Had to fix my grill when got moisture in the auger cylinder and bricked it up with pellets. While it was apart I was surprised how flimsy the motor was installed inside. Bought this bracket to fix what Pit Boss should’ve designed better in the first place.
@corneliusmarshall5089 Жыл бұрын
For all those who have not purchased this modification bracket you are missing out on a great stabilizer for you Auger Motor. This was a cleaver and crafty idea that works!!!!!!!!!
@stevioclark3 ай бұрын
Love it
@TomHorsmanAmateurBBQ3 жыл бұрын
Nicely Done Dennis!
@garypekar20464 ай бұрын
Great video smoke daddy 10:09
@markorkarenhanes1354 Жыл бұрын
The free floating motor is by design, because the augers have an inherent amount of wobble or run out, and can also bind up. When the the auger wobbles, the motor is able to move around to get past the wobble. If the motor is mounted solid, all that auger wobble and resistance is sent directly to motors internals. Which will over time will wear out the motor. Watch the motor sometime when the auger is running. You'll see the hole motor move around to absorb the augers less than perfect tolerances.
@DennisCorrea Жыл бұрын
The floating motor has been an issue for many years. By mounting it more securely I believe gives you a better feed rate and helps to cut the harder pellets easily. If the auger shaft is not bent, there should be no wobble Thanks for your comments?
@markorkarenhanes1354 Жыл бұрын
@@DennisCorrea At eye level, roll any auger across a flat surface, and you will visually see warpage in the auger. Gaps between the auger and the flat surface, and the attached welded shaft moving up and down. It especially gets worse with heat, over time.
@DennisCorrea Жыл бұрын
That's exactly how I check it. If you can spin the auger with your fingers while it's in the white bushing, that's good. If it seems to be a little tight, you can always open the hole up a little bit on the white bushing.
@rogerdjs Жыл бұрын
The Oklahoma Joe Pellet grill already has a welded bracket. No need to modify after purchase...
@JohnHinton2 жыл бұрын
Thanks I'm going to try this. I don't Like the way pit boss did this looks really cheap.
@David07R1 Жыл бұрын
I need that bracket for my old 820 pro is there a link so I can get one love the channel thank you for all the help!!!!
I'm looking at a solution for the drip tray that sits on the right side of the smoker where the broiler plate sits and drips the grease to the bucket. Mine is rusted out and the broiler tray can barely sit on it anymore.
@Smokedaddyinc2 жыл бұрын
Give us a call at (847) 336-1329 and we can come up with a solution with you
@fritzcarlson2687 Жыл бұрын
Why do you only send 2 bolts to attach the plate to the new USA made auger motor when there are 4 holes? Thanks
@Smokedaddyinc Жыл бұрын
I believe that we missed the four bolts to attach to the motor in your order the 2 bolts that come with it are to attach the bracket to the auger shelf. If you give us a call we can definitely get the additional bolts out for you. We are sorry for the mistake.
@robertweber31403 жыл бұрын
Dennis, is this required for all new Pellets Pro smokers; particularly the PPV-2300? Or, do you have an effectively date for cut in?
@dallashahn34103 жыл бұрын
The PPV-2300 are coming with a different kind of motor that is already attached to the hopper assembly. This bracket is for existing hopper assemblies to help stabilize the motor. The new motor is pictured in the listing for the PPV-2300 smokedaddyinc.com/product/the-pellet-pro-vertical-cabinet-pellet-smoker/
@jeanetteprewett63303 жыл бұрын
Where do I get the mounting bracket? Thanks
@Smokedaddyinc3 жыл бұрын
You can purchase it directly from our website smokedaddyinc.com/product/auger-motor-aluminum-stabilizing-bracket/
@jimjohnson33072 жыл бұрын
How much does the brakes cost?
@Smokedaddyinc2 жыл бұрын
The brackets are 29.99
@bobbywillis90652 жыл бұрын
Do you sell the motor also
@Smokedaddyinc2 жыл бұрын
We do sell the motors as well, we sell pretty much any replacement parts and upgrade for pellet grills
@PLAGUEofDEMONS3 жыл бұрын
OH HELL YA! SHUT UP AND TAKE MY MONEY! Whoever designed the "floppy motor" disaster needs to be punched in the nose. Order inbound TYVM!
@codyyates3424 Жыл бұрын
SAME! Blew my mind when it started growling-torquing-slamming-BANGING and nothing attaching but the shear-bolt so when I seen them on eBay I bought it quick lol