conectandoun gps garmin striker plus 7sv en mibote
Пікірлер: 57
@steveweiss20813 жыл бұрын
I’m installing the same unit on my boat this weekend. Your video has been a great help. Thanks for sharing my friend.
@machetefishing18753 жыл бұрын
Thanks brother for the comment it is a very nice machine
@rogerdrum5936 Жыл бұрын
Great video. Glad you left the mistake in the video you had it installed upside down. That was great
@machetefishing1875 Жыл бұрын
Thanks brother I really appreciate Thanks for watching
@MrGeorgeferreiraАй бұрын
very good .thank you.
@rcnmasterplumber3 жыл бұрын
Muy Detallado Yo Tambien estoy Esperando Mi Garmin Striker Vivid 7SV “ My First Time With A Solid Fish Finder.....i Was Looking For Instruction And Installation And I Have To Say Your Video Thought Me Alot Thank You Machette
@machetefishing18753 жыл бұрын
Gracias hermano buena compra
@southernexposure123 Жыл бұрын
Thanks for the video. I'm about to install my first finder. It's the same as yours. Your video gave me information that helps me be comfortable about putting it on.
@machetefishing1875 Жыл бұрын
Thank you for watching
@ernestogarcia3384 Жыл бұрын
muy buen video yo acabo de comprar uno y oi lo boy a instalar saludos des de las vegas
@JakeCharles_thechattychippewa2 жыл бұрын
Gracias my man! I'm gunna be buying this unit soon.
@mikewiththebluecar Жыл бұрын
Awesome job brother. The only suggestion I would make is when your drilling into the transom to mount the transducer, I’d put the mounting screw up against the drill bit and wrap a piece of tape around the bit to mark how deep you need to drill. This way your not drilling any deeper than you have to. Just my opinion. I was really surprised at how you have to bend the transducer wire back toward the mount. Not sure why they would design it that way.
@machetefishing1875 Жыл бұрын
Thanks brother I really appreciate 🙏 and yes you are right about that. Some time I play a little bit too lazy
@rogerdrum5936 Жыл бұрын
Great great video bro! Thank you for sharing. I feel confident I can do this too. Thanks!!
@machetefishing1875 Жыл бұрын
Thanks brother if I make it any body can make too
@felippecacula91893 жыл бұрын
Comprei um desses ontem ... belo vídeo irmão
@machetefishing18753 жыл бұрын
Gracias hermano
@davepleus79453 жыл бұрын
Thanks for the install video! Mine should be here tomorrow!
@machetefishing18753 жыл бұрын
Thanks for the comment really simply and really nice piece of machine
@buckybucky12502 жыл бұрын
You are the best and I’m also Dominicano hermano !
@machetefishing18752 жыл бұрын
Gracias hermano te lo agradezco
@wniner81943 жыл бұрын
Nice video! Thanks for taking the time to make it!
@machetefishing18753 жыл бұрын
Thanks
@arodriguezjtube Жыл бұрын
Excelente video Bro. Me acaba de llegar el mio y lo instalare este fin de semana
@machetefishing1875 Жыл бұрын
Gracias hermano
@DannyWalker1949 Жыл бұрын
REAL NICE Job on mounting your Striker 7sv unit. I liked and Subéd too.
@machetefishing1875 Жыл бұрын
Thanks brother I really appreciate 🙏
@BrisasRosel Жыл бұрын
Tu haces de todo un poco. Pues yo aqui protejiendo mi cuenta de los buitres asi que mucho ojo. Besitos a Pito
@bamadondon0495 Жыл бұрын
So when connecting this unit, all you need to hook up is the black and the red wire for power? I am mounting mine on the front of my boat and connecting my transducer on the bottom of my trolling motor, and I already have power at the front of my boat for one of my other units. So all I need to do is just connect the red wire for power and black for ground? Read for hot and black for negative?
@machetefishing1875 Жыл бұрын
All you need is power but remember if you connect straight to power you have to turn on and off manual
@Michael-zc7sj3 жыл бұрын
Great video man!
@machetefishing18753 жыл бұрын
Thanks brother
@slabbusterrtr76903 жыл бұрын
I have this unit its really hard to beat for the price had it 1 and a half its froze a couple times but just unplug the power wire then turn it back on its fine... but I'm happy with it
@machetefishing18753 жыл бұрын
Yes man I think it is a really nice unit 👍I don't use my to much yet but I liked
@brendagwynn674811 ай бұрын
Great instructional video
@machetefishing187511 ай бұрын
Thanks i really appreciate 🙏
@TheIceman1012 жыл бұрын
You might want to use a ratchet drill that's ajustable to make sure your screws are tight, I installed mine a few days ago.
@machetefishing18752 жыл бұрын
Thanks brother
@wahness11 ай бұрын
did you need to do anything with the yellow grounding wire on the back of the unit?
@machetefishing187511 ай бұрын
I only connect the red and black wires and it running fine
@BrenoPescador Жыл бұрын
Perfect
@calebbranham99903 жыл бұрын
How did you get the rope through that flexible conduit to get to the back?
@machetefishing18753 жыл бұрын
Boss my boat the rope already there but what normally people use is a snake wired from home depot is strong and flexible
@jakeladuke83 жыл бұрын
I have the same unit that I installed but took it out today and my side imaging wasn't the greatest. Do you know any adjustments I can make to get it clearer.
@machetefishing18753 жыл бұрын
Boss man I think that goes in to how far you want to see
@kylekellogg17232 жыл бұрын
Can I run this right to an extra battery I have? Or do I need to tie it into existing wiring?
@savagelexlex12962 жыл бұрын
Thanks :)
@azekjohn7687 Жыл бұрын
Hi mate..can I ask the power wire can I direct connect to battery..big battery with original fuse come with the units.
@machetefishing1875 Жыл бұрын
Yes sr that is exactly what I did
@azekjohn7687 Жыл бұрын
@@machetefishing1875 oh ok thanks a lot for the beautiful video and the details..
@machetefishing1875 Жыл бұрын
@@azekjohn7687 thanks you for watching
@kalebulloch19333 жыл бұрын
What size drill bit did you use?
@machetefishing18753 жыл бұрын
I don't remember but you have to used drill bit a little bit thin then the screws are you going to used
@Michael-zc7sj3 жыл бұрын
5/32
@nihle7380 Жыл бұрын
How are you going to show a video of installing this unit but you didn't show the part on the trolling motor? When you buy a unit and watch a video you expect to see everything it takes to install it. I like your video but what the hell do I do up on the trolling motor? Guess I'll have to read the damn instructions instead of wasting my time on a video that is half-assed with the installment.
@machetefishing1875 Жыл бұрын
My friend i don't know how you lose your time watching the video. Because in the first minute of the video I said this part is for the trolling motor i not going to used and put away
@nihle7380 Жыл бұрын
@@machetefishing1875 Exactly bro, that IS the part I wanted to see. I would have liked to see the install from beginning to end with ALL parts of the unit. My main reason for me watching your video was how you do the parts on the trolling motor But hey, it's cool and I still watched the video you made. But I'll figure it out. I just wanted to see you do all of the install so I don't mess anything up. Peace ✌️ bro...