Installing An On-Board Air Compressor For My 3RD Generation Toyota Tacoma!!

Рет қаралды 101,148

5 жыл бұрын

It's time to finally be able to air out for the trails!! Today I install a built in air compressor from Tacoma beast on my 3rd generation Toyota Tacoma! This is an ARB brand with a single motor and hopefully this step by step video will help you install one and be ready for the trails! The hardest part was finding the spot to go through the firewall, but after that the wiring was fairly easy. The kit comes with detailed instructions as well. I figured the best spot to have this out of the way was underneath the hood as I will have easy access to it. Hope you guys enjoyed this video and the future adventures to come on the trails!
Air Compressor Mount:
• The MOST USEABLE MOD F...
brosfourrspeed.com/parts-%26-...
Installing An On-Board Air Compressor For My 3RD Generation Toyota Tacoma!!
Our Equipment:
- Sony Alpha a5100: amzn.to/2Pt5pCS
- GoPro Hero 8: amzn.to/2Qvg5Q2
- GoPro Hero 7: amzn.to/2NHSyKz
- DJI Mavic Pro: amzn.to/2HPjG6H
- Apple Imac 21in: amzn.to/2NIssa6
Music By: Joakim Karud
/ joakimkarud
Spring Light
www.epidemicsound.com
#toyotatacoma #toyotatrdoffroad #tacomabeast #aircompressor #offroading

Пікірлер: 136

@loveloveiloveuforever7247 Жыл бұрын

*Great air pump **MyBest.Tools** Faster than my old plug in pump and twice as handy without having to drag the cord around.And it works with my existing Ryobi drills battery.*

@BrosFOURRSpeed Жыл бұрын

Make sure what?

@venvea6845 4 жыл бұрын

David Spade drives a Tacoma?! Nice.

@gooffy89 3 жыл бұрын

Lmfao

@terrencehargrave2463 3 жыл бұрын

I saw your comment before the video loaded, BUSTED up when I saw

@tlo8646 Жыл бұрын

Got the compressor from Callahan Auto Parts

@mitchellwoolstenhulme6706 Жыл бұрын

SUPER HELPFUL VIDEO. After about 80x watches I got my compressor installed this week relatively pain-free! However finishing the wiring through the fire wall was not as easy as advertised, albeit I was working solo. Thanks for the detailed walkthrough and explanations. Cheers!

@BrosFOURRSpeed Жыл бұрын

Glad you found this video to be helpful! Wiring is always the trickiest!

@jlrecoder1 3 жыл бұрын

Great video guys! Ordered the fuse adapter and should be installing next week

@BrosFOURRSpeed 3 жыл бұрын

Nice! I use it a good bit, one of the best mods I've done!

@rickyloganjr.2362 5 жыл бұрын

You two are really something as I'm truly amazed by the level of knowledge you both have about cars. As I watched this video I was captivated by the way you two worked on this new mod then knowing what's what. Excellent 👌.

@BrosFOURRSpeed 5 жыл бұрын

Thanks! It was our first time doing a mod like this too! Went pretty smooth and absolutely love the outcome

@MsRotorwings 3 жыл бұрын

Thanks for the detailed installation. Subscribed. Except for the lighting it was a perfect video.

@BrosFOURRSpeed 3 жыл бұрын

Thanks for the sub! We have bought new cameras since then and have an led light we use now in low light situations!

@davepeace4037 4 жыл бұрын

Good video. Very detailed with what wire ends go where and what each of them do.

@BrosFOURRSpeed 4 жыл бұрын

Glad it was helpful!

@kevinnaira3816 5 жыл бұрын

What amp fuses you put into each adapter and what side is load/source when you plug it into the fuse panel?

@horaciohdez7491 5 жыл бұрын

to the fuse adapter you put fuses, or only those that were placed in the fuse box?

@parttimedirtbag 3 жыл бұрын

Our install was a bit different since we drive a Frontier, but your info about the fuse adaptors was super helpful since we couldn't find any info on how to do this on a Frontier. Had to do a little figuring out ourselves but this was an incredibly helpful start.

@BrosFOURRSpeed 3 жыл бұрын

Awesome, glad it was helpful! I've used this quiet a few times, I love having it!!

@parttimedirtbag 3 жыл бұрын

@@BrosFOURRSpeed we’ve had ours installed about a month and I use it at least once a week for the days I’m driving in sand for work it’s been a game changer

@BrosFOURRSpeed 3 жыл бұрын

@@parttimedirtbag Very cool! It's definitely a must for leaving the pavement!

@yotaGuy-hp3qs 5 жыл бұрын

Great video that looks awesome can’t wait to see u do more off roading

@BrosFOURRSpeed 5 жыл бұрын

Thanks!

@PsyChAoS_ 3 жыл бұрын

About bloody time there is a video that actually shows the wiring good work

@BrosFOURRSpeed 3 жыл бұрын

Glad you found it helpful! What are you putting this on, a tacoma!?

@PsyChAoS_ 3 жыл бұрын

A holden rodeo. Im in australia. I wish i had a tacoma tho haha

@BrosFOURRSpeed 3 жыл бұрын

@@PsyChAoS_ Oh cool! Do they have the Helix there!?

@PsyChAoS_ 3 жыл бұрын

@@BrosFOURRSpeed hell yea they do. There awesome

@JBB175 5 жыл бұрын

Can the brightness of the switch be controlled like all the other instrument and switch lights?

@horaciohdez7491 5 жыл бұрын

What measure is the nut that you put where you hold the base?

@30-06 5 жыл бұрын

Thanks for this great video! The reason I’m subscribing your channel!

@BrosFOURRSpeed 5 жыл бұрын

Thanks for the support!

@musafir1930 5 жыл бұрын

Hi, thanks for the great informative video. wondering what particular fuse adopter you used as i got one from Auto zone and realized the fuse from truck don't match with the adapter.

@edgardorodriguez1314 3 жыл бұрын

I just came across the same issue. Where did you end up finding one? If you did.

@lukestoyz 5 жыл бұрын

This is the exact pump I’m going to purchase. It’s good to know what it takes to install before I purchase it. Good video

@BrosFOURRSpeed 5 жыл бұрын

Glad to help! Tomorrows video shows it in action. Super happy with it!

@bradgt5130 5 жыл бұрын

lukestoyz don’t have this one, but I have the twin model. Love it, if you don’t have the ability to make your own mount. Sleep off-road makes a Underhood mount, and expedition essentials makes a bed box mount. So you got options. Made a small video of my set up.

@oceanious 5 жыл бұрын

looks, great friends

@BrosFOURRSpeed 5 жыл бұрын

Thanks!

@peteg7446 5 жыл бұрын

Nice clean install 🖒. Looking at the same ARB for my ZR2.

@BrosFOURRSpeed 5 жыл бұрын

Peter Garcia Thanks! Tuesday’s video will show the completed project in action. Highly recommend it!

@chemuxx1235 4 жыл бұрын

Where did you buy the fuse adapters?

@arielrosado941 3 жыл бұрын

I love your videos i cant wait to upgrade my Tacoma i have a question adding all those led lights and the compressor do yo have to upgrade the battery

@BrosFOURRSpeed 3 жыл бұрын

Glad you like the vids! I havent had an issue with my battery. I always have the engine running when I use the compressor tho

@BrianSmith-ws7gl 5 жыл бұрын

Did you just add the fuse tap in there with just the fuse from the fuse box or did you have another fuse added into the other slot on the tap? I can’t get my compressor to come on with the switch on my second gen? Thanks

@dxl1key 4 жыл бұрын

Fuse has to be the longer one.. but with that one, my compressor won’t turn on either.. did you figure it out?

@esanchez5994 4 жыл бұрын

Thanks for the install video. Would you happen to have a link for the fuse connector?

@BrosFOURRSpeed 3 жыл бұрын

I got them from my local auto parts store! Most places carry them!

@troytdesigns1 3 жыл бұрын

How do you like that compressor? I'm thinking about getting it for my outback. I'm running 245/65R 17 Falken Wildpeak A/T Trail tire

@BrosFOURRSpeed 3 жыл бұрын

I love it! I use it for not only going off the pavement to air back up, but to check tires during cold weather and I've had to use it for other peoples cars too, it's been great having it mobile!

@17874 3 жыл бұрын

What size nuts did you use to mount it to the three pre existing bolts on the passenger side fender? Where did you get them?

@BrosFOURRSpeed 3 жыл бұрын

Well I had a drawer full of them and picked out ones that fit properly. I don't remember the size, so sorry for that! I'm sure you could test fit some at a local auto parts store possibly.

@jlrecoder1 3 жыл бұрын

Where did you order the fuse adapters from? I have some but not sure if they are the same?

@BrosFOURRSpeed 3 жыл бұрын

You can get those from the local auto parts store! Just make sure they fit the fuse you are using. Some fuses are longer than others.

@raphaelclarkchristianraran7764 3 жыл бұрын

Hello dude! I may be a bit late here but do u mind telling me the purpose of that white plastic thing u are pointing at 2:48? I also found those on my arb air comp but i do not know the use of it... would u mind.. Thanks!

@BrosFOURRSpeed 3 жыл бұрын

Mine are still blank! I think you can add something else to it, but I'm not exactly sure what you would add there. It could be wiring for air lockers or something like that purpose!

@bradgt5130 5 жыл бұрын

Love yalls video quality, still trying to learn more about editing and better cameras. Like that you was able to make your own mount, I opted for the slee off-road bracket, love it, it actually goes in the same spot you used. Not sure if anyone mentioned, a switch underhood. Good idea

@BrosFOURRSpeed 5 жыл бұрын

I never thought to put the switch in the engine bay, may have to at some point.

@minnesotaco8880 5 жыл бұрын

Should have put switch under hood u have to hook up hose any way n then u don’t lose room in truck for light switches where they should be

@BrosFOURRSpeed 5 жыл бұрын

Thats actually not a bad idea. I didn't even think about that

@Richardaaguilar43 2 жыл бұрын

Would this be small enough to mount in the storage box under the back seat?

@BrosFOURRSpeed 2 жыл бұрын

Definitely behind the seats, but it might be a bit bulky underneath the seat. I have seen people put them in the storage compartment in the bed, but I think a good bit of trimming is required for that!

@trialnterror Жыл бұрын

I have this compressor, it’s hooked up to my arb air locker in the rear. Am I able to hook up a air compressor for filling up my tires? If so how or where would I find the info?

@BrosFOURRSpeed Жыл бұрын

How is the compressor attached for the locker? Is it a normal hose? If so, you could disconnect it, put it a hose like what I showed and go between the two.

@atch9790 5 жыл бұрын

Nice work

@BrosFOURRSpeed 5 жыл бұрын

THanks!

@SynteconlineAuSupplements 11 ай бұрын

perfect well priced

@BrosFOURRSpeed 11 ай бұрын

It was a great tool to have!

@mojamz593 5 жыл бұрын

Are you using all the wires in the isolation switch loom?

@BrosFOURRSpeed 5 жыл бұрын

Yeah, it's just the three together on that switch.

@mdoneg 4 жыл бұрын

I don't understand the fuse adapter part. Where did you get those?

@BrosFOURRSpeed 3 жыл бұрын

From my local auto parts store, they are very common, just make sure they fit the length of the fuse being used.

@christopherrivas4403 5 жыл бұрын

It’s David spade!

@Bradley2001 5 жыл бұрын

I’m gonna do the same thing to my 2nd gen taco, but I’m gonna put it in the storage compartment in the bed. The one opposite the bed outlet. Will it fit in there?

@BrosFOURRSpeed 5 жыл бұрын

It would, it took up the whole compartment though and I didn't really want to drill into the plastic or anything, but it could work there.

@Bradley2001 5 жыл бұрын

Bros FOURR Speed thanks

@lordwrath9621 4 жыл бұрын

Tacomabeast has some outrageous pricing.

@deel.4982 4 жыл бұрын

I’m facing the same problem like others: the ARB won’t turn on and system shows “pre-collision system malfunction”. Followed the video instruction, please advise.

@BrosFOURRSpeed 4 жыл бұрын

You are seeing "pre-collision system malfunction" on the truck dash screen? If that's what you mean, I don't think that would be affected by the compressor.

@marksetters931 4 жыл бұрын

I followed the same and having the same warnings.

@Artofspeedd 5 жыл бұрын

💣

@dwaynepreller2372 3 жыл бұрын

Do u have been lock wheels to air down

@BrosFOURRSpeed 3 жыл бұрын

I don't. But I've never had an issue and I've gone down to around 15psi

@andrewcooley8627 3 жыл бұрын

What connector did you order to hook hose too

@BrosFOURRSpeed 3 жыл бұрын

Everything came in the kit! Can you time stamp what piece you are talking about just to be sure?

@chasebasile8767 3 жыл бұрын

Can I bypass tapping into the fuse box?

@BrosFOURRSpeed 3 жыл бұрын

I haven't watched this in awhile lol, but I don't think I tapped into the fuse box at all, just into the battery.

@alfredopacheco7581 3 жыл бұрын

Great info!! Could you send a link for the fuse adapters?

@BrosFOURRSpeed 3 жыл бұрын

I got those from my local auto parts store! Advance auto or auto zone should have those!

@alfredopacheco7581 3 жыл бұрын

@@BrosFOURRSpeed Thx.

@codyholder8461 5 жыл бұрын

Dude looks like David Spades

@AndrewKNI 5 жыл бұрын

Great work guys. Mega interesting :-)

@BrosFOURRSpeed 5 жыл бұрын

Thanks! Tuesday's video shows the final product in action!

@tysoncarl8413 4 жыл бұрын

What fuses did you use?

@BrosFOURRSpeed 4 жыл бұрын

I don't think I used any, just connected it to the battery.

@myjlwranglerproject4125 4 жыл бұрын

Why not just mount the Switch by the compressor on the bracket. You have to open the hood and plug in hose there anyway.

@BrosFOURRSpeed 3 жыл бұрын

While that's a good spot for it too, you also have to go inside to turn the truck on as well to use it too. Both spots could work.

@stacydornan9765 5 жыл бұрын

Good job young fella

@BrosFOURRSpeed 5 жыл бұрын

Thanks!

@joshuamiller9648 4 жыл бұрын

Ok so the solution for me was adding two fuses to the fuse adapter. I couldn’t get my switch to turn on either and was not finding a solution in the comments. It hit me that there were two fuse ports on the fuse adapter so I tried putting two fuses in and then I got power to the switch and compressor.

@edgardorodriguez1314 3 жыл бұрын

Yeah I can’t get mine to turn on. The light illuminates on the switch but the compressor is off. I wonder if I need another fuse as well.

@edgarandreasyan521 2 жыл бұрын

Anyone know where I can buy a bracket ?

@BrosFOURRSpeed 2 жыл бұрын

I made one! It was pretty cheap and not that hard to do! kzfaq.info/get/bejne/feCHrZt6vJqVf6s.html

@MrDizzank 2 жыл бұрын

Where does the little black wire go?

@BrosFOURRSpeed 2 жыл бұрын

Can you time stamp where you are talking about!?

@yoboo6167 4 жыл бұрын

Thanks for sharing, should make the install go a little smoother tomorrow. Don't worry though, if something goes wrong, I'll be sure to blame you in the comments! (Sarcasm/joke) lol!

@BrosFOURRSpeed 4 жыл бұрын

Hahah, hopefully it goes well! It wasn't too bad to do.

@DoriJonah Жыл бұрын

you look like the cool version of david spade

@BrosFOURRSpeed Жыл бұрын

Lol that’s cool to know!

@edgardorodriguez1314 3 жыл бұрын

How’s it holding up?

@BrosFOURRSpeed 3 жыл бұрын

Never had an issue and I've used it several times off road! Love it!

@jasonmolihan61 Жыл бұрын

Any regret not buying the twin, after 3 years?

@BrosFOURRSpeed Жыл бұрын

No! It’s worked great for what I’ve done! I did 8 tires back to back once and it was fine! I don’t use a ton so maybe if it was every weekend, but I don’t see upgrading at all.

@jasonmolihan61 Жыл бұрын

@@BrosFOURRSpeed I want to be able to air up, and also use it for a air horn. Deep down I know the single would be fine with a gallon tank, but I’ll probably end up buying the twin.

@BrosFOURRSpeed Жыл бұрын

@@jasonmolihan61 If that makes you feel more comfortable!

@waynasfamilyadventures147 3 жыл бұрын

That's the smallest one ARB do for inflating tyres. The smaller one you refer to is for air lockers only

@BrosFOURRSpeed 3 жыл бұрын

Well this one works fine for inflating tires on my truck

@BrosFOURRSpeed 3 жыл бұрын

Not exactly sure what you mean. This compressor I installed in this video is what I use to inflate the tires, it works well!

@rlmast 2 жыл бұрын

Dude I swear you are like David Spades son..

@BrosFOURRSpeed 2 жыл бұрын

I've had that comment multiple times! I'm not sure if that's good or not lol

@rlmast 2 жыл бұрын

@@BrosFOURRSpeedso um yea if you can just spit in this cup so I can go get a DNA test done.. That would be great lol.

@BrosFOURRSpeed 2 жыл бұрын

@@rlmast Lol, I’m not related in anyway!

@terry5008 3 жыл бұрын

Since you have to pop the hood to use the air compressor and you're only using it for tire inflation, why do you need a switch on the dash? Why not just have a mounted weatherproof switch on the firewall next to the compressor? Seems like a lot of much trouble to go through for no gain.

@BrosFOURRSpeed 3 жыл бұрын

Thats a very good point in all honesty! No clue lol