The E36 gets the RK Tunes OBD1 Chip and Borla exhaust. #bmw #e36 #325is #drifting #driftbuild
Пікірлер: 51
@theamazingleagueofgentleme91502 жыл бұрын
Love the video man gonna be using this as a reference when I tune mine!
@cris_motorfide18572 жыл бұрын
Thank you I’m glad you liked it 🙌🏽
@mijadx12 жыл бұрын
Love it
@superseriooffical73144 ай бұрын
Hey so im just a little confused, with the pop bang tune the reason your removing cats is because it causes to much back pressure? Or is it just purely for the sound? I eventually want to chip my 92 325is and this video has definitely helped alot except fory question, thanks in advance 🤘
@mr.ceo1014 ай бұрын
Where you bought the rear lights
@mrkeopele3 ай бұрын
thumbs up from a ferrari driver, sweet
@cooked40487 ай бұрын
As someone with a certificate in esd this video is a good example of what not to do.
@dylbo62292 жыл бұрын
Will the tune work with the cats just no burbles right? Bc I live in Cali plan on keeping the cats on till I move out of state
@cris_motorfide18572 жыл бұрын
I would definitely recommend calling the company that your going to get the tune from just in case. Everything that I did in this video was specific for this tune 👍🏽👍🏽👍🏽
@EuroBoard2 жыл бұрын
Nice job 👍. What kind of Borla exhaust is it? Thanks
@cris_motorfide1857 Жыл бұрын
Thanks. I don't remember what model the Borla is. Lol.
@jeffreyramirez23042 жыл бұрын
Just got the same tune can i install chip without the o2 senors i will be putting it on soon as its required
@cris_motorfide18572 жыл бұрын
I would definitely message RK TUNES And ask, they are really cool about answering phone calls I have my O2 sensor on with my tune 👍🏽
@orionfalkenrath9848 Жыл бұрын
Be careful if you have a non stock engine the burble will act as a rev limiter at 4-5500rmps
@juliomartins6570 Жыл бұрын
do i need to change the chip, or can i just change the map with the pc?
@cris_motorfide1857 Жыл бұрын
Not sure what year you have but mine, I had to do the chip. But I recommend asking the provide of your tune and follow their guidelines.
@Vgk369 ай бұрын
No grounding strap. Yanked up from one side instead of using 2 picks one on each side and lifting evenly. Fook it 😂 sent ! 5:04
@cris_motorfide18577 ай бұрын
Fook it! Lol
@DumbSkippy2 жыл бұрын
Careful. Never touch a chip's connectors and always ground yourself before touching either the module or chip. Touch a water pipe will discharge any static electricity. Also static builds the most in cold dry air.
@imnota2 жыл бұрын
🧢 I work in IT and therefore used to work around chips and I'm qualified for it and I can tell you that whole static electricity is mostly bullshit and blown out of proportion. I obviously work in the industry amongst many other professionals and I've never encountered any of them that actually gave two thoughts about static electricity, and none of them ever had related failures either.
@arwil20432 жыл бұрын
Does turning on the ac make the pops less extreme?
@cris_motorfide18572 жыл бұрын
Honestly Not sure , unfortunately I don’t have a/c on my car I wouldn’t be able to tell you if it makes a difference Or not 🤷🏽
@christhantos6152 жыл бұрын
my car it does that w my exhaust
@CreamDrop2024 Жыл бұрын
What rpm’s does the “ burbles “ go off ?
@cris_motorfide1857 Жыл бұрын
It start around 4300 rpm an up.
@MistaMahcos2 жыл бұрын
Sliding into your DMs lol
@cris_motorfide18572 жыл бұрын
😂😜 🏎🔥🔥🎉
@itsskylerrr7716 Жыл бұрын
You said the tune would give you higher rpm are you not worried about valve float
@cris_motorfide1857 Жыл бұрын
not really. despite being able to rev higher, I don't normally need to take it all the way up there to break the tires loose how I want on a drift. but its a possibility, at you own risk. For what I'll be using it it will only be occasionally if needed.
@itsskylerrr7716 Жыл бұрын
@@cris_motorfide1857 I guess itd help get higher into the next gear I'd probably just start it out a gear high and shift down into a slide
@fernandoportillo92822 жыл бұрын
Why did you cut the green wire?
@cris_motorfide18572 жыл бұрын
Car would not run so I did as mentioned on instructions for this product 👍🏽
@adambond89882 жыл бұрын
Bypassing the ews1 signal the car needs to start.
@gcsytyler62862 жыл бұрын
i just got the chip i feel like it doesnt pop as much as yours
@cris_motorfide18572 жыл бұрын
Really 🤔 . And your obd 1?
@cris_motorfide18572 жыл бұрын
And your obd 1 ?
@Eljoejoesopa Жыл бұрын
It works on auto ?
@cris_motorfide1857 Жыл бұрын
Honestly I’m not sure but I would recommend asking the provider 👍🏽👍🏽👍🏽👍🏽
@bobbubevski27197 ай бұрын
what engine?
@cris_motorfide18575 ай бұрын
stock 2.5L
@Moocow444 Жыл бұрын
Do you still have the chip?
@cris_motorfide1857 Жыл бұрын
Yup still do 🙌🏽 i’m going to do a update video soon the car currently looks different now i’m also on IG you’re welcome to follow me there and see current updates😎
@Moocow444 Жыл бұрын
@@cris_motorfide1857 is the chip worth getting
@fernandoportillo92822 жыл бұрын
How much did the exhaust set up cost?
@cris_motorfide18572 жыл бұрын
It was about $500 with everything I mentioned on the video
@eze80242 жыл бұрын
That poor, riced out, e36
@cris_motorfide18572 жыл бұрын
Lol
@36aidan Жыл бұрын
we love our riced our drift cars
@hiddenundaflesh7 ай бұрын
damn that sounds awful dude, check on my set up and you’ll see