Odcinek 156 - Cz 2 Assembly balustrada na schodach, słupki poręcze, maskownice /
In the workshop, I was even cut to size with a K690s format formatter, a gluing unit that will serve as a masking device on the floor and sand with a triton eccentric sander, and drill the screw plugs. On site, I'm going to install the posts that will be bolted with long screws to the pins pegged into the wall. The balconies on the balcony are mounted to the floor with double threaded screws. I attach the masking boards to the floor with Kleiberit 501 pur polyurethane adhesive. I glued the posts with Kleiberit 303.2 and squeezed with wolfcraft screw clamps. I attached the handrail to the posts with spax screws. All edges were chamfered with a radius cutter. I blinded the holes after the screws with previously prepared oak plugs.