You have taken advantage of space and attention to detail with your set up. Nice job.
@psementalist5 жыл бұрын
That's a good beginner bass knob that stinger one you did a sweet job at installingtgat bass knob. I've upgraded to my Slam Panda bass knob i love it i got my RCA's from sky high car Audio
@brandonthompson99575 жыл бұрын
"Beginner bass knob" lmao people with $20,000 builds still use LCA-1s I have no idea what you're talking about.
@psementalist5 жыл бұрын
@@brandonthompson9957 Look on my KZfaq channel under Slam Panda bass knob then you'll know exactly what I'm talking about.
@brandonthompson99575 жыл бұрын
@@psementalist I know of the bass knob. Just because it's more expensive or made out of a better material, or has a volt meter lol doesn't make the way it works any different than an LCA-1. Same thing
@psementalist5 жыл бұрын
@@brandonthompson9957 Brother I'm not arguing with you about that i got my Slam Panda bass knob just because i was upgrading everything else in my system rebuild up . Mine doesn't have a volt meter built into it i wanted something that was totally customized to my personal likeness in this case it was to match my car's name of Praisenator its blue and I love the great job they did on it . My volt meter happens to be stinger its worked great over 9 yrs
@drupey18785 жыл бұрын
Beginner bass knob?? Is that even a thing??
@Karopine4 жыл бұрын
This is the solution I was searching for. I was having the problem of my Pioneer Z140 just seemed to little/much bass as my songs weren't equalized. So I was always chasing the right level through settings per song. This solves it. Ty JAB, liked and subscribed.
@johnviera38842 жыл бұрын
Awesome video man. This is how you do it!
@efjay50425 жыл бұрын
Jeep’s and civic’s ftw 💪🏼💪🏼💪🏼
@phockuahole5 жыл бұрын
Win what? Shitty car award?
@benjaminmadrigal7533 Жыл бұрын
Hey thank you for making this video, it was very helpful!
@KHFilms4 жыл бұрын
"I don't know if I can do it one-handed Lee" Way to go KZfaq captions!
@majorwilkesjr.58275 жыл бұрын
I know what you're saying about the light on the knob. I have an Audiopipe 3K. That blue bastard lights up the entire front end of the truck. It's a ticket waiting to happen.
@majorwilkesjr.58275 жыл бұрын
But I love the amp . The light on the amp and on the knob are cool . I just have to angle them in a way that the light is not shining where it draws the wrong attention.
@arturobolanos1404 Жыл бұрын
Fantastic job
@501Patrick4 жыл бұрын
You need a tripod man
@PincheBeto_Bass2 жыл бұрын
I did this in my truck for the epicenter knob. Just didn't make a video of the tutorial, I just have a video of the final outcome if you want to look at it
@MazdaBass9715 жыл бұрын
Good shit Ray!
@sushilthakur942 жыл бұрын
Way better 💛
@niharneerahoo1014 жыл бұрын
That's a very neat build
@nialless3 жыл бұрын
Looking at getting one similar but being cheap and chinese I'm worried they may introduce noise. There doesnt seem to be any premium branded ones. Has anyone experienced this?
@panamacolon049 ай бұрын
Nice
@mrfacecaser40095 ай бұрын
So does my subwoofer need to be connected to head unit or just the bass knob
@easylooker48895 жыл бұрын
Good video. Looks like the kind of bass knob you could install if you have a Brazilian amp since they don't come with one. Also could you put some kind of tint on the clip indicator light to knock down the intensity of it?
@eazy2hate2 жыл бұрын
Ur damn head unit can cut the subwoofer off and it only takes 2 seconds lmao the bass knob does exactly what it needs to do
@rodroberson13415 жыл бұрын
Great vid, Ray, I'll be looking for that clipper light install!
@boominc04205 жыл бұрын
That's exactly what I did in my 01 integra without any glue
@davef.5665 жыл бұрын
hello you can use a heat gun to remove the scratches and nicked areas
@renec03275 жыл бұрын
Good idea thanks
@davidbrooks54072 жыл бұрын
How do I install a bass control SGC200 dual knobs: one for frequency and one for gain?
@jahangirabdulqadir68375 жыл бұрын
nice work👍
@geovannimedrano155 жыл бұрын
Yupp thats true that happend my audio pipe bass knob i didnt cut all the way my subs thats why a got a unversal bass knob
@geovannimedrano155 жыл бұрын
Lc1 thats my bass konb
@Rovin65 жыл бұрын
nice work ... u need a camera tripod instead of trying to work & film at the same time
@MayhemXo5 жыл бұрын
Thats weird cause my power acoustik knob seems to turn the amp all the way off for me only problem I seem to have is from time to time it seems it'll like stick and nothings been spilled on it etc it will just get hard to turn every now and again
@Bugglebub2 жыл бұрын
Headphone warning at 12:40. Ouch.
@MAKSKAYY3 жыл бұрын
😂😂😂 @1:54 #fvck yo couch(driver seat version)
@denisllaw4 жыл бұрын
standart remote ( monitor ) bass knob or rca bass knob is better for project ??
@Grizzly36483 жыл бұрын
Dam Is this you're first video 🤔
@jaysonalberto83133 жыл бұрын
Nice bro..
@jasonneal3 жыл бұрын
Does that Stinger potentiometer cut out all the bass when turned all the way down? And does it give you full signal at wide open?
@michaelferraro46053 жыл бұрын
I have a quick question on this, sorry I am a bit of a beginner when it comes to this kind of stuff. So I want to install a bass knob in my car, which already has a sub and mono amp wired. Would I basically be unplugging the rca from the head unit to the amp, and wiring the knob "in between". So it will go from head unit, to the control knob, then back into the rca on the amp (where it is currently wired to?
@Adamdlg042 жыл бұрын
We’re you able to find out? If so can you help me out? Thank you!
@eazy69ful5 жыл бұрын
How to set a sub amp bass knob using the smd dd1
@BEAZY_51502 жыл бұрын
12:42 volume alert, don't let it interrupt your muted porn! Wait, what?
@Mr009mm5 жыл бұрын
Where did you get that. I want to get one for my skar lp1000. So i dont have to have my seat down to see the clip light. Usually only if I have other in the car is why. But I cant find it on amazon or even on the stinger site.
@JeepAndBass5 жыл бұрын
For the skar amps you'll have to extend the light directly from the amp since they dont have external clip lights
@unsafestcolt27664 жыл бұрын
Idea: invest in a gopro and head strap
@carlosrogeliomartinezcruz1090 Жыл бұрын
Cuato bake
@martinramirezmi54572 жыл бұрын
Actually I think that was one of the best looking years of hondas, now they just look ridiculous.
@JeepAndBass2 жыл бұрын
I thought that too but I own a 2019 Si and honestly like it more the longer I’ve had it. The old ones look “old” to me now.
@martinramirezmi54572 жыл бұрын
@@JeepAndBass I still don't like the new ones. I had a 1998 acura integra gsr and wish I still had it. The RSX they replaced it with just doesn't have the same character.
@josecantu42862 жыл бұрын
Gave me a headache looking at it upside down
@CORZER05 жыл бұрын
Input, otherwise known as source, maybe?
@savionsmith74185 жыл бұрын
Ditch the dc knob. They hurt your signal.
@Fefitoly4 жыл бұрын
Hey does anyone have a link for the Taylor switch song at the end? I need that shit
@sagerr7354 жыл бұрын
Blank space
@MrSpanky4735 жыл бұрын
Why doesn't everyone just use the sub control that's built into the head unit?
@spincr4hire725 жыл бұрын
not the same
@MrSpanky4735 жыл бұрын
@@spincr4hire72 explain please. Don't they both cut or fade the signal coming into the amp?
@owentroyer5 жыл бұрын
Sinister yes but not as fast. most people set gains accordinly and then use knobs to turn up and down with different songs or when you want to just turn it down slightly. It's much easier when driving to use a knob and you can get more fine control. also when you use the sub control settings in the headunit it messes with your signal levels. while all the way up on a knob is just 100% signal, while all the way up on the headunit is higher than 100% signal(clipping) there are exceptions to what i said but overall that's reason why. I hope this helps explain more
@SiouxFalls7774 жыл бұрын
Get a tri-pod
@RawbAtLivedotca4 жыл бұрын
that song tho.... hah
@MrGameFly3 жыл бұрын
Jesus man just put the camera down and use both your hands lol