Installing High Tensile Barbed Wire | Do's and Don'ts to Proper Fence Installation

No video

Installing High Tensile Barbed Wire | Do's and Don'ts to Proper Fence Installation

Рет қаралды 94,849

Күн бұрын

fencing.bekaert... - #TheFencePros at Bekaert demonstrate the proper way to install high tensile barbed wire. We'll cover some tips / tricks and do's / don'ts to think about throughout your fence project. The guys will also touch on the best tools to use for your fence installation. Have questions? Drop them below!
Our fencing products including high tensile barbed wire, fixed knot, field fence, and horse fence are American-made and produced in our Van Buren, Arkansas, USA, manufacturing facility.
Need more installation or product recommendations:
Barbed Wire: fencing.bekaer...
Tools & Accessories: fencing.bekaer...
Visit our website: fencing.bekaer...
Follow us on Facebook: / bekaertfencing

Пікірлер: 60

@tjabaley Жыл бұрын

Thanks guys. Great refresher. Getting ready to start my cattle fence and havent put up fence in 42 years.

@metaspencer Жыл бұрын

Awesome to see guys. Thanks for sharing your tips and tricks

@jimfarris9671 Жыл бұрын

Always stretch from the bottom to the top in case your corners do give

@jovanivalterfagundes9425 Жыл бұрын

Vcs usam mourões de eucaliptos tratados, como mestres e balanços de estacas metálicas, e o tratamento delas galvanizado com várias camadas. Adorei o Tork com este sistema de travas, tanto o engate rápido que prende o fio de arame, quanto o travante prende na corrente, muito top. Valeu meninos o meu muito obrigado, show, nota 100

@BekaertFencing 10 ай бұрын

Thanks for the positive feedback!

@IsikeliVasuca 6 ай бұрын

Thank you for teaching

@mj-ls7qr8xp3n 5 ай бұрын

Thanks!

@zyrianaarenee453 5 ай бұрын

K I need to install the BW to the wire in my storage unit to keep theives out?

@jimfarris9671 Жыл бұрын

And when you get to the bottom your top wire will be loose

@nalley6815 Жыл бұрын

Even when I start at the bottom to the top the wires I started with are looser at the end. Don’t know what I’m doing wrong

@jimmystevens3580 Жыл бұрын

Strong braces do not allow slack to occur

@nalley6815 Жыл бұрын

@@jimmystevens3580 mine are strong. Can’t figure this out…

@adamfooks7248 8 ай бұрын

But even the very best braces ‘take up’ for a tiny bit…..that’s why you should always start on the bottom

@jjones503 2 ай бұрын

@nalley6815 I am preparing to do this for the very first time, but it seems like leaving extra at the end wrap would be smart so you can come back and do a retension maybe?

@santiagodominguez2522 2 жыл бұрын

That was so helpful

@BekaertFencing 2 жыл бұрын

We're glad it was helpful. If you have any questions we're here to help!

@KalvinistKyle Жыл бұрын

2 questions: 1, do you install wires from bottom to top? 2, what exactly do you mean by pressure side?

@LaunderFarms Жыл бұрын

Bottom to top

@nalley6815 Жыл бұрын

Pressure side is the side cows would be pushing against.

@derekdodd8137 Жыл бұрын

I really need to know what type of metal pole you are using here for bracing. I’ve searched high and low and can’t find anything. I think this is a better solution than a wooden bracing pole. Any information on this would be extremely helpful. Already bought my cattleman pro and drill chuck for the job, but need my bracing poles to start. Thank you!

@clifford6119 Жыл бұрын

You can get them at Home Depot. It's a galvanized metal fence post.

@jjones503 2 ай бұрын

@clifford6119 thanks for sharing the info. Prepping to run a new fence for my very first time and I was wondering. How is it fastened to the wood post? Pure tension? Are the posts bored an inch or so to hold the post? Thank you sir.

@leeharris725 Жыл бұрын

My thumb feels a lot better just looking at the stapler. But Lord, it's expense. Perhaps Milwaukee makes one that I can use all of my M18 batteries with?

@BekaertFencing 8 ай бұрын

Yes, you're right the price point is more for someone who is installing fence a majority of the time.

@wrsine32931 6 ай бұрын

how do you maintain the correct barbwire spacing between rows - Measure ???

@mj-ls7qr8xp3n 5 ай бұрын

How did you? I'd assume you just count nubs on t post.

@HTSS8 2 жыл бұрын

14g not the 15.5g? Tractor Supply makes good pricing for the 15.5, suggesting the higher demand and volume of purchasing by their customer base makes them have buying power and pass on to customers.

@robert_blackmon_fishon Жыл бұрын

I could be wrong but it looks like a 4 point and your listing at the end says its a 2 point. Which one is it? is this a class 3 wire? How come Tractor Supply sells it but no stores carry it in stock anywhere in Texas?

@BekaertFencing 10 ай бұрын

Whoops, looks like you are right! We did indeed install 4 pt and the wire had a Class 3 coating (or blue labels). Our Cattleman Pro barbed wire products are sold all over Texas. SASCO sells it through their network, both Cattleman Pro and StaTite50. If you need us to find a dealer for you let us know.

@jimmystevens3580 2 жыл бұрын

Why do you not show installing all 4 other wires. How do you get the next 4 strands on the non pressure side of the braces.

@BekaertFencing 2 жыл бұрын

The process to install each wire is the same as the first wire shows. You'll want to keep you wire on the pressure side as Keith notes around minute 2:20. Because we are going around a curve we altered the pressure side to the non-pressure side. For straight runs you would keep it all on the pressure side.

@davidgregg2778 2 жыл бұрын

I was wondering that also . Do take the roll of wire off the 4 wheeler and go underneath the top wire to change sides of the post ? I would have also liked to see the wire stays that you use between posts .

@manuele1232 2 жыл бұрын

how are you friend Where to find special Chuck and the Clipper post please thanks greetings

@BekaertFencing 2 жыл бұрын

Hello! We are great. We offer both the drill chuck and the clips through our dealers.

@CalebMcDonald1 Жыл бұрын

What’s the link to the drill Chuck that you use?

@BekaertFencing 8 ай бұрын

Here you go: fencing.bekaert.com/en/fence-products/drill-chuck-for-11-ga-pipe-clips

@bloodshotview 2 жыл бұрын

What’s the difference between 18 gauze and 15.5 gauze barbed wire?

@BekaertFencing 2 жыл бұрын

I believe you are referring to gauge. 15.5 gauge barbed wire is going to be stronger than 18 gauge barbed wire. Our 18 gauge barbed wire is intended to be used as a temporary solution.

@westonandelin4556 2 жыл бұрын

I'd like to talk to a Bekaert rep. I installed several miles of gaucho wire in snow country. Worst fencing decision I've ever made. Every spring the wire has tons of breaks in it and where it isn't broken it's loose. Is the cattlemen pro any better? I've switched to hi-tensile smooth wire and it seems to be working great.

@BekaertFencing 2 жыл бұрын

Hi Weston, we are sorry you're facing issues with your product. This could come down to how the product was installed. Let's get you in contact with our team, please reach out to us here: fencing.bekaert.com/en/contact-us

@westonandelin4556 2 жыл бұрын

@@BekaertFencing Thank you for responding. I just sent the info to contact you.

@nalley6815 2 жыл бұрын

@@westonandelin4556 you’ve gotta be over tightening it. I have no problems

@leemarchant7191 Жыл бұрын

That’s really interesting. Best wire we’ve put up in snow and elk country. Not a broken wire in 20 years.

@westonandelin4556 Жыл бұрын

@@leemarchant7191 That is interesting. I'll probably remove it this year. The gaucho wire I used in low country has held up fine but I'm not a fan. Maybe I overtightened it.

@user-ch7ls2rj6z 10 ай бұрын

The home Depot

@BekaertFencing 7 ай бұрын

Our products can be found at local farm and ranch stores, some retailers but not Home Depot. Need to find a location? fencing.bekaert.com/en/find-a-dealer-fence-contractor

@adamfooks7248 8 ай бұрын

Using cheap ass Chinese wire strainers WILL hurt you one day. Use hi quality ones. Buy once, cry once. You should be running your wires bottom to top. Firstly to allow for take up on your braces and secondly, it’s easier to run your remaining wires