Love how the truck is coming along. That's the problem of being the first kid on the block with a new toy, no aftermarket support yet lol I am 100% jelly tho

New wheels and tires look FANTASTIC!!! Good luck and safe driving.

Very shocked to see gold but it looks AWESOME! Also props to GM for making the spare fit. If it fits it’s cause they made it fit.

Looks sweet! Love the channel!!

It’s goin to be 5-6 months until I get my ZR2 but I’ll be watching all your videos on upgrades. Thanks!

There's a couple of brands of wheel / fender liners you can get for the bed. I took out my carpeted liners on my 2018 Z71 and put in rugged liners. Perfect fit and way easier to wash ! More coverage than factory ones...

Love the simplicity of this build, thus far

Sweet Ride! Love the updated dash!

On my 2021 LTZ with MT AT's (35's) I added the ready lift and leveling kit to mine. Total 4 inches. Had to cut off part of the rear plastic mud caps.

Love the new truck. I really like those wheels. Simple and clean.

Looks awesome... too awesome I would be so sad when I chunked them up off-roading.

Always loved Bronze wheels but i bought black wheels on my white trail boss because i was scared of the look...but now i can have an idea on ur Zr2 and i love it! Keep the contents coming 🤙

Looking good man!

Awesome.Already going hard with the Bowtie 💪🏻. Can't wait for the exhaust.

I’ve got 295/70/18 on my 21 trail boss with -6 offset. I did lift the front an extra 1.75”. Now I only rub against the mud flap a little close to full lock. No issues otherwise.

I’d be curious to see how much (if any) improvement you would see from the front rubbing if you removed those removable front bumper end caps.

Looks awesome! I’m getting mine tomorrow, also white! Do you know what is the original rim width measure? I’m planning to install 1” front leveling spacers and I was thinking cooper stt pro 305/70r18 or yokohama geolandar 295/70r18. Cheers from Cabo!

They look sweet!!

I have this exact same size and offset only running toyo RT on my trailboss, had to remove the mud flap bracket and trim the mud flap a bit and I have zero rub full lock. I did manipulate the liners a bit.

They do look great.

Those wheels look great 👍.

I just put 295/70 R18 (34.5") on my 2021 GMC Sierra AT4 (stock suspension) with Fuel Off Road Vectors with a "1" offset (0.9" poke out). I had rubbing and did some trimming and cutting. No issues now. Bounced it pretty hard...no rubbing. Did a video on my channel if you wanna see the truck and work.

Excited on the ZR2 6.2 build. I'm sure your channel is gonna blow up since you'll probably the earliest in modding this beauty. Don't forget about us 🥺

GM should have used the same strategy as they did on the Colorado, plus some. It doesn't have to be supercharged, but dang at least make it more unique and aggressive from all angles. Wider, more travel, 35in tires, maybe even a diesel engine option. Either way, nice rig.👍

They look awesome on there ....looks like a little trimming is necessary to avoid unforeseen road issues because they are to close to just forget about ...it will bite you in the ass when you least expect it ....next up ....exhaust and cold air intake ???

I think this is my new Dream truck over the Diesel ZR2 Colorado, just because of the interior

Does it not have an inner fender liner in the rear? Is that something that is available? Looks great Matt.

Did you do any measurements at the top of the wheel well, front and rear before adding the wheels and tires?

The Silverado zr2 should have come with 35 tires that being said, the looks awesome.

Thanks for being the Guinea. 👍😆

Truck looks tough bro! I'm installing the same 35s next week. How they holding up, any complaints/regrets?

You and your buddy are lookin swole. nice job.

ReadyLift has a really good lift kit for the Trail Boss that will work for the ZR2 and it'll give you the correct geometry on your ball joint it comes with the upper control arms and they are pretty beefy

Nice video ❤️👍

👍 Looks sweet. How much for the stock wheels and where are you located? TIA

Does the bronze colored wheels match the stitching? Or anything. The Truck is dope with those wheels and tire. Can’t wait to see the rest of the upcoming Mods . Thank you young sir.

I can't believe GM is still using the lamest spare tire method ever

Nice wheels

You can take off those end caps on the bumper so it doesn’t rub

Just a hair over 34s... Still look great!

Thank you looks fantastic. Wheels part number?

I'm so jealous of that truck haha

What was the backspacing on the wheels?

Crispy!!

Doesn’t the zr2 come with 2 inch lift?

I ordered a ZR2 mine supposed to come in July but we will see. I think I’m going to run 33s until the warranty is up then send it to pax power to get it hopefully maybe on 37s but at least 35s and the supercharger they add to there jackal trucks which are just trail bosses on steroids.

What type of spacers for rear

Did you need wheel spacers to gap the brake calipers?

It's so lame that GM didn't do factory 35's. That's going to rub badly off-road.

They look good. I could not stand the rubbing though; however, it is not my truck.

ALso I'll be curious if any company will make a suspension lift for the ZR2 because that's what you paid the money for is those fancy shocks you'll have to remove.

That was the first thing I did is to remove the spare tire and relocate it to the bed of the truck it looks much cooler 😎 to see the back end of the truck Instead of some bulky tire Sticking down looks like shit Plus if the pulley or cable gets rusted up how often do you change your tire..lol Now when you need to change your tire you can't will be cut tire out from underneath the truck

Love watching all of this. My dude those aren’t 35’s. Those are heavy 33’s. Maybe 33.8” of a tire. GM even states true 35’s which are like a 325/70/17-18 not going to clear due to front bumper. Nice 33’s though no joke. Measure your tires with a measuring tape from the ground to the top of tread. Keep going! Love the build.

Look a lot like the wheels you have on your Colorado.

With a level and the subpar AEV trim kit you should be good!

The only stock trucks that will fit 35s: Gladiator, TRX, & Raptor. I’ve seen Tundras & a F-150 Tremor on 35s with no lift, but that’s street use only … no room for articulation.

you should have gone 255/85r17 mt baja boss. 10x34.8 def the way to go.

Why didn't you just go for 35" Goodyear Wranglers from the TRX?

So no more Colorado?

So on the Chevy trail boss you can comfortably fit 37" tires with UCA, coilovers, and both mud flap/crash bar delete. I'm sure on the ZR2 with the additional clearance 37's should not be an issue

Can we verify if the ZR2 has front wheel crash bars?

Don't know what you do for a living but you must make great money if you can buy a zr2 silverado and the. Spend money on it good luck with it

Can't you level a zr2?

you can remove the front part but the back you may have to shave off a bit.

I feel like The ZR2 should be supercharged I mean it competes with the ram trx.

Has anyone supercharged one of these yet?

GM did not drop the ball. They built a truck to fill a niche! You bought it! Your big problem here is the offset and how it pushes the tire out which causes a wider, longer arc to clear everything. If they supercharged it and made it a direct competitor of the TRX and Raptor, they shove it into a market that will be saturated if research hasn’t already shown it to be saturated. Yes they can’t keep up with orders currently, but that has so much more to do with the chip shortage and production capabilities vs demand. Before things hit the fan, back in 2019 I bought my last Raptor for $10,000 under the MSRP! The trucks were not selling out in the year they were produced for and the TRX didn’t exist. Fords production was exceeding the market on their own as a competitor and market of one truck!! When things settle, there could be issues for the TRX and the Raptor, GM has a massive market analysis team and I’m sure they did this truck for the simple fact it is currently in a niche where they are the only full size trucks (ZR2 and AT4X) with both front and rear lockers. A niche of one!! 33s as a stock tire are decent sized tires. I have never watched your channel so I don’t know if you take the truck out to off-road scenarios that actually push the limits. If not, then the 35s are all for appearance anyways. I have a F150 Tremor and will use it to 75 or 80% if it’s capabilities which aren’t quite as high as the Silverado ZR2. I have no need to go to a larger tire personally. I have built some extreme trucks, but now that my back is totalled (so to speak) I have no need and have built a couple of nice 2wd trucks and several cars. After selling off 6 of them recently I’m now down to an even dozen. They all get driven quite regularly!!

1 inch Level might solve it

How do you afford this? 😮

Love the bronze wheels and white truck. Good choice. If you’re going to do anything with the exhaust, Black Widow makes some amazing mufflers. Just saying 😊

Sorry matt put back on the black rims

Thought this was interesting. It’s last years Trailboss but a 35x11.5 seemed to fit and not rub. See this guys video. Wonder if it’s same wheel well, I assume so. kzfaq.info/get/bejne/d7ShdpqUvt7HknU.html

GM didn't drop the ball, based on your wants (wide body, long travel) you were looking for a baja style truck such as the raptor or trx but instead got the Trail truck that gm offers. I call it more of a missed opportunity on GM's part. They could've jumped on the baja bandwagon. After all, they already have a very capable colorado zr2. Maybe next time for GM (if it's not too late)

Gm should be embarrassed that it can’t fit 35’s. It should be a option atleast.

You missed a spot!

This is a rap video on wheels

Stop comparing it to the Raptor and TRX chief. Widebody limits where you can go off road - ZR2 does everything/ has capability.

Matt, GM is sending you a message and you aint getting it. So let me spell it out for you. ZR2 & AT4X are not competing against the Ram TRX and Ford Raptor. ZR2 is competing against the Ram Rebel and Ford Tremor. A 35 inch wheel adds an inch of ground clearance that 99.999999999999999999999999999999% GM buyers dont need. 35 inch wheels reduces gas milage when gas is $5 a gallon. Increases stopping distance and reduces acceleration. Everyone that is buying the ZR2 and AT4X Knows damn well you cant put 35's on them.

Chevrolet dropped the ball by a development program spanning two actual desert racing seasons in a real racing series. Yeah.

P.S.Chevy is cheap all that money I do not see wheel well protectors. Make sure you get them

Sorry, but I liked it better with the original wheels and tires.

Wide body is not good for off-roaders.

35s too smol.

Can’t believed you ruined my truck with those ugly rims. Lawd

35s aren’t massive 37s aren’t even massive anymore

Are u really using a brush on that paint ? Come on now brother ur a gear head too

The truck aint worth the price.... period..

the rap crap sucks....