Installing Power Steering Pump, Bracket & Alternator on C6. Boosted C6 Build. Part 34

No video

Installing Power Steering Pump, Bracket & Alternator on C6. Boosted C6 Build. Part 34

Рет қаралды 9,072

Күн бұрын

Boosted C6 Corvette Grand Sport LS3 Project Build. Part 34. Reinstalling Power Steering Pump, Bracket & Alternator.
WATCH ME WRENCH DISCLAIMER:
I am not a trained, licensed or certified automotive mechanic nor am I a professional automotive repair facility. Please consult with your local dealership and or a licensed and certified mechanic before working on any vehicle and make sure you utilize any and all safety equipment and safety measures at all times. It is also advisable to reference your vehicle’s owner’s manual for proper maintenance of your vehicle and for safety tips when working on your vehicle. The sole purpose of this video is solely for entertainment purposes as I document and share my build, that’s it. Due to factors beyond the control of WATCH ME WRENCH, I cannot guarantee against improper use or unauthorized modifications of this information. WATCH ME WRENCH assumes no liability for property damage or injury incurred as a result of any of the information contained in this video or any of my videos. Use this information at your own risk if you elect to do so. WATCH ME WRENCH recommends safe practices at all times when working on any type of motorized vehicles and or with tools seen, utilized or mentioned in this video. Due to factors beyond the control of WATCH ME WRENCH, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular results. Any injury, damage, or any type of loss that may result from improper use of these tools, equipment, vehicle, failure to utilize proper safety equipment and safety measures or from the information contained in this video is the sole responsibility of the viewer/user and not WATCH ME WRENCH. Please wrench safely.
Follow me on twitter @WATCH_ME_WRENCH and on Instagram @WATCHMEWRENCH. I can also be found on corvetteforum.com @ Watch Me Wrench

Пікірлер: 25

@AJPPP Жыл бұрын

6 years later this served as good reference for my rebuild lol

@WATCHMEWRENCH Жыл бұрын

Thanks for watching and I am glad it helped you out.

@87vertgt 7 жыл бұрын

Thank you Jeezus, this is exactly what I was looking for !!!!!!!!!

@WATCHMEWRENCH 7 жыл бұрын

Thanks again Big G

@87vertgt 7 жыл бұрын

my Vette has been in pieces for weeks as it's been such a chore dealing with the small spaces...gonna pick up the Crows Feet......I come from a Mustangs which have room for days...

@WATCHMEWRENCH 7 жыл бұрын

That is the only downfall of owning a corvette, there is NO room to work on these cars.

@87vertgt 7 жыл бұрын

good stuff Sir, I really appreciate it !

@WATCHMEWRENCH 7 жыл бұрын

So glad I could help, thank you for watchmaking and thank you for the kind words.

@SupaFlyResearch 2 жыл бұрын

Thanks for this OG

@WATCHMEWRENCH 2 жыл бұрын

No problem

@tucknation3232 2 жыл бұрын

Saved my patience lol thanx bro !

@WATCHMEWRENCH 2 жыл бұрын

That job is a nightmare. Glad it helped you out.

@ModernBeastx1 3 жыл бұрын

good info bro ty

@WATCHMEWRENCH 3 жыл бұрын

Thanks for watching and for the positive feedback.

@jarenlengert2642 6 ай бұрын

Do you happen to know the length of the three bolts for the bracket?

@WATCHMEWRENCH 6 ай бұрын

Im sorry I do not.

@NoMercyGTCS Жыл бұрын

I've got my motor out of my car (2005 Corvette) and I thought it may be easier to install all of the drive accessories before putting it back in. Would you suggest dropping the motor back in the car and then adding the accessories, like power steering pump, alternator, etc.. Or should I go ahead and install all of the drive accessories now and then drop it in? I'm in the process of adding an ECS blower and thought it would be easier to add all of the idler pulleys, belts and brackets while the motor is still on the hoist. Thank you for your detailed video.

@WATCHMEWRENCH Жыл бұрын

Both ways are difficult, but with all of the accessories on the engine it might be too difficult to set the engine in place.

@NoMercyGTCS Жыл бұрын

@@WATCHMEWRENCH Thanks for your help Sir!

@peewee7405 5 жыл бұрын

Why didn't you take the oring off of the new part, measure it and order one that size ?

@WATCHMEWRENCH 5 жыл бұрын

I tried doing that but no one claimed to have that size or part #. I went to 2 hardware stores and no one had that O-ring that i needed. Trust me I tried and spent a lot of time on that but I still could find the size I needed.

@enriquecastillo4604 4 жыл бұрын

By any chance do you remember the order of the hoses on the power steering rack? I this video has been a while. Thanks

@WATCHMEWRENCH 4 жыл бұрын

No I apologize I dont remember the order but if you watch my video called "Removing Power Steering Pump, Alternator Bracket & AC Belt C6 LS Corvette. Boosted C6 Build. Part 11" maybe you'll find the answers to your questions. Perhaps I show the hoses in detail.

@enriquecastillo4604 4 жыл бұрын

WATCH ME WRENCH ok thanks I’ll watch that one. I for sure should of followed your advice of taking pictures before lol!

@WATCHMEWRENCH 4 жыл бұрын

Thanks for watching I hope you find what your looking for and yes always take photos. i cant tell you how many times the photos saved me on this build.