This type of repair requires a high level of expertise. You're amazing, Tevz.

I really appreciate what you do. Sometimes Struggling to fix the tv with one hand so that you can video tape the process to educate us is really amazing. Only a few can take that privilege

congratulations for your new multimeter ❤

This is to far level for me Even if I watched this video much times. Only engineer like you sir can do this. Usually I download your video and I watched much times as I can so I can understand it. But sometimes when there are to much modification I can't understand it. Need to learn a lot from you sir. Good job 👍 ❤️

2:51 EXCELLENT UPGRADE!

Fluke good quality

good work tanks very much

Nice video

Thank you very much sir

Very nice job. Never hear about a universal tv board, good to know.

Thank you for sharing high-quality maintenance knowledge with everyone. Upvote for you!

Good for you. you deserve a good Fluke multimeter Tevz

Amazing fix! Probably no one fixes this tv as you did in my country. They offer to change board or chip with original one which is almost as expensive as the TV itself.

Very Very Thanks Sir

Really excited 😮❤

Salamat sa pagshare sir tevz..

great job ❤

just imagine your clients say do whatever it takes to make it work this will be the outcome all credit to the technician who know his stuff. 👍

Very good idea for PFC on/off

Good day sar ,Thanks sar,keep up , that's great

nice mod your channel is the best i have seen.the audio translate iwas the best idea to get many views...where do you get the universal board ...keep up the good work

when will i be this good wow good work tevz

i cant doubt your expert skills sir.. i learned alot from you. But, sometime im very scared by seeing your soldering technique.. but its ok as long as its solder doesnt make any shorts circuit.. cheers sir 🍻

Welcome "Fluke"!

Good boy

I like your videos. Thank you. That is really awesome work.

good jop mr tevz

And lalim n sir ng knowledge nyo said electronicss

galing mo talaga master tevs.. anong sikreto ba para matuto ng ganyan? sarap manood👍👍👍

Very nice way of working and explaining

Very Very good your vídeos, amazing, congratulations

Congrats mang tevz

Nice sir

Hello Tevz, better if you work with new capacitors even to show us how to fix it. The multimeter is great of course because Fluke offer the best Insulation and protection on their multimeters also measure with high Frequency which mean more precision when measure voltage with frequency on power suply Chopers. Be careful when you measure voltage and Current with those probes and choose the beter with more insulation for do not fail when you are runing with diagnostics. Try TP80 but from MC brand, the Fluke sell those and are perfect for Nano technology. If you see today TP80 from Fluke with very small point and cover colored protection are not so good but if you see those from MC with transparent covers that mean very good. I don't know why they change those because they was perfect many decades. Must be writing on probes MC not Fluke.

Nice explain for pfc connection

nice master class thanks very much👍👍👍

Perfect well made repair video.

nice one sir, i really enjoy every bit of it.

Good day sir nice your video sir

it's great 👍

Good morning 🌞🌄

Thanks sir ...

Truly amazing!

Big up Boss ☺️ the upgrade nailed it all😲 if you won't mind sir send me the older one multimeter 🙏

Good morning Sir Have a nice day. 🙏👍

Great video always ❤

Very experienced led tv nolege

amazing work tevz! congratulation!

Good

u gotta be a major engineer

z1o tevs sir informative vidioe

Hi dear Mr tevz It was really great. But I think I never could be able to learn that cos connecting wires of new board are very hard and there are several items to do and to know specially the trigger protocols is confused able I prefer to get a new or used main board for customer and not found give it back to him that,s it.

Perfect

Great video like always ❤

Wow, your videos are awesome! Maybe I missed it but I did not see or hear a part number listed for the universal board or a source to purchase it from?

Hi. Tevz missed you

Those LG TVs from around 2012 all seemed to fail due to that chip overheating and separating from the board. In the UK I remember a lot of these TVs being scrapped because even a replacement board from a broken TV would do the same thing a short time later. It's interesting to see these universal boards being used - here it would cost almost as much as a new TV to get someone to do the work you've just done on the set, as it takes skill and time to do it. Is the picture quality as good with these boards? With your level of skill I think you could make a fortune in Europe or the USA!

👍👍👌👌

👏👏

Good job on the PFC & 12v separation, I did similar to a Sharp 52 inch but psu only hd 15v output :(

Congrats lakay😊,,anya gamit mo gayam panagbuttaw mo dyay plastic pra agidyay input mo nadalus panang buttaw mo lakay hehe

Muhteşem ❤❤❤❤

Is there a website you can recommend for electronic repair training? other than you 😀

en mi pais ,no ceptan este tipo de trabajo..

Hmmm. I have been doing this conversion. You just struck me with this new pattern. Seriously i don't understand why and what you did to the PFC. I will only connect the PS to the 3.5V and thats all . Can you please explain what happens if i dont separate the PFC. Is this method only applied to LG power or every other brand.?

Hi Mr tevz again. Something I remember to ask you ! Why did not reball the ic of mainboard once may be it solves the problem!!! What do you think?!

CIRCUIT WIZARD!

Most expensive fluke multimeter 😮😮

Hi Tevz. This stuff with converting tvs is cool. I would like to try it on my old Sony tv. Is this board has a DVB-T2 tuner? if not, which cheap board has it? Regards.

Sir l am frome India I like your video but unvershal board installed iam not interested but mistake is there

Where do you got the Fluke 289 from? Some lucky find?

where to uplod this firmware panel

А что с родной материнкой, и в блоке питания нужно пропаять все микротрещины. И не жалей флюс.

My microwave isnt showing any channels. Can you fix it?

Basta ilocano nalaing taga ano ka boss loc mo?

Where did he place the resistor between? I find it almost impossible to follow what is being said.

Clever but soldering?

I also have to buy a good and expensive multimeter, my primary one is got damaged during continuty test😢

We're ru from

Need USB software updation of under universal android (S368A1.5 )smart led tv

Lovely but still not At this level

PFC meaning sir

Fe

Sir bka nmn pweding tagalogin mo nmn kc kramihan pilipino Ang nanunuod sayo pano namin maiintindihan ng mabuti sana may tagalog k nman sir

use the fucking Flux..

FFS learn how to solder!

I should have to replace the chip 1000 times! That is awesome but tooooo demanding!

That would be wrecked for parts in OZ as no one would pay to repair an old pile of crap like that, just way too uneconomical.

🙏𝙸 𝚊𝚖 𝚜𝚛𝚒 𝚕𝚊𝚗𝚔𝚊🎉𝚛𝚑𝚊𝚗𝚔𝚜