Installing Brother Toners

No video

Installing Brother Toners

Рет қаралды 707,159

Күн бұрын

NOTE: Not all toners for Brother laser jet printers will follow the same installation instructions as shown in the video, however these steps fit the majority of models.
Replacing Brother toners can sometimes cause confusion as usually in order to replace the toner you must also remove the drum cartridge from the printer first, then release the toner from the drum. A lot of people are unaware that the toner and drum are separate units and will inadvertently dispose of the drum as well when they only need to replace the toner cartridge (on average a drum cartridge has a lifespan 10 times longer than that of a toner cartridge).
Although of varying shapes and sizes, the majority of Brother follow the same steps, although the locking mechanism for the drum varies between the different printers, some simply slot into place and don't need to be clipped in.
The model used in this demonstration is a Brother TN1070 toner cartridge for the HL-1110 mono laser printer.
For all you ink & toner needs, please head to our website www.inkspot.net.au. Inkspot, the home of ink & toner.

Пікірлер: 76

@EdgarJackson-sr4sv Жыл бұрын

The printer was a bit complicated to hook up kzfaq.infoUgkxciSwynMJ7PnUvvx11rewiu-yFBkZTl53 but it does the job very efficiently. I like the ink wells versus the ink cartages that cost an arm and a leg. It prints quickly and the quality is excellent. It shuts off when not in use, so you have to remember to turn it on. Overall, it exceeds my expectations. I'll update my review in a couple of months.

@HuwSayer 3 жыл бұрын

So much clearer than the illustrations on the official Brother site - thank you.

@1973Washu 6 жыл бұрын

Thank you, this was easier to understand than the quick start guide's instructions.

@brendanraja5369 6 жыл бұрын

Thank you it is a simple process but very frustrating if you don't know for the first time....

@TheMcgrady21 6 жыл бұрын

What about showing how you actually take it out?

@mandyajel 6 жыл бұрын

Thank you! i recently brought a couple of toner replacements for my brother HL-11 series but i was scratching my head on what to do as i hadn't changed the toner in so long i just couldn't remember what to do. I've done it now, so thank you for uploading this video its helped a lot.

@changtan389 2 жыл бұрын

Wow. Everything is more clear now than the trash instructions I got with my printer from Sam’s Club

@jorgheeger2752 4 жыл бұрын

Very good shown. Thank you!

@aliceanonyme9347 Жыл бұрын

thank you so much !!!!

@BB_arbie 3 жыл бұрын

You're a life saver thank you.

@mikeandlouisegrant1306 3 жыл бұрын

Thanks for this video. Far more helpful.

@melisam-j4074 7 жыл бұрын

Thank you this is clear and easy to follow. Nice one! XM

@andrewduanebarr4737 2 жыл бұрын

Thanks

@johnsmessenger 4 жыл бұрын

so daft- doesn't start with taking it out!

@siras2 4 жыл бұрын

Agree, why show the process with the job half done?

@Lauriah7 6 ай бұрын

I like this printer. Does the paper tray close while the paper is still in or do you first have to remove the paper in order to close it?

@AidasRusa 3 жыл бұрын

Thanks really helpful and quick!

@IreneEAslin.QuantumExploration 3 жыл бұрын

Thank you. Very helpful!

@kathrynrobinson2444 3 жыл бұрын

I don't care how she took it out, I can figure that out myself. I just needed to how she got it in. I sent back two replacements from Amazon thinking the cartridges were too small...Duh. Thanks for the tutorial.

@shirleywhitlow9056 Жыл бұрын

Kathryn, how would u know, if it's guy or a girl hmmm?🙄🤭

@hamidmohammed3916 3 жыл бұрын

Thank you

@shirleywhitlow9056 Жыл бұрын

I have a brother DCP-J140W. I would like to know how the ink cartridges are put back in, because lt won't lock in place plz.

@chandanisahani3768 5 жыл бұрын

Tysm sir your video is very helpful for me

@cheadblue1069 3 жыл бұрын

Are there any retaining clips on the lid

@Lotus_Comp 2 жыл бұрын

toner baru siap pakai atau belum bertmasuk isi sebuk?

@canito1988 5 жыл бұрын

Thanks you - from Perú

@EmberHarrington 3 жыл бұрын

But what about that little white cap at the end that needs to come off? I dont know how to get it off?

@ivan868 8 жыл бұрын

Very useful, thanks!

@HowBigistheMap 8 жыл бұрын

Thank you so much!

@1stjunaid 2 жыл бұрын

After replacing the toner cartridge how to reset low toner error on software???

@astaban6621 6 жыл бұрын

thank you so much

@niashama 4 жыл бұрын

thank you

@Bodragon 4 жыл бұрын

(0:40) - *_"separating"_* >

@anitarajput11 3 жыл бұрын

Amazing

@harundoe1 3 жыл бұрын

Last week a bought a brand new printer (same model) its always jam my paper, I used 85gsm paper but not solve the problem, I lost my receipt so I can't return it, could you please help me... Thanks

@shirleywhitlow9056 Жыл бұрын

Probably because u haven't cleared out the paper, that was in it, im only guessing, im not a techo though.

@hennashorts9798 4 жыл бұрын

Bro how much cost of the toner

@rlcsd.1732 4 жыл бұрын

I think its like 45 dollar for 1200 prints (TN-730) or 90 dollar for 3000 prints (TN-60). I think it comes with 700 base

@hennashorts9798 4 жыл бұрын

@@rlcsd.1732 india cost bro

@rlcsd.1732 4 жыл бұрын

@@hennashorts9798 Which currency is that lol

@yilinwang1637 4 жыл бұрын

Thank u

@ingvarjohansson3004 6 жыл бұрын

amazing! thank you sir

@puanpp5239 6 жыл бұрын

รบกวนถามผู้รู้หน่อยค่ะ พอดีพึ่งเคยเปลี่ยนครั้งแรก เราต้องกดปลดล็อคปุ่มไหนก่อนรึป่าว แล้วจึงดึถาดดรัมออก

@amirahnuraini1341 2 жыл бұрын

hi, may i know is this printer has color ink ? sorry for my bad english

@inkspot7016 2 жыл бұрын

Hi Amirah, no this is a black and white printer. However Brother has many colour laserjets that would follow a similar procedure to replace their toners.

@Aslakki07 5 жыл бұрын

Thank You!

@diyarkamail1724 7 жыл бұрын

Thank

@bautistaeble9078 5 жыл бұрын

Gracias!!!!

@oussamanounou1 4 жыл бұрын

mais comment vous faites sortir le toner???

@salmamarmolejo8705 3 жыл бұрын

how do i print from computer

@gurpreetpadda5998 7 жыл бұрын

Very helpful, thanks 👍

@1topor 7 жыл бұрын

Merci

@totoeroe5039 5 жыл бұрын

Do i need to do this everytime the toner or ink goes out? Its kind of expensive...

@inkspot7016 5 жыл бұрын

Unfortunately yes it does. The toner is what actually makes the imprint on the paper, so when it runs on the cartridge needs to be replaced or you can't print. There are some tricks to try and prolong your toner cartridge though, the most common being to give the cartridge a GENTLE side to side shake when it is running low. This redistributes the toner powder inside and can squeeze a few more prints out. As for the cost of a new toner, I would recommend trying compatible cartridges a go. The high quality compatible/aftermarket cartridges do the exact same job and save you a heap of money at the same time.

@Magic420Girl 5 жыл бұрын

@@inkspot7016 there are several videos on resetting the "toner low" message that yields more pages from the same cartridge and althought I haven't tried it, but I plan to becuase I did it with my old printer, some of the same videos that show you how to reset this function, will also show you how to refill the same cartridge with toner you buy on ebay, or maybe even amazon. Check it out, it really saves a heck-ova-lot of money. Better your buck in your back pocket!

@youngcombat 6 жыл бұрын

How often should I change my drum? I usually change my toners once per month.

@inkspot7016 6 жыл бұрын

Hi there, it depends on your printer model. For example the printer used in this video is the Brother HL-1110, a toner for this printer has a yield of 1000 pages and the drum has a yield of 10,000 pages. So the drum would usually need to be changed after about 9-10 toners. Drums tend to have a much longer life span than the toners, but your printer should give you a warning when it is starting to reach it's end of life and needs to be replaced.

@youngcombat 6 жыл бұрын

Really aprreciate your answer. I do have a Brother HL1212W, which is quite similar to the video's model, I suppose. Thanks!

@gkselectronics6009 3 жыл бұрын

toner need

@mrhuman4570 7 жыл бұрын

WHAT DID HE DO IN THE END SLIDING THAT SMALL KNOB?

@inkspot7016 7 жыл бұрын

The sliding part you are talking about is used to clean the corona wire on the drum. It normally sits to the left side of the drum unit and isn't touched during the process of changing your toner, but was accidentally moved filming this video so was pushed back at the end. You shouldn't have to worry about this when changing your toner cartridge over though.

@mrhuman4570 7 жыл бұрын

Inkspot Franchising lots of thanx for this comprehensive clarification

@Magic420Girl 5 жыл бұрын

@@mrhuman4570 Please tell me why that little green alien on my brand new machine has a direction lable that seems to tell the user to slide it to the right and make a U-turn with it. Did I miss something in my intial set-up that I am now finding since I am changing the toner cartridge for the first time? If not now, when would I apply the little directions that are on the lable just to the back of it and still on top of the cartridge holder or drum... whatever thingy

@fifimetwalley2358 6 жыл бұрын

How do you know if the ink cartridge is stable?? Please reply ASAP

@inkspot7016 6 жыл бұрын

I'm not quite sure what you mean by stable? If you are asking if it works well, well I'm happy to say yes, it definitely does. Hope this answers your query.

@sharperguy 6 жыл бұрын

uhh how do you remove the drum?

@inkspot7016 6 жыл бұрын

It can be different depending on your printer model, but with most of the Brother mono printers, like the one used in the video, the drum will simply pull out. They usually have a handle part (the one in the video has a handle on the green plastic part) which you use to pull it out and slot it back in.