Thank you so much for videos like this. As a single mom I literally followed step by step pausing when needed to change my passenger light. I feel so accomplished. I can’t tell u how appreciative I am and for the money I saved.

Your video saved me 200 bucks from the dealership. Two bulbs were 32 bucks at Auto Zone. Number 20 Star screwdriver. The Gatorade (I did two sizes) tip was invaluable.....giving me all the room I needed. At 70....my arms are thinner so that helps. Your instructions were clear and concise and made the job easier than I could have imagined. I actually looked at 4 videos and ONLY yours made any sense. Kudos for your knowledge and expertise! I generally pay someone (a lot most times)...but you gave me the confidence to give it a try.... I feel a sense of accomplishment....my wife said we’ll put the savings towards a trip to the casino.....go figure 😐😊. From Michigan...(no rain....just snow)....thank you. Mark

This video made it super easy to change by bulbs. He explained every step perfectly. The hardest part for me was getting the old bulb out. My light had a different clip then what was shown in the video but after I figured it out it was super quick and easy to do. Thanks so much for all your help.

wow super easy thanks for your amazing explanation! I didn't even need my husband to do it!! I did it my self!🥳🥳

Thank you very much for the video! Simply the best instruction I've seen here on KZfaq. Changing the passenger side was a bit more challenging than the driver's side since I'm right handed. Thanks again!

Grew up watching my dad and helping boyfriends work on cars and I never would have guessed to go the way you did. Way more simple than taking all the other crap off on top!!

The Gatorade bottle tip was the bomb!

Thanks man!! My lady was very impressed how I was able to get this done after she was told all the complicated ways it could ONLY be done. I was done within minutes!

I just fixed my headlight by myself thank you so much

A great job explaining set by step directions. I was having a hard time because I was thinking the horn was in the way. Once I realized it wasn't. It took me about 15 minutes from start to finish.

Thank you for posting this. It was very easy to follow and a great step-by-step explanation.

I raised the hood to change my passenger bulb and the only words were WTF! And not abbreviated. Thanks for your video it walked me right through and saved a dealership trip

Worked. The first one (drivers side) was more difficult than second one (passenger). The clip is a pain to figure out. Rest is easy. Now you need one for high beams. Apparently wives (such as mine) like Traverses.

OMG!!! Thank you so much for this video. I recently bought this car and the bulb went out. Like you i spent hours trying to figure how to change it. I was ready to take it to a mechanic but they were about to charge me a arm and a leg to change it for me. I looked it up on KZfaq and came across your video. Great way on how you explain how to do it and the extra tips you also mentioned in your video. Thank you once again.

Thank you so much!!, I like the way you use the right words and appropiate language, it is very cool to see videos like this with no cursing and really well explained, specially for us latinos trying to learn or perfection our english, BLESSINGS!!

You went above and beyond with the detailed tips. Thank you very much!

The tip on removing the clip first really helped. Thanks

This video is awesome. Perfectly described, great detail. I would have never had thought to go this way. Btw, to viewers who are doing the right side, a couple of the directions are the opposite, just keep that in mind. Great video!

Thank you for a 66 year widow on a tight budget! Tried before and got frustrated, then I saw your video turning the steering wheel and the Gatorade bottle! Wow. Happy and Blessed New Year to you and yours! Now I need to change my shocks😀

Great instructions. Hardest part was feeling where the clips were on either side to remove the bulb. That took the longest. Other than that, instructions were simple and the Gatorade bottle worked well. I had a small tray on the driveway to keep everything in to prevent it from rolling around. Thank you very much.

After watching your video, it inspired us to do it ourselves. Thanks so much for sharing!!! We were able to complete it in under 20 minutes and save big $. All the best to you!

Watched 3 videos and they were very confusing. You made this very simple. Thank you!

TY for posting and got showing the details in getting the bulb out by turning it and the sides of it. So helpful! Saved me $200 per bulb in labor!

You have save me sir. Thank you so much for a detail video and saving me some money because these dealerships and mechanic shops ripping people off to change a dam lightbulb.

OMG thanks your video really helped me understand how to change out my bulbs.....I will be doing it today.....such a life saver

Just wanted to say thanks for the detailed video just got done on also my wifes Traverse took about a half hour both sides even tho it only needed the driver but thats just how I am like u said mine as well do both. Hers were alot easier than the ones on my CTS. Thanks again 👍

I just got me a 2014 Chevy Traverse and I want to install led headlight bulbs and watching your video helped me out alot😁😁

I've watched 3 videos on this now and you're the only one who actually showed the car up above the wheel well. That helps me a lot as I'm not mechanically oriented!

Thanks for posting this video. Took me more time to put the bottom screw back in than to change the bulb

Usually don’t comment but I watched a couple videos on this and yours was the the most helpful thank you brother

Great video bud! Lights are wrkn! Way easier than I thought.

Great video, thanks for sharing. I just replaced both driver & passenger side lights on mine (2016 Traverse).

Last year (2020), my Texas dealer wanted $250 to replace my left side low beam bulb on my 2012 Chevy Traverse LTZ. I'm not a car guy so I found a body shop that would do it for $100. Watched them fumble around with it for 45 min but they finally got it done. 3 days ago (May 2021), my right side low beam went out, ordered ACDelco part for $7.95 on Amazon which came in yesterday. Watched this video and replaced the bulb in about 20 min, 10 min of which was me fumbling the new bulb re-screw-in because I was dead set on doing it backwards. Once I pulled my head out and turned the bulb the other way, it went right in like a charm. All I did was unscrew the 3 Torx 20 screws, pulled the rubber back, inserted a duck decoy instead of Gatorade can, did the rest by feel - easy peasy. Was able to do it by feel by watching how you did it with the flashlight. THANK YOU SO MUCH for this video!!

My 2009 Traverse had 7mm hex screws instead of torx 20 head screws. Could have been replaced by someone at sometime. Also my 09 inner fender wrapped under the bumper supports to the front and had two philips head screws that I removed along with a plastic body type pin that I pulled out to let the inner fender pull out better. I did make the mistake of removing the bulb before taking the connector and clip off-fits pretty tight and in a tight place. Take the clip off while bulb is still in makes it a lot better.

Dealership: That will be $350 to change both headlight bulbs, sir. Me: Ha! KZfaq it is then. *Hangs up phone*.

Dude, I wished, I had found your video a few months back. Wouldve saved me, some serious money on paying the dealer to do this.

Best one out there for this, great explanation and camera work.

Thank you so much if I had you tube long ago for my Malibu I wouldn't have paid 230.00 just to change out bulb. Blessing to you sir God bless

Love your video!! Clear and easy to understand. Thank you!!

Life saver. My first attempt was the typical method, try to take off the pop rivets and go thru the top. Nope... this is the way. Thanks

I did it!! I can be barely put gas cap on!! Lol thanks sooo much. My husband had little faith .. he said had to take all that stuff under hood . Ty Ty Ty !!

I was dreading having ro change my light bulb because I thought I would have to take the wheel off to get to it. Going to work on this tonight. Thanks!

Thanks! Great video with clear cut instructions.

Dude thank you my headlight in my traverse went out and yea i didn't want to go through the hood but now that i seen this...makes it so much easier thank you very much!!!! Also hit the subscribe button keep up the helpful content...

Great video. I have a 2015 Traverse. Took me about 45 minutes to replace one low beam light bulb. Will probably take me 20 minutes next time. I had 1 tab on the back of the connector at the bottom to push in, not 2 on the sides and I had to study it for a while to figure this out. And the screws have a torx T20 head if anyone is wondering without watching the whole video. Thanks!

Thanks . I saw previous videos that highlighted the two, but not the bottom one. I was puzzled where the 3rd one was

Great job showing the little details.

Thank you this will be my first time changing a bulb..

At 5:39 you said to turn the housing clockwise but actually turned the bulb cover counterclockwise.

Worked perfectly. Thank you, sir.

I just changed my headlight following your video thank u

Hey thanks so much man! Gonna do this today to my wife’s car 🙏🏼 great camera work! You described it visually to a T. What bulbs did u use for that exact headlight?

Excellent,even I was able to follow.

Thanks for this. Saved a ton of frustration

Great vid the groove thing really helped

Great Video! Fast and simple

Thanks. Worked perfectly

Great Video brother. Made it so I didn't have to buy a Haynes manual just to change a headlight out.

Very good video. Good video coverage

I agree with the comments below you did a great job with all the details & tricks to make this a simple job.

Thanks man! This was super useful and really helped me out a lot!!

Thank you thank you thank you! That is ridiculously helpful!

Thanks man. Ya I gotta do this in the rain.

Thank you! Best video on this.

it worked for me, first time. Good video Thanks Man.

Good video. Thanks for the help

Thanks 4 info Brother looks easy enough

Thanks that was very helpful 😃👍

ur a life saver thank you

Anyone know how to replace the high beam bulbs on a 2012 Chevy Traverse? We were able to replace the lower lamp bulbs in the turn signal as well the low beam bulb, but we can't get the high beam bulb since there appears to be a bracket that prevents us for turning away the bulb?

Thanks for the info. 👍

Thank you if it wasn't for your post I would have hired someone. We changed out both and it took us 5 minutes.

Great video!

Whats the tool called to remove the inner clips by the springs

Thanks for the helpful vid. Much appreciated

Saw this guy use a bungie cord from the hole of one of those screws to the hub cap to hold open that part you loosen if a Gatoraide bottle isn't readily available.

Great vid. Thank you, helped a lot

so simple/appreciate it man

Thank you, it worked great and was super easy, now ive done this before but didnt quite remember how to do it. i called the dealer and they wanted 190.00 to change them, and i was like, people in hell want ice water. whatever

Thank you just did it on my own🎉❤

Great video

best video I've seen!!

Dude!!! Life saver!! Thnx

Very helpful. Thank you

Thank you for posting! You saved me so much time.

Thank you excellent video

I miss the days when it was just three screws on top to remove the entire assembly, giving you all the room in the world to change the bulb. That's the way it *should* be. I'm glad ours has had the Torx screws replaced with Philips screws, though. I also check the bulb for fault marks (only on Travis), as ours had a wiring harness go bad. I'd love to remove all the extra bolts that aren't accessible and don't need to exist one day. I also don't have the energy to do both at once, and Travis is the only vehicle where I've known both bulbs to go out within a fairly small timeframe, so I don't do both at once.

Bro you rock thank you so much for this video.

Great vid.

Good Stuff I saw another video where they took the whole front end off to change a bulb!!!!

Thanks man, I gotta do this tomorrow for my girl

Good video

Makes since thanks

Thank you for this video. I can do this!!!💪🏽

Thank you so much 👏🏾

Thanks for that video...

Appreciate you man

Gatorade bottle smart af

Thanks bro.

A buddy of mine had a Acadia and couldn't figure this out. Took it to his local garage to have the bulb replaced. $45 for 2 bulbs and $300 labor in Virginia just outside of DC.