That must be (is) the tidiest consumer unit installation i've ever seen, and i've seen a few. Well done Tom.

Getting more and more like cars, just as the mechanics get reliable it will be the electrics and software that lets it down. Great job, thanks for sharing.

Nice to see such a neat consumer unit.

We were installing knx and recessed long light 20 years ago in my country. Welcome to the modern World Thomas!

Nice video! My OCD was very satisfied with your fuse board terminating 😍⚡️

That second fix didnt disappoint Tom. The D boards are a work of art. I install industrial CAN network and ProfiBus equipment fairly regularly and can see KnX/Dali appearing more often on Domestic/Commercial installs. Great work mate.

the board looks so tidy, i love it

Great video ! Good look at the Knx stuff ! I miss installs like this having moved into maintenance!

Hi Thomas, thanks for the video. At least one of the few on youtube that are in English. Is there a way to do a detailed KNX installation perhaps on your next KNX project. Thanks.

One of, if not the neatest consumer unit I’ve seen. 👌🏼

The consumer unit looks fantastic Thomas, you can tell a lot about a sparks by looking at their DB board and you obviously take a lot of pride in your work. :)

Great job. Nagyon ügyes munka, most kezdem, remélem még sokat tanulok tőled.

I have not seen such a tidy board in the UK for a long time. Nicely done. Looks great.

The board looks awesome, I like how the wires are dressed.

I like the effort you made to keep it neat - why don't all electricians work this neatly! Thanks for sharing.

Hey Tom I'm an electrician in canada, can't stop watching your videos even tho they have nothing to do with canadian electrical, but you do some fine work boss, keep it coming.

Knx is innovation for residence and buildings, I'm at the beginning of my 17 year old! Brazil!!!

11,000 views in 12 hours! Go Team Nagy. Great Vid - thanks Tom.

Nice neat work , keep the vids coming . Awesome 😀

Us poor folk have to go the cheap way. "Alexa, dim the living room lights". xD

Lovely wiring inside the CU case!

Great information, just ordered a few of those Contactum Defenders they look awesome. What trunking are you using between? Can you do more on KNX and Automation on this channel?

There are different schools of thought about load distribution in a consumer unit. Personally , I don't put all the high current circuits closest to the main switch by default, after all, how long a time period is a electric shower going to be active in any 24 hour period in a domestic setting ? I tend to balance the loads ( heat wise ) across the consumer unit rather than concentrate them.

Another great talk through Tom 😊 I’m not an election but I find your channel really interesting and informative with fun attached to it......😆 It’s sunny out side and we’ve not seen your bike out yet lol 😆 Stevie.

Very nice! And thanks for your opinion on ring circuits. I agree 100 per cent, except where a lot of sockets are on a very long cable run, in which case an intelligently layed out ring can be better in terms of volt drop. But even then, one could start the radial with a larger cable, and reduce the size later in the circuit (a 32A could start in 6mm and reduce to 4mm further down).

Nice work!, Greetings from Chile :)

Nice install. I have a wylex isolator switch which allows for two sets of tails out of the bottom. Much nicer looking than Henley blocks.

Beautiful neat work. Tidy board -> tidy mind -> tidy job (I suspect). Choosing which tradesman to ask to do a job is always a challenge; on all the available evidence, your work looks great.

That fuse board though 😍😍

Hi Tom....Nice job....Could you tell us all about the maximum demand on the 20 way boards you are installing...and do you have a 100Amp main fuse on that little lot?

Works alot like our Danish LK IHC and IHC Wireless. Have plenty of empty pipes in all directions. Customers always want to expand the system as soon as the start using it. That’s why we have the wireless modules now.

A 20-way Main Switch board... That’s one expensive board but something’s tells me money wasn’t an issue on this job 😉

Where did you learn to wire with knx and other kinds of smart home technology?

Nice, We are getting into the electronic switches too. Wifi switches and receptacles seems to be popular here. Electrical trade is going more electronic all the time as new ways to do old things. Every receptacle in a house here must be arc fault protected so that adds about $1000+ to the electrical installation bill. Love the videos and please keep they coming. Would like to see the mains coming into a house from the utility and going to the meter socket. Conduit is used to the electrical panel.100 amp services here is common for average house with 200 amp for bigger residences. Thanks from this old burnt out electrician in Canada.

I am training to be electrician all our love to all for you . Your the best

Hi Tom, what sort of training course did you do for the KNX and do you do the commissioning as well?

Hi Thomas, I just subscribed. I was wondering where I can get the recessed led strips from? I am looking for this sort of thing for a job I am doing.

Nice job Tom.

Do you have a link for those recessed LED strips please?

Yeeaahh a new video 👍🏻👍🏻

Hey love your vies ;) What is the name of the ceiling led strips ?

That consumer unit is incredible, love it if you can share your method

What's the antagonism to ring circuits? I'm genuinely interested.

Love that super tidy board. Tom. Ive completed my AM2 and would love to come and work for you. If you need an additional spark to build upon the NAGY SPARKY EMPIRE I'm ya man. 👍

Awesomeness

Good vid mate

Really like your channel it’s a good insight to what it’s really like to be an electrician. You may get this question a lot but what’s the best way to be an electrician when you’re already in a full time job. Is an apprenticeship a good start or college or a home study corse?

Do you only have one live/fused feed going into the KNX board? Is that because there's only one floor of lighting circuits? If you had a larger property with multiple floors and perhaps KNX heating and blinds would you have more live feeds coming from the distribution board?

I have no idea what your talking about for half the video but its still entertaining af

Do you have to have a red colourd braker for smoke detectors/fire panels as at the place that I work at thay have them

Why do you not like ring circuits? Do you think radial circuits are a better job?

What’s the issue with ring circuits?

Where did you learn to do KNX systems

very interesting you are connecting KNX to Dali LED driver.

Which brand are the recess lights?

What are those long lights 6 minutes in to the video? They are awsome, would love to have those!

Have you ever wired up a grow?

Hi Thomas hope all’s good. Wondered if one day you could explain what the neutral wire does? Lots of conflicting info. on the net and everyone has their own way of explaining and would be good to hear from you. My understanding is that it is common to all three phases and is connected to the star point at the local substation. The neutral therefore carries current but no voltage as there is no potential difference as the phases cancel each other out. You therefore don’t get a shock by touching it on its own. The star point is also referenced to earth at the substation providing additional protection against shock. When connected to a load and a phase conductor there is a potential difference present at 230v and current flows. Is that understanding correct or not? Kind regards, Steve

Out of interest what band of knx stuff are you using? Controller/switches etc. Thanks

Do you do a lot knx systems?

Hi Tom. I would much apriciated if you could give me the product name and the supplier for the recess lights. Kind regards Norbert, PS. Love your videos..

Same fuseboard I fitted last week I personally hate RCBOs for terminating. Them windy earth and neutral tails are a pain to keep straight an tidy. How did u manage to keep them so tidy? Mine are usually filled with cable ties

@Thomas Nagy, 5:00 , I've installed a few of those at a large construction place. They are horribly tight for our wires. Normal 5G1.5 cables with Phase, Neutral ,Ground and two Dali. I prefer the cheaper knock off Chinese like product they opted for instead. Much better spacing and works just as well.

Ah a Zennio z41. Are you programming the ETS project yourself?

Is that multiple flats. If so would have expected a ryfeild

When downloading the program to the device, the download fails and it prompts that there is an error writing to the memory block. What is the reason?

Scrolling through the comments - I cannot find what make or model those led light fittings are.. they are beautiful and we want them ... you point me in the direction of where you got them or their exact name ??? Please and thank you.

Have you tried alexa to control the lights? They can be dimmed, timed and automatically switched on when you arrive home.

Your board is so neat and tidy, but as a panel builder in Ireland I am happy that the set-up of board/trunking/board etc would never happen here, normally contractor has a bespoke board built complete with all switchgear and knx in it together usually all wired to terminals with usually about 25% spare space for future use, it means you only have one thing to mount with one door and all in one enclosure. Board also comes complete with terminal matrix which explains all circuits. Drop me a line and I'll sort you out😂😂

Hi Thomas, never installed this lighting but it looks like addressable lighting, a bit like the addressable fire alarm systems that just sends a data signal to the actual fitting which you want to control....neat idea!

Why are you mounting on ply?

Hello Thomas and because of you im interested in being an electrician, but I need help with how to become it. im applying for a college but I don't know what specific course I should take to make me a professional electrician.

I home run all my lighting circuits back to node 0 room, then all my relays and io are in one place.

If the LED units are getting that hot could this become a fire hazard ? Nice to see that crazy Italian sparky does do your DB's (cables like spaghetti every where ) Nice neat boards .

I installed a KNX system for a ~250m² house a few weeks ago. it really is awesome, IF you know how the software works :D

In Australia for what you call KNX we use philips Dynalite

Best way big bwoy!!!

Doddle to replace....assuming you can still get the same size/model in 5yrs or so :)

How many f***ing lumen this place going to have?! It too bright already! :D Also serious OCD on fusebox wiring, good job Tom! :D

Quick hack for you if you measure the current output and drop it by 25% using the correct resistor on those drivers you'll barely notice the drop in light level but the LED's will last longer

OCD right there - I am joking! Very neat work, certainly better than mine!

your putting a knx cable into a dali device? i hope you mean dali on dali, since youhave a dali knx gateway... also, i see you use the of the best things about KNX, its open, so different manufacturers, your using GIRA for the psu and the gateway, and theben for the switching of the normal non-dali lamps, quite nice. i used dali in a big gym to control the lighting, in a building that has KNX, and i build out a little gimmic making the light "wave" trough the gym, now the maintainance guy can show of the lights using that. they even use that function to get attention if the break on a game is almost over and stuff, to get people back into the gym.

What's the evil of ring circuits?

Out of interest, if you don't fit ring mains, how would you wire a socket circuit where you need in excess of a 20A radial?

KNX, CBUS and Dali!! Fitted a dimmer switch for an elderly couple a while back whose son recommended it would be a good addition to their living room lighting plan... Had three call back's from the couple saying it worked the odd time and sometimes the light was not bright enough!! In the end you guessed it I replaced it with the old on/off switch... Smart lighting is not for all... Guess it will take a few generation's to completely adapt to it...

I can't get my head over how they use control wiring for panels and machine cords for wiring.

Putting the heavy load from right to left? Here in Sweden, we do from left to right. To be fair you're driving on the wrong side of the road as well. Thank you for uploading :)

I need to know what the recessed lights at min 5:55 are. Can anyone help me out and point me to the product name?

🤔 Things that are fustrating in the uk.. Ring circuits, solid core cable, bare earth, 110v on site, metal back boxes 😊👌

Hmm..dual rcd board, not quite 17th edition anyway. (I, know, 18th egg.) With that many ways why are you even bothering with standard consumer units anyway? There are some really decent Euro type panels available that would give you the flexibility and capacity. Are you suffering from customer scope creep or lack of planning?

Have you heard of LCN? Is it even a thing in the UK? It's a more affordable, simpler to install alternative to KNX, and I personally love it...

You run DALI over the green KNX cable?

I dont mind if its a ring or radial I like the flexibility of 2.5 though!!

I do favour RCBO boards they are a lot less bother than a hover.

Holy shit that’s neat

I will only have RCBO systems. Incidentally, whilst I can understand electricians not liking ring circuits, for kitchens, utilities and workrooms 32A circuits are still what's needed for flexibility so make those 4mm^2 radials.

Death to ring circuits! I've seen some here in the US in a few very old properties. It's always a nightmare.

I only shop at ITS now

please show as much knx as possible :D

Hi tom, when’s the prize being drawn for the nws set? Thanks