just did my ! Not even use the instructions just follow your video . Very helpful !

@thomrider 4 жыл бұрын

Thanks for watching, glad I could help.

@donjuwann5868 3 жыл бұрын

Thanks for the video, very good explaning the whole thing,didn't know if I should try to do it myself,video change my mind,thanks again for taking the time to explain everything

@thomrider 3 жыл бұрын

Thank you for watching

@LeoFtravels 6 жыл бұрын

Thanks for posting this, it was very helpful

@thomrider 6 жыл бұрын

Thanks for watching

@jimcrandell7763 4 жыл бұрын

Thank you very much for posting this video. It was a huge help!

@thomrider 4 жыл бұрын

Thank for watching

@mikeford9176 3 жыл бұрын

Thanks just bought the mtd one for my cub cadet 46”. Wish the bags were longer though. Video helped a ton

@thomrider 3 жыл бұрын

Glad I could help. Thank you for watching

@russlindblom3412 3 жыл бұрын

Excellent Video, just hope I can install the bagger now. Thank You

@thomrider 3 жыл бұрын

Thank you for watching. Just take it step by step and it goes pretty easy.

@boyfromletterkenny 5 жыл бұрын

Thank you so much, you made it look so easy.

@thomrider 5 жыл бұрын

Thank you for watching

@davidholt112 6 жыл бұрын

Thanks for the help. Made putting it together easier. Take the rest of the week off. ;-)

@thomrider 6 жыл бұрын

Glad I could help. I wish I could take the rest of the week off. Thanks for watching.

@danafrench6382 4 жыл бұрын

Wow great video your explanation of each is done very very well with out this video I’m not sure I wouldn’t have had to call support.

@thomrider 4 жыл бұрын

Dana French glad my video helped. Thank you for watching.

@gusmason5165 Ай бұрын

Great job and video

@colinguidetti1559 4 жыл бұрын

Thanks for the video the more stuff with a XT2 EFI the better!

@thomrider 4 жыл бұрын

Thank you for watching

@MyRumplestiltskin 5 жыл бұрын

Thank God for KZfaq and BACKYARD WORKSHOP

@thomrider 5 жыл бұрын

Wow! Thank you for watching and the kind words.

@josefalawson3049 3 ай бұрын

THANK YOU, you are a great help. Can't believe I did it!

@thomrider 3 ай бұрын

Glad I could help in some way

@hectorjulian2535 6 жыл бұрын

You definitely helped me. Thanks a lot sir.

@thomrider 6 жыл бұрын

Your welcome. Thank you for watching.

@gordbaker896 Жыл бұрын

Nicely done.

@raymundnarag494 3 жыл бұрын

Great to see this. Just assembled one myself

@thomrider 3 жыл бұрын

Glad you like it. Thank you for watching

@irisheyes6231 2 жыл бұрын

Thank you so much for this video! Extremely helpful!!

@thomrider 2 жыл бұрын

Thank you for watching

@GAGE1959 2 жыл бұрын

Great video !! Very helpful !!

@katherineayers5586 5 жыл бұрын

Mine must be a 2016. I missed seeing the vent on yours which on mine is a section that hooks into the side panel which hooks into the back portion. (Cost to replace just the vent) Also I have a clear/see-thru plastic tubing leading from the cover to the mower decking. I like that part of mine best but I sure like your curved out portion of your top to close over your tubing! Wish mine were that straight forward. Thanks. I appreciate your video just as check against mine! I was 73 yr old female Senior when I got mine and now at 75 wish I had someone to change the blades and to readjust the belt that tends to come off with the least amount of a stump or uneven levels (driveway to grass has a 3" ledge I have to do down off of.) Unlike your video, my instructions were not that easily read because the diagrams were rather cluttered and small on that old brown colored booklet.

@thomrider 5 жыл бұрын

I guess they made changes in the new year. Thank you for watching

@edpagan3103 4 жыл бұрын

Great Video! Couldn’t have done it with out you!

@thomrider 4 жыл бұрын

Glad I could help.

@DaveKenderdine 6 жыл бұрын

Tom, I can't thank you enough!

@thomrider 6 жыл бұрын

I'm glad you found the video useful, thanks for watching

@rickard27292 2 жыл бұрын

Thank you, easy to follow along. I'll probably have my wife help with the knob work, she's helpful like that.

@thomrider 2 жыл бұрын

Thank you for watching

@tobymofield6597 Жыл бұрын

Thank you Tom....This Helped.

@thomrider Жыл бұрын

Glad I was helpful

@andrewavenenti5012 6 жыл бұрын

benjie thanks great video all done

@thomrider 6 жыл бұрын

Thank you

@ellenfinke-mccarthy2420 5 жыл бұрын

Thanks for the video! Very helpful.

@thomrider 5 жыл бұрын

Glad I could help, thanks for watching

@content9836 4 жыл бұрын

Nice video! I smiled when you had the same issue mounting the bagger lid, as I also had to wiggle the thing to finish mounting the lid. I would add, a person will need a couple of rolls of black two inch black tape to hold the chute together after the first year. The flat piece of plastic is rolled into a tube with junjie fasteners, and these break, Also, the thrid year, the sides of the tube started to slit. This helps keep the chute rigid and reduces clogging the chute. Also, there is no real latch for the bagger cover, just a hole in the plastic to anchor on the latch pin. My wife used a rubber strap with the "s" hooks, took out the hooks and pushed the hole of one end of the strap onto the latch pin. Then, she wrapped the strap around the lid and cut a hole in the strap to make a tight closure. She cut off the excess. This prevents grass from blowing out the edges of the lid, making a neater lawn. While not part of the assembly, a good tip is a steel one inch putty knife seemed to work best when scrapping the underside of the deck, with the blades removed for sharpening or replacement.

@thomrider 4 жыл бұрын

Thanks for the information. I have been lucky that my tubing and lid are still in great shape. Sounds like you came up with some great fixes for the issues. Thank you for watching.

@content9836 4 жыл бұрын

@@thomrider Well, it s chinese made, and as so man Americans shop based only on price, they accommodate our wishes by making things as cheap as possible. The stuff they sell domesticaly is often of higher quaility as the local market semands better quakity for their limited money.

@thomrider 4 жыл бұрын

Valid point

@enriquedelamata6705 5 жыл бұрын

Great video, really help. Thanks

@thomrider 5 жыл бұрын

Thank you for watching

@palatinus712 9 ай бұрын

Thank you, this was super helpful!

@thomrider 9 ай бұрын

Glad I could help.

@1969OLEK 5 жыл бұрын

Ja zdecydowałem się na cub cadet xt2 pr95 i za tydzień trafi do mnie 😎 pozdrawiam 😊

@davidnaumes1750 4 жыл бұрын

Great video!

@thomrider 4 жыл бұрын

Thank you for watching

@jerrywhatsworth3589 5 жыл бұрын

Pretty darn good job thanks !!

@thomrider 5 жыл бұрын

Thank you for watching

@GreenMountainDefense 4 жыл бұрын

Great job man. Super helpful.

@thomrider 4 жыл бұрын

Thank you for watching

@GreenMountainDefense 4 жыл бұрын

BACKYARD WOODSHOP how is your setup holding up long term?

@thomrider 4 жыл бұрын

Green Mountain Defense very well so far.

@libarra426 5 жыл бұрын

Great video! Thank you!

@thomrider 5 жыл бұрын

Thanks for watching

@stephendavis4764 2 жыл бұрын

Once again. Great video. The newer bagger has some minor changes--clear hose, window in hood, and two carriage bolts with washers and lock nuts rather than bolt with wing knob. Don't know if better or not.

@thomrider 2 жыл бұрын

Thank you for watching. I like the clear hose. Seems like it would be easier to see a clog.

@stephendavis4764 2 жыл бұрын

@@thomrider After using it I do like the clear hose because I had wet leaves clog it and could see nothing was going through. Also with window on lid it's easy to see when bags are full. Thanks again for great video. I had in on laptop in garage while doing install.

@msclecarcrzy 6 жыл бұрын

Great video! I was just wondering what let's you know when the bags are full? My old craftsman has a little wheel that stops spinning when full. Just curious

@thomrider 6 жыл бұрын

You have to check you bags to see how full they are or when the mower sound changes you know your completely full bags and the tube, which then you have to take apart and clean out. I just reach back behind me and feel the bags till I think they are getting full and empty them. No indicators on this set up. Thanks for watching and commenting.

@kevinjohannes6262 5 жыл бұрын

Great video. I do have one question for you. If you don't mind, what is the width or your shed door? I am considering the same model XT2 w/42 inch deck. I also have a storage shed and the door is exactly 48 inches. Does the tractor fit into the shed if you tip-up the plastic chute on the deck? My current tractor IH Cub 105 (1968 model) has a 48 inch deck with non moving metal chute and I have to leave it out when the mower deck is installed, which is spring, summer, and into the fall. Thanks.

@coachtmack306 4 жыл бұрын

Awesome Video!! Thanks!

@thomrider 4 жыл бұрын

Thank you for watching

@jrprieto1 4 жыл бұрын

Thanks for making the video, very informative, it'll make it easier for me to install it, what size bags did you get?

@thomrider 4 жыл бұрын

Thank you for watching, I’m not sure what size the bags are but they hold a fair amount. I empty them 3 times when I mow.

@stephendavis4764 2 жыл бұрын

Great video. Very helpful and detailed. Plan on using it tomorrow to install bagger on my CC. And the ramps? Where did you find them? Thanks!

@thomrider 2 жыл бұрын

Thank you for watching. I bought the ramps from harbor freight

@brunot7898 4 жыл бұрын

Thank you ! Really helpful

@thomrider 4 жыл бұрын

Thank you for watching

@marc7491 11 ай бұрын

Great video! One question. I frequently tow a tilt cart which I attach to the rear tailgate hole with the pin and spring clip. Working in reverse it looks like for me to use the cart all I would have to do is remove the bracket assembly that is attached to the tractor by a pin and spring clip. Of course, the bags and chutes would also come off. Am I missing something?

@thomrider 11 ай бұрын

No you are correct

@jeffersononetwo 6 жыл бұрын

Nice - i want one for my older LT1042 - so much for being able to check the gas level with it attached :)

@thomrider 6 жыл бұрын

Thanks for watching

@BettyStolte-hm5tg 3 ай бұрын

Thanks it seems easy I think I can do it

@thomrider 3 ай бұрын

Yes you can

@10p6 5 жыл бұрын

Nice Video. It is bizare with lawn tractors that one has to go to so much effort to add a bagger. Every lawn tractor should have a simple mount on the top back for the bagger, and the only thing to connect should be the nozzle.

@thomrider 5 жыл бұрын

Thank you for watching

@steveniannelli2954 5 жыл бұрын

crazy question. so to attach a hauler you gotta take off the whole bagger assembly because the mount is using the latch hole?

@thomrider 5 жыл бұрын

Your correct.

@stephenmartini5890 4 жыл бұрын

This was a good instructional video of mounting the bag system. However, there are some points that I don't like...first, the mounting bracket that utilizes the trailer hole, second, those bags are really small like office waste can size. Unless they have larger bags it would take many stoppages and repetitive emptying procedures. Plus, does the lid lock down the bags to keep them from sliding out if going up an inline? This was not addressed.

@thomrider 4 жыл бұрын

I have about an acre to mow. I usually have to empty the bags 3 times. The lid does lock down to keep the bags from sliding out. Thank you for watching.

@BIGSHUNN 5 жыл бұрын

Nice Bro!!! 👌✌👍

@thomrider 5 жыл бұрын

Thank you.

@corpsiecorpsie_the_original 6 жыл бұрын

How difficult is it to remove the metal frame? I want a bagging system, but I've got limited space where my Cub Cadet is parked, so I'd have to remove it every time

@thomrider 6 жыл бұрын

It's pretty easy you just pull out the hitch pin and lift it off the hooks.

@keaganthorify 6 жыл бұрын

Thanks for the video! I can’t get the chute inside the ring of the deck. Is there a trick to it?

@thomrider 6 жыл бұрын

no trick it should fit if its the correct chute. I just whiggled mine and it dropped in. Good Luck.

@keaganthorify 6 жыл бұрын

BACKYARD WOODSHOP thanks for the quick reply! It’s a Cub Cadet bagger. I’ll place the lip on the inside of the deck frame then as I try to position it for the final wing nut the bottom pops out.

@thomrider 6 жыл бұрын

keaganthorify perhaps the chute is not formed correctly. You can call the help line maybe they can send you another chute.

@radzillo 9 күн бұрын

Nice video. Buying 2020 used XT1 46” for $950 but I have to purchase a bagger though. BTW where did you get your shed ramps?

@thomrider 8 күн бұрын

Thank you for watching. The ramps are from Harbor Freight

@NGU09513 3 жыл бұрын

Thank you!

@thomrider 3 жыл бұрын

Thank you for watching

@simonbelmont65 2 ай бұрын

So I have a cub cadet rider mower a newer model and I had the mulching kit put on and it makes a mess and leaves a bunch of dead grass in my yard. I did put on the mulching blades too. Can I use the bagger with the mulching blades or do I have to put back on the regular blades?

@thomrider 2 ай бұрын

I am not sure if the mulching blades have enough lift to use the bagger. You would have to ask your dealer or just try them out.

@lencarl6701 3 жыл бұрын

Is it easy to to take the tubing on and off frequently? You make it appear so. I live where it is often wet & foggy in the morning or three. Being impatient also, I do not like waiting until dry, so....easy on & off the tubing?

@thomrider 3 жыл бұрын

Yes it’s really easy to take the tubing out and clean it and replace it. But once your inside tube gets wet grass wants to stick constantly. I try to wait till afternoon or evening to mow because of it.