Installing aftermarket headlights on 02-06 Cadillac Escalade

Рет қаралды 39,566

3 жыл бұрын

So my dad purchased some aftermarket headlights for his 2002 Escalade and I installed them in under 15 minutes with only a 10 mm socket and a screwdriver link for plug and play lights
www.carid.com/spyder/2003-cad...

Пікірлер: 61

@lewizvega6623 3 жыл бұрын

Thank you so much for helping me out with those lights, I like the soft tint on the cover of the lights, but not the popped bug eyes, don't look that good, but good job! Thanks!

@alonzo5.040 3 жыл бұрын

Yeah I don’t understand why they did that

@LamontBoucherville 3 жыл бұрын

Looks fantastic

@alonzo5.040 3 жыл бұрын

Thanks I appreciate it !

@rosiahguizar200 3 жыл бұрын

they look really good

@alonzo5.040 3 жыл бұрын

Thaaaanks

@truckdriver534k2 3 жыл бұрын

Frrrrr

@mattmccoy2410 3 жыл бұрын

Those are some bad ass lights

@alonzo5.040 3 жыл бұрын

Thanks man I appreciate that! 🤙🏼

@andrugaming2768 3 жыл бұрын

They look nice

@alonzo5.040 3 жыл бұрын

Thanks bud!

@imran4811 3 жыл бұрын

Turn on the light dude

@MooreGravy 2 жыл бұрын

Not all these factory Escalade headlights are the same. My 05 has the HID wire going into the housing underneath the harness plug. I didn't go the LED conversation route but wanted to comment for future views. I had to run that HID out of my stock housing and in thru the new ones I'd bought.

@alonzo5.040 2 жыл бұрын

Thanks for the info 🤙🏼

@roj30001 Жыл бұрын

Wait my Escalade has HID’s so you have to do what now

@MooreGravy Жыл бұрын

@@roj30001 For the headlight housing I bought off Amazon, which is a good one BTW, I had to "thread" the HID wiring out of the factory housing and run it through the new headlight. My low beams are HID. But these Escalade headlights aren't all the same.

@DiegoElCharrua Жыл бұрын

I've had these on for a year and I fucked up cuz my 05 is also factory hid did u have to fuck with the oem plug at all or just rerouted the hid wires n bulb into the housing?

@MooreGravy Жыл бұрын

@@DiegoElCharrua I fished it out of the stock then ran it through the new one. Took me longer to figure it out than to do it. And the first one I did took a bit but the other took no time. The new housings had all the bulbs except that HID.

@ctamarack5229 11 ай бұрын

Did you ever get the wiring setup for the halo?

@joser8066 3 жыл бұрын

Does your truck its the xenon hid factory or halogen ?

@Blacked_OutMedia 3 жыл бұрын

I have the same ones on mine. They are absolutely not plug and play, I have to run the halos to the trucks wiring harness parking lights, and run the HID wire back through the aftermarket headlights, find screws that work cuz it didn’t come with em for a mount and put the HID light back in. Over 3 hours for 2 light. Also how do I turn on the LED Bar on the side of the head light towards the grille?

@alonzo5.040 3 жыл бұрын

Yeah unfortunately this cheaper Chinese brand isn’t plug and play , but the spyder brand should be , and if you wired everything properly it should turn on 🤔 I was even thinking running a separate wire for the halos

@Blacked_OutMedia 3 жыл бұрын

@@alonzo5.040 nope I got spyders all the halos are wired and there were no extra wires but the LED DRL doesn’t come on? Does it only come on in the day because my HALOS flash with my parking lights when I unlock it and my stock DRLS come on but not the LED strip ones? I’m gonna wait till tomorrow and see if they come on in the day.

@alonzo5.040 3 жыл бұрын

@@Blacked_OutMedia Id say check for any loose wiring, also check for any blown fuses 🤙🏼 best of luck bro , let me know if you happen to figure it out

@julissatorres1286 3 жыл бұрын

You didn’t turn the lights on I did this myself and you need to attach the halo lights , there’s a few that are connected to the red and black wires , just my opinion

@alonzo5.040 3 жыл бұрын

Yeah I forgot to add that in the video , and yeah for the halos I could have attached them to the low beam light/ or I was planning on just running a extra wire and switch through the fire wall

@cesarmolina608 2 жыл бұрын

Hey! I’m looking at these now. Did you splice them and connect them to the wires from the adapter coming from the new lights ? Also is it a posistive and negative or is that just the colors. Is the Manuel any help on where they go ?

@robertoosorio6758 2 жыл бұрын

En donde compraste tus luces

@ecgodsmack86 5 күн бұрын

How do you adjust them?

@skullofserpent5727 Жыл бұрын

Noice

@Jimmy_Cavallo 10 ай бұрын

💥 I was expecting to give you a 👍🏼 until I got to the end and found out that you didn’t show the entire job and just stuffed unconnected wires behind the light. And your link is for black lights. You said that you like things that look close to stock which those definitely do NOT

@nielmartin5627 2 жыл бұрын

Anyone know of any like these that don’t have the bubble/bug eye looking thing?

@carlosmoreno5070 2 жыл бұрын

Why did you remove the grill? Is isn't necessary

@alonzo5.040 2 жыл бұрын

Idk that’s just how I learned lol doesn’t take up to much time anyways

@alanclouner7021 3 жыл бұрын

Is the Cadillac Escalade EXT the same I’ve got an 05?

@alonzo5.040 3 жыл бұрын

Yeah it should be , links in the description so you can check if it fits your Escalade

@greenchryslerguy482 3 жыл бұрын

@@alonzo5.040 bro do u no how to put the caddy glow emblem

@Shareefhamida 4 ай бұрын

Yeah the bump is a lil weird , but either way get use out of it.

@guttaboizent 2 жыл бұрын

I THE SAME EXACT LIGHTS H0W DO I HO0K UP THE HiD's

@nichoelmills2014 3 жыл бұрын

I have an 05 Escalade and got the same spyder headlights for my truck and had to return them cause they had the wrong adapter on them and the low beams wouldn’t work, make sure you have the right adapter before ordering headlights.

@alonzo5.040 3 жыл бұрын

Huh that’s weird a lot of people get that problem, they literally claim it’s plug and play too

@proj3cT5150 Жыл бұрын

I saw a video where u didn't have to take off the whole grill..to take out the head light..

@Jason-xb3jh 5 ай бұрын

Wish you had turned the lights on…

@ronmac5069 Жыл бұрын

Did it work

@alonzo5.040 Жыл бұрын

Yeah everything worked perfectly, sorry it’s a old video and idk why I didn’t think about showing the after 😂🤦🏽‍♂️

@Militiaguerrillas 2 жыл бұрын

@4:05 LMFAO

@alonzo5.040 2 жыл бұрын

Went into a wormhole for a second lmao 😂

@imran4811 3 жыл бұрын

Yo turn on the damn lights b

@ryananthony477 2 жыл бұрын

You didnt even show them work.

@alonzo5.040 2 жыл бұрын

I knooow bro , really old video 😂

@anthonyolivares8809 2 жыл бұрын

No help thanks for trying

@muscleman4495 2 жыл бұрын

Learn how to follow simple directions, it’s not that’s hard otherwise take it to a mechanic 😂😂

@jajaokera5012 2 жыл бұрын

Bru, u didn't even hook up the halos. U left the wires exposed and no, they DO NOT hook up to a battery. They have to be linked into the existing wires. BAD VIDEO. 👎

@Justanotherhondaboy Жыл бұрын

How do u hook them up?