Installed a HUGE air intake on my Escalade V but was it worth it? Also LARGE engine purchase!

Рет қаралды 29,592

Күн бұрын

In this video we install the all new S&B air intake specifically made for the 2023+ Escalade V but was it worth the money? Also my new ZZ632 crate engine arrived now time to find something to install it in!
Social media:
Facebook: Stangkilr productions
Instagram: justinkeith_sct
Tiktok: Keithallen
Wear what we wear:
street-car-takeover.myshopify...
Killer Performance KC
www.killerperformancekc.com
justin@killerperformancekc.com

Пікірлер: 66

@StangkilrProductions 7 ай бұрын

I would say for a no tune intake its probably worth it! Its also currently the only option out right now for the V

@TheWolfMatt 7 ай бұрын

I have the exact same CAI on my 19 GMC Denali 6.2L and it made a world of difference. The biggest issue you have is the cooling fans all stuffed in the way. There's loads of room in front of the radiator, maybe place the fans ahead of the radiator for a pusher system over puller, then you should have enough room to run a much larger tube for that monster air filter. Honestly, that thing is HUGE. Beautiful ride though, would love to have one of those someday. Maybe see if that ZZ632 would fit under there..... 🤔

@typedrew 7 ай бұрын

It’s the truck itself. The sound deadening.

@Ray00069 7 ай бұрын

As long as it’s enclosed and keeps the heat away from it. It would be beneficial and not lose horsepower.

@StangkilrProductions 7 ай бұрын

Yeah for sure! Definitely a good design

@NXT_LVL 7 ай бұрын

All depends on where it draws air from. My truck drew from the inner fender, with the liners it basically drew from that via the "director" it had in front of the wheel. So pulling inner fender heat, tire heat, road heat... and ambient engine bay heat. 3D printed a Ram style air intake to start by the grill and attached to the front of the OEM box (where the stock "horn" went to the inner fender). Today my AIT was reading about 65... when it was 58 out this morning.

@SnickersG-fu2pw 7 ай бұрын

NO WAY! It's like you read my mind to build a truck with a 632 GM crate motor. I was going to comment that and you just unboxed it on this video. That's awesome baddest crate motor GM ever produced! 👍🏻

@SnickersG-fu2pw 7 ай бұрын

You find the cleanest 90's trucks I've ever seen and with very low mileage. Keep up the great content. Very cool! 👌🏻

@RAVES5803 7 ай бұрын

Go check out Motion Raceworks "shop truck" might be something you like there......

@danorourke5184 7 ай бұрын

This channel always has the baddest cars and trucks I’ve ever seen! I get all excited when I see you have posted a new video! Lol

@StangkilrProductions 7 ай бұрын

Much appreciated man

@Justin-bz1dp 4 ай бұрын

@@StangkilrProductionsis they a kn in car

@Black66 7 ай бұрын

Love the channel. Always liked the attention to detail on all the projects.

@chesspiece81 7 ай бұрын

S&B intakes are incredibly nice and have TOP NOTCH customer service. Love the 1000HP NA ZZ632 crate motor and hopefully you cross 100k subscribers before Christmas.

@BenjySparky 7 ай бұрын

Justin and Killer Performance, y'all rock! Love the V that thing will haul the mail. Still saying 99.9k, but congratulations on the 100k. Peace

@micahtv1763 6 ай бұрын

Keep the Escalade V mods comingggg😫 there’s not enough content on them and I love your whole build 🤗

@Slowwsierra239 7 ай бұрын

Almost at 100k subs!!! Starting watching when it was below 5k. Awesome growth!!

@CruzSoClean 7 ай бұрын

We love Escalade V content!

@arielisbusy 7 ай бұрын

That engine tho😮

@blackadam1968 7 ай бұрын

make longer videos bro i love watching this channel

@funkyfpv9847 6 ай бұрын

Ohhhh getting those LMP goodies 🫢🤗🤗🤗

@dustin5941 7 ай бұрын

Shout out to Robert! Built a beautiful engine

@Steverex527 7 ай бұрын

I didn’t realised how big your workshop is, massive

@Steverex527 7 ай бұрын

Arh I just needed to watch more of the video 👌

@ATS-VRACING 7 ай бұрын

FYI. The escalade v doesn't have the DOD lifters or oil holes to block off. The block comes with no dod oil holes.

@MidwestMotor 7 ай бұрын

Oh man - you are SO CLOSE to 100k Subs!!! How many more do you need? The Highway - great music station! And great video BTW! 🏁🏁🏁🏁🏁🏁🏁🏁

@StangkilrProductions 7 ай бұрын

We got it! Thank you!

@MidwestMotor 7 ай бұрын

@@StangkilrProductions WAS IT ME? I saw your video this morning and it showed 99K subs then I subscribed - that would be cool! 🏁🏁🏁🏁🏁🏁

@MrGoofygiz 7 ай бұрын

Let’s go

@bigfootgarage2201 7 ай бұрын

I wish you could put a 10 speed behind that 632 and have that in a clean OBS Chevy nice custom exhaust out the back

@StangkilrProductions 7 ай бұрын

That would be cool! While I have thought about it I don’t think it would work very well lol. This needs a 4L80E

@bjfrazier4895 7 ай бұрын

When we getting the burnout video?!?! I see a 100k subs! Congratulations Justin!!

@StangkilrProductions 7 ай бұрын

I’ll be working on it!

@CraaaigV302 7 ай бұрын

Dam i absolutely love those 632 crate engines whole turn key plug and play pump gas ready bolt a trans to it and go 1000hp naturally aspirated fuckin BEAST curious to see what you guys put that in

@StangkilrProductions 7 ай бұрын

Yeah pretty nuts if you really think about it

@CraaaigV302 7 ай бұрын

@@StangkilrProductions yea it is id love to have one of these

@thegonz7833 7 ай бұрын

looking forward to more V 100k tonight?

@StangkilrProductions 7 ай бұрын

It’s looking like it

@FernyB58 7 ай бұрын

Cadillac messed up on that intake/tb location it’s sitting basically right on the cooling fans imagine the IAT’s on a hot summer day😭

@kylenorris7156 6 ай бұрын

When is the Cam swap coming?! Can’t wait

@StangkilrProductions 6 ай бұрын

It’s happening now! Video up tomorrow hopefully

@dukenukem7183 7 ай бұрын

Gale Banks probably has something to say 😂

@dannykirby7023 7 ай бұрын

Def don't put it in an obs I can think of 3 already but put it in a square body or a cat eye to be different

@StangkilrProductions 7 ай бұрын

That’s kind of what I do though lol

@dannykirby7023 7 ай бұрын

@@StangkilrProductions I know, I know I loved watching the lt4 builds and you were the first that I know of but on this you wouldn't be so find a chassis to be the first at.. just my 2cents

@392Cherokee 7 ай бұрын

That big girl gets down tho… 😮

@RadDadisRad 7 ай бұрын

Build a 454SS clone but make it say 632SS, or do 454SS and make people scratch their heads with how much bigger it sounds 😂

@StangkilrProductions 7 ай бұрын

I have an idea i think I’m going to run with it. Y’all will love it

@RadDadisRad 7 ай бұрын

@@StangkilrProductions I can’t wait either way, always doing cool stuff.

@roadrunnerkhalil 6 ай бұрын

Video starts @ 9:10

@TheSaucedo123 7 ай бұрын

$30k rite there.

@abd8167 6 ай бұрын

كم مصرف الوقود

@jordangryg5442 7 ай бұрын

what is "pretty decent " car cost for you lol

@StangkilrProductions 7 ай бұрын

I don’t even know anymore lol

@alecaagaard 7 ай бұрын

Yup, add to cart, not the intake, the escalade.

@cjcoleman7372 7 ай бұрын

More zippy. Is that a technical term? Lol

@StangkilrProductions 7 ай бұрын

Lol sure it’s mine!

@demetriusgriggs2757 7 ай бұрын

Straight pipe it and you will hear it

@horsecockexpress7612 7 ай бұрын

that weighs 10,000lbs it doesn't matter what you do to it

@yamahaguy1732 7 ай бұрын

Which makes it much more impressive that it is as fast as it is. I can personally say these things are a blast! One of the most fun things I’ve driven.