Installing A Custom Interior On A Toyota Tacoma

Рет қаралды 7,293

Күн бұрын

Installing a custom interior on a 3rd gen toyota tacoma. The trim panels are reupholstered in an outdoor vinyl made to look and feel like tooled leather.

Пікірлер: 45

@nattyfixit2898 Жыл бұрын

Hey folks just wanted to clarify that the video does not show the drying time between applying contact cement to the surfaces and adhering the materials together. Contact cement must be given enough time to get tacky before adhesion.

@Joes432 Жыл бұрын

Jesus man this should have much more views. I did this to my mustang but bought pre-fab pieces for it. Came out fantastic but man what you did is truly custom!

@nattyfixit2898 9 ай бұрын

Thank you! It was a fun project, I'm glad you enjoyed!

@taco2k3 Ай бұрын

Awesome. Like others I’ve been considering doing this as well. Thanks for the step by step process. This is one interior mod I look forward to doing. 👍🏼

@gonchaplayz 3 ай бұрын

This is something I always wanted to do but after seeing the sheer amount of work involved I think I’m gonna have to pass, thank you for going through everything so thoroughly and I applaud your craftsmanship!!

@nolandoverboard Жыл бұрын

love that you went with some brown for your army green! such a good color combination. looks great!

@nattyfixit2898 Жыл бұрын

Thank you! Green and brown is a hard combination to beat!

@resxramlrakplz 11 ай бұрын

Exactly the video I needed. Thank you.

@petegarcia8567 7 ай бұрын

Looks nice i been wanting to do this to my Tacoma

@reyeseuropeos9153 Жыл бұрын

Great work man And a great colour to go with the army green

@nattyfixit2898 9 ай бұрын

Thanks man! Appreciate it

@Doc1855 3 ай бұрын

My 23 TRD Off Road, double cab, 6’ bed has the Premium and Technology pkgs. I really HATE Black interior and my truck came with Black Leather, so I’m saving up for Katzkin to make Burgundy Leather seats for my TRD. After Katzkin removes the black leather seat covers and installs the Burgundy Leather, then they will remove my friends Gray cloth seat covers and install the Black Leather from my truck. I am wanting Katzkin to remove the Black inserts from my doors and dashboard and replace them with the Burgundy color to match my seats.

@joshuahasegawa 3 ай бұрын

Came out great 🤌🏽🤌🏽🤌🏽

@tomsemo8186 3 ай бұрын

O Man !!! Excellent. I have been searching internet for this exact mod. Well done. I have soundproofed doors and upgraded speakers so i know how to remove door panels. The dash panel i thought had a airbag in it so i never went forward with mod. To bad you didn't show how to remove dash panel. Thankx, i have subscribed and will check out your channel. Tom

@samuelwest9467 10 ай бұрын

Your build would look soo good with some light brown leather seat covers. It would match the reupholstery very well

@nattyfixit2898 9 ай бұрын

Thank you! Definitely something I am considering

@richardclause2852 9 ай бұрын

Looks awesome.

@nattyfixit2898 9 ай бұрын

Thanks Richard!

@goldblueberries326 Жыл бұрын

Great job 👍

@nattyfixit2898 9 ай бұрын

Thank you!

@jesusisking5614 Жыл бұрын

Awesome job brother , I just bought a 3rd gen Tacoma , and I'm gonna do a pattern on mine to customize it

@nattyfixit2898 9 ай бұрын

Thank you! Make a video when you do, I would love to see the end product.

@roymonroe8524 Жыл бұрын

the upholery you picked only matches your shorts :) not the truck but awesome vid good job on showing how to do it

@nattyfixit2898 9 ай бұрын

Haha thank you!

@justdoit1290 6 ай бұрын

Center console next ? . Looks great bud 🤙🏽

@Doc1855 3 ай бұрын

Your truck looks great ! Are you having Katzkin make you leather seats to match the door and dashboard trim ?

@stay4theride Жыл бұрын

This is so freaking cool. Please tell me you have a pair of cowboy boots to match! Awesome!🤠

@nattyfixit2898 9 ай бұрын

Thank you! Ha not yet but maybe I should!

@cutejonbraswell Жыл бұрын

This is freaking awesome very king ranch or high country ish…how did you wood grain the trim panels?

@nattyfixit2898 Жыл бұрын

Thanks man! That was a big part of what I was going for, always loved that style. I found the wood grain on Amazon! I’ll see if I can attach a link below. They are attached with double sided tape from the seller, they lay surprisingly flush but I may remove the tape and use a liquid adhesive for an even more flush/factory look. I could be wrong but I believe the woodgrain look was made on these pieces by hydro dipping. Car ABS Inner Look Central... www.amazon.com/dp/B09C62SBMF?ref=ppx_pop_mob_ap_share

@richardrodriguez1128 3 ай бұрын

The wood grain trim around the radio is wrapped also?

@AdrianAlcaraz-oy5qe 5 ай бұрын

You think a JB weld glue can hold those screws at the end?

@Doc1855 18 күн бұрын

I need mine done in Lava Red to match my Lava Red Katzkin Leather upholstery on my 23 TRD OR, DC, 6’ bed with the premium and technology pkgs. I HATE the factory Black leather interior

@edwincabello8887 10 ай бұрын

Hello. Awesome video. Great details about the process. Question: For the four doors panels how many yards of vanilla fabric I need to buy (any measures about the length in yards. I would like to get it in black. Thank you for sharing. BTW my door are exactly than yours.

@edwincabello8887 10 ай бұрын

***vynil fabric ***

@nattyfixit2898 9 ай бұрын

Thanks Edwin! I ordered one standard yard and it was more than enough for all 4 doors.

@forrestisaacson5094 10 ай бұрын

Where did u get this tooled looking vinyl from?? I’ve looked everywhere, found something similar, but it has flowers in it and I don’t want flowers lol, thanks great job by the way!!

@nattyfixit2898 9 ай бұрын

Thank you! Appreciate the kind words. Here's the link for the vinyl I used, I believe they have a couple of color options as well. www.fabricguru.com/pvc-fabric/richloom-valpariso-embossed-vinyl-upholstery-fabric-saddle.html

@spencerminton2540 Жыл бұрын

What kind of vinyl did you get for this?? I’d love to do this to my Tacoma but dont know what kind of vinyl to buy, obviously not the run of the mill decal vinyl.

@nattyfixit2898 9 ай бұрын

Here's the link to the vinyl I used, it's from a company called Fabric Guru www.fabricguru.com/pvc-fabric/richloom-valpariso-embossed-vinyl-upholstery-fabric-saddle.html

@nicholasgilson1412 11 ай бұрын

What part number is the weatern fabric or leather? Or where do you get it id like to do a different color in my quicksand taco thank you and no one has said how to do this on forums ive searched big help also what size screws and how far did you have to drill in that part worrys me i dont want to drill into the fabric lol i always worry way to much doing stuff like this

@nattyfixit2898 9 ай бұрын

Here's the link to where I bought it. The company is Fabric Gurus and I believe they have several color options as well. Unfortunately I don't recall the length of the screws, but I had the same concern and went with pretty short screws. Doesn't take much for the screw to grab on enough to hold it thankfully. When I had it apart I was able to get a better idea of what length screw I needed to make it work. www.fabricguru.com/pvc-fabric/richloom-valpariso-embossed-vinyl-upholstery-fabric-saddle.html

@nicholasgilson1412 9 ай бұрын

@@nattyfixit2898 awesome thanks I'm gonna do this to my tan Tacoma think it's quicksand or something like that would like to find a matching color in that western style would look amazing