Installing and Reviewing The Lasfit Auxiliary Switch Panel Bank Kit.

Рет қаралды 18,038

2 жыл бұрын

We Install and give our initial impressions of the Lasfit Auxiliary Switch Panel Bank Kit for 2018 to present Jeep JL and JT models. There are options for locker switches as well. However since we have a Rubicon model, we did not need those.
Lasfit did provide the Aux Switches to us at a discount to test and review. So far we have been running them since the filming of this video and we are very pleased with their performance.
If you would like to purchase them with a discount as well, Follow these links:
Jeep JL: lddy.no/19gyd
Jeep JT: lddy.no/19gyc
This Channel is proudly supported by:
Lasfit: WWW.LASFIT.COM
Olympus Blades
Down for Adventure!
As Always, if you enjoy what you see, it would mean a ton if you would Share, Like and Subscribe!
2021 Jeep Gladiator Rubicon
Go Rhino XRS rack: • Go Rhino Overland Extr...
ARB Classic Stubby Bumper: • Jeep Gladiator JT Fron...
CVT Mt. Denali Roof Top Tent.
WeBoost Drive RV
Lasfit Auxiliary Switch Panel Bank
Check out our Overland Build PlayList: kzfaq.info/sun/PL_...)
Canon EOS 60D
Canon 18-135mm Kit Lens
DEITY D4 Micro Microphone
DIGIPOWER Multi-Color LED light
GoPro Hero 9 Black
DJI Mini 2 Drone
Come find us on Instagram! @overlanderoos
E-mail: overlanderoos@gmail.com

Пікірлер: 50

@spencerkunz Жыл бұрын

This is the most detailed video regarding this product. Thank you!

@Overlanderoos Жыл бұрын

So pumped you liked it!

@nofollowpigs Жыл бұрын

Just installed mine. Used this as a step by step guide. Super easy. Thanks.

@Overlanderoos Жыл бұрын

So pumped this helped you! Hope you love them as much as we love ours!

@user-xq6wi1iv2q 6 ай бұрын

You did an awesome detailed job of the install process. Thanks a ton!!

@Overlanderoos 6 ай бұрын

You are super welcome! I'm pumped it helped! Hope you enjoy it!

@mjo326 5 ай бұрын

I agree with your assessment of the firewall plug. Great video!

@Overlanderoos 5 ай бұрын

Thank you so much!

@Planejeep0923 3 ай бұрын

Very thorough video. Thank you for sharing.

@Overlanderoos 3 ай бұрын

So pumped it helped!!!

@Frostytravels Жыл бұрын

Great channel. I live in Ocala and am getting a Gladiator next week. Looking forward to hitting the forest. Gave you a sub man, great video.

@Overlanderoos Жыл бұрын

Thank you so much! We will have to hit the trails some day! you are going to love the Gladiator! Let me know if you need help with anything!

@Frostytravels Жыл бұрын

@@Overlanderoos Hey thanks a lot. Really like your content. I will reach out when we get the Gladiator in. Thanks again.

@dkccurf158 4 ай бұрын

Very well done video. I have a black, flat Lasfit bracket and a 10mm nut left after I installed. Are they just extras? Also, the wiring harness that includes the 4 hot wires under the hood.....that's a long harness, should it be run across to the driver's side with the harness that goes in the cabin? What do you do with all the length of harness (prior to hooking up AUX items), just wad it up next to the battery. Thanks a bunch. I also used your video as a step by step and it was so useful.

@Johnny-tt8zc 4 ай бұрын

I just got these. Haven’t installed them yet. Question. Do they have last position memory?

@wbpoarch Жыл бұрын

Great video, thanks! One question, how do you know what button will control which accessory you connect to Jeep? Like light bar vs fog lights?

@Overlanderoos Жыл бұрын

Great question! There are 4 individually labeled power leads that come out of the unit, so you can decide upon install which one will be which. If you hook up your light bar to power lead #1 then switch 1 will control it, etc etc!

@jimregione6992 3 ай бұрын

When you installed the cigarette lighter harness did you end up with an extra plug that wasn't connected?

@edramsey142 4 ай бұрын

What about the 3.0 diesel's? The power feeds are to short to reach the battery terminals.

@rolliehunt5173 7 ай бұрын

Maybe I missed it, but I didnt see the way you ran the wiring harness from the driver's side to the switches.

@wilpharaoh3276 Жыл бұрын

Thanks for the video. What sealant did you end up using to seal that rubber gasket into the firewall?

@Overlanderoos Жыл бұрын

Believe it or not, I didn't. I still intend too and will probably use black RTV gasket maker. I've been in water over the hood and nothing leaked!

@stratdx Жыл бұрын

I might have zoned out there. Where do you attach the wires from the accessory (pod lights, etc). I’m assuming into the sealed box somehow?

@Overlanderoos Жыл бұрын

Haha, the sealed box has power wires running that are capped off waiting for you to hook up your electronics to them! it couldnt get any easier!

@vanquish_engineering Жыл бұрын

Where in Jax? I'm thinking of adding this to my new 23 JTR.

@Overlanderoos Жыл бұрын

Do it! you will love it! I am pretty centrally located!

@andrewfischer3971 21 күн бұрын

Great video. Does the wire harness that goes into the inside of the jeep give you wires that are a source for constant 12V power? Ie, can I hook up accessories to it that need a "constant on" option? Would be great if I could hook up my wolfbox mirror camera to it so it can monitor the Jeep when off and parked. Thanks.

@Overlanderoos 21 күн бұрын

@@andrewfischer3971 thank you so much!! Super glad you liked it! No, however I have found that if you leave the button on to whatever you are powering , it will stay energized after the vehicle is off (hopefully it's not just mine) maybe someone else in the comments can test there's too!

@Destinationtonowhere 20 күн бұрын

@@Overlanderoos - so the interior cables would be a good source for a two way radio then?

@Overlanderoos 20 күн бұрын

@Destinationtonowhere should be!

@RELENTLES007 9 ай бұрын

Will this work with KC light bars?

@Overlanderoos 9 ай бұрын

I don't see why it wouldn't!

@user-sp7vu6qx1x Жыл бұрын

I followed this video (which is the best of the bunch on YT) but cant get the buttons to respond. The panel is backlit and getting power I believe but no ability to turn on or off. Tried changing the fuse but to no avail. Lasfit has yet to reach back out to me. Im at a loss.

@Overlanderoos Жыл бұрын

Oh man! Thanks for the kind words! Do the amber lights on on the buttons light up? They may have sent you a faulty unit unfortunately. Their customer service is super good! I'm sure they will make it right!

@user-sp7vu6qx1x Жыл бұрын

@@Overlanderoos I just figured it out. The cigar lighter fuse was technically “empty” so to speak. I had used that slot for my oracle LED Bi Light headlights. Fortunately it had a slot for another fuse that once plugged in, turned everything on! Im soooo happy lol

@Overlanderoos Жыл бұрын

@@user-sp7vu6qx1x nice Good Catch!

@jawsxx8683 6 ай бұрын

I'm pissed. My jeep is missing that plug. Thank God I got this kit to replace it.

@Overlanderoos 6 ай бұрын

Glad it worked out for yah! Hope the video was helpful!

@jawsxx8683 6 ай бұрын

@@Overlanderoos It was. I just finished. It took me a long time because I was very particular about a lot of things. Overall, I'm happy and your video helped explain some things the manual didn't.

@Overlanderoos 6 ай бұрын

Awesome! Never a bad thing to take your time and do it right!

@jayhernandez6812 Жыл бұрын

This switch only turns on when the engine is on, correct?

@Overlanderoos Жыл бұрын

Yes or when you have power applied to the Acc portion. However if you leave it on and turn the vehicle off I have found that the switch will stay on, so be mindful of that!

@jayhernandez6812 Жыл бұрын

So meaning you need a canvas cable so that only turns on when ACC or engine on?

@Overlanderoos Жыл бұрын

Not sure I understand the canvas cable? The switch will only work if Accessories power or the engines running.

@jayhernandez6812 Жыл бұрын

ok, why the red switch has cabus cable?

@mikeblaszczak5346 Жыл бұрын

@@Overlanderoos I think Jay meant "CANbus cable". The Mopar AUX switches are settable -- optionally turn on after the Jeep is restarted if the switch was on when shut off, for example. Or, optionally work when OFF or not. Are the Lasfit switches programmable in this way?