Рет қаралды 9,032
Note: This product is not applicable for breathable, dusty, damp, uneven and porous surfaces, such as log walls, limestone walls, natural marble, natural granite, curved surface, painted walls, etc.
How to install
1. Please clean and dry the expected place before install, make sure the bottom of suction cup is clean.
2. To make sure it is in pre-installed state, please gently twist the knob cap in an Anti-clockwise manner until can not rotate.
3. Push the suction cup perpendicularly into the expected place, push firmly on the stud/hanger shaft and turn the knob cover by hand to release air. ( At first installation, please remove the protective cover )
4. Keep pressing the center firmly, spin lock to the right until hear a "click" and feel a substantial lock of the locking suction. Then pull the suction cup left and right for testing.
How to remove
1.Vigorously rotate the suction cup’s knob cap anticlockwise until it can’t be rotated.
2.Pull up the “release tab” to release the suction cup and remove it.
3.Wash the bottom of the suction cup with water, reuse it after drying.