No problem man thanks for watching.

Very clear and direct to the point.

so it doesnt wiggle and its sturdy then? is it actually good

Thank you for watching and thank you for feedback on the video.

Umberto Gobbi thanks for watching man. And no problem try my best.

PureCaptures no problem thanks for watching.

Well thank you. I will be back very soon on here. 🤘🏻

E46 BMW DUDE thanks man and yeah I love it

Greg Wayne thank you and I'm pretty sure your right e46 has a different clip or doesn't use one at all I think.

I wonder Jake how is the shifter now that you've had it in almost a year? Presuming you still have the same car lol. I bought one because most of the reports on then said it was an improvement and at that price you can't lose. I just got it in the post but my car is getting the sub frame reinforcement plates put in (E46 M3 Thanks BMW LOL) which takes a few days. Can't wait to get it back.

Greg Wayne it's amazing man and hah I have a video on subframe plates and bushings as well I still have the car having some fuel issues right now just popped in a new mishimoto rad. So videos on that very soon as well. But I love the shifter have had zero issues.

Haha. I thought I'd watched ever subframe video on youtube but I keep forgetting that the E36 had problems too. I'm watching some more of your vids now. I'm getting the poly bushing put in too and I'm hoping it will really tighten up my rear for the drit-max factor LOL. Wow you put some sweet bushing in your trailing arms man. Those must have run a few bucks. But you drift that baby all the time. I'll be checking out the rest of your vids! Thanks for the great content Jake. Subbed!

Greg Wayne thinks man appreciate it and there will be plenty more videos soon

Dirty dirty girl

Daniel West I am still using the same lever car is running much better now I should be doing more videos soon just been busy with work and college classes but I shall be doing a wrap video soon of the BMW and more events and drifting off course 😉

amazing, i think, after the lever, to combine i thin putting a lightweight flywheel, would be good. im already sing in in ebay to look for the lever, as yours

Nikola Jurenić I'm pretty sure this one is specific for the e36 but I'm certain they make some for the e46 on eBay as well.

i need the e46 one :) When i'm looking at e46 shifters they all say they fit on e46 but only from 1999 to 2002 year models (the pre facelift ones). Googled for an hour and couldn't find any useful info so i thought you might know :) I would not like to buy one just to throw it in a trash.

Nikola Jurenić I'l see what I can find this weekend

Still shift smoothly maybe check your clip underneath?

I have installed one on my BMW e46 and I have to say, it is the most amazing experience I have ever had, it really is worth it, and I urge everyone to get one!! The only trouble I had was installing it at home , because the ring that you must clip on from the bottom was extremely hard to do alone and if you dont have the proper tools it will be extremely difficult to clip it on , so I had to take it to a garage to place the bottom ring/clip on it,

I used snap ring pliers to spread them apart and make sure your shifter is fully pressed down .

Niklasfrilander came with the short shifter thanks for watching

JonesCarSpotter that may work for you if you don't think you will need them you can go ahead and cut it and if you need it later you can always re wire it back.

Jake Sams okay thanks! It’s not like cutting that cable will do anything to stop my car from running normal?

JonesCarSpotter it shouldn't

Jake Sams okay great thanks 😁

All good like new no issues still amazing.

Mine is a 92 e36 325i I don't believe it fits a 91 usually the description when buying the part says what year make and model it fits.

Yeah I'm not 100% sure for the e46 as mine I'd an e36 sedan.

Eduardo Rosas my snap ring came with it.

MCatwar yeah I noticed some ppl have issues for me I have had it a long time not and have noticed no issues as of now but not too bad of price for a decent short throw

Jake Sams yeah I'm just gonna get a genuine BMW shifter off fcp euro in a bit, comes with new bushings, selector rod, etc

I have almost contemplated the condor speed shot shifter looks amazing

Jake Sams hmm I'll check it out

No it was back to stock location no issues.

Anthony Ayad I had to put alot of force down on my shifter for it to come down enough to put the snap ring back on

Jake Sams thanks for the reply I'm gonna get someone to hold it down while I put it on in the mean time I'll try to use alot of greese to pop it through

Anthony Ayad I used a mallet from the top to hit it a few times then it allowed me enough room

MarthyM yeah it took me awhile just trying to get that snap ring on lol

me to mate I dunno what to do now

I got bigger snap ring pliers and it went in ok (still took a bit of effort).

that's annoying fkn ebay

i wasted about 3 hours with that fucking ring, in my e39 530d , it a lil bit different and after 3 hours , just fucking gave up. i have to remove all the suport and maybe doin it outside then mont it all togheter.

Yes it is I absolutely love it and still use it.

Yes I used metal ramps which gave me enough room to work under it

I got one. No it doesn't. You have to squeeze the gap on the top with a clamp or whatever you got to make the gap smaller and then the shift knob will be held in place.

Still holding up strong 🤘🏻

I pulled mine down with pliers.

Snap ring pliers worked perfectly for me. The clip has 2 little holes on it.

Did you double check the bushing and or the collar of the short shifter is firmly Pushed down? I had similar issue when I first installed it.

I’ve sent you a dm on your Instagram page

I believe so

It won’t mess up anything?

Jan Rambousek I sure can I'll post the link in the video description now.

Thank you for watching and link for the shifter is in the description.

No nrg seats I have a video on them

Curly Fry M14 x 1.25

Jake Sams thanks

It should I added step by step to help everyone out the best I could. 🤘🏻

Shouldn't vibrate did you forget the white bushing or something? Seems like something might be loose.

@@JakeSams i put the snap ring

@@JakeSams but ifii pull it up it comes up a bit t isnt tight

@@boxlight2888 that's weird something seems to be missing or not fully seated.

Do you mean the clip for the bottom? yours should have a pin that slides through since the pin is from the shifter linkage system off the vehicle. If it didn't come with a clip I would message the seller and see if they can send you one.

Jake Sams I’m talking about the snap ring, when I removed my stock shifter, i didn’t have to remove any snap ring, only thing I had to remove was the clip that was attach to the bottom of the shifter that goes through the hole. But then when I was sitting in the driver seat, If I use force to pull the shifter up, it will pop out soo maybe I should go buy a snap right to put it on so it doesn’t pull out

@@stevenvang2650 yes you need that snap ring to hold the shifter down.

Jake Sams do you know what the size of the snap ring is?

Nvm bro. For some reason there isn’t even a spot for the snap ring..weird

No mine sits just like stock except shorter. Do you have the mono ball clip in correct location.

Jake Sams fast reply :o, is that the bottom snap ring? Or the clip that goes on the end? Or something else?

@@basedpony866 it's the bottom clip but make sure that mount is correctly tighten or isn't broken it's a metal mount where you push the short shifter in. Sometimes those crack which causes bad seating.

Jake Sams okay thank you, ill take a look at it asap

@@basedpony866 let me know what you find I'l do what I can to help 👍

No issues so far.

Ben·tastic I love the shifter has shifted great for me since day one and I recently made a shift knob for it.

I still love it. I don't get to drive it as much as I want from being so busy hoping to release some more videos before the end of the year and get back to posting regularly.

Sweet thanks for the info 👍

Must be a different year I had zero factory heat shielding under my boot area I squeezed around everything. Also always plan ahead before you do stuff to your own vehicle if you don't have another.