Securing of two wall brackets, in two different ways, one on metal corbels and the other with chemical sealants… 👇
We also take the opportunity before the installation of the wall brackets to put back into service a front tie rod which gave way under stress with the deformation of the building.
Still some small structural work to finish on this floor.
⭐ A boost to our project?
- TIPEEE 👉 bit.ly/2tDzJwG
- PAYPALME 👉 bit.ly/2NvteVJ
ℹ️ Marsh plaster
1 volume of sand 0/2
2 volume of air lime CL90
3 volumes of coarse plaster
It is imperative to use air lime under penalty of expansive ettringite (see sources below) and a plaster without additives. Plaster hardens faster when it is not mixed, unlike lime. Only stir the part that will be used to prevent the mortar from setting too quickly.
As a reminder: we are not experts, we are only showing you how we do at home. If you take inspiration from our accomplishments, don't try to emulate what we do without understanding the issues and educate yourself on what is right for you. Be inspired by several sources, we could be wrong.
00:00 | Salvation
00:46 | Do I have a hangover?
04:25 | Wall mural on crows: preparation
06:19 | Pose of crows
09:04 | Wood preparation and assembly
11:00 | Final installation of the mural on corbels.
11:42 | Wall mural with chemical sealant
13:51 | Preparation of wood and holes
17:24 | Sealing the rods
18:58 | Installation of the mural
21:34 | Repair of the front tie rod
26:02 | End of work on the 1st
Sources:
www.bricozone.be/t/plancher-s...
constructionbois.bilp.fr/guid...
constructionbois.bilp.fr/guid...
faisons-le-mur.com/mortier-ch...
www.groupe-sma.fr/WebCommun/W...
duquesne.typepad.com/files/en...
www.patinesbio.com/2016/11/qu...
#wall hanger #floor #stretching