Installing SENA SRL-MESH onto SHOEI GT-Air 2

  Рет қаралды 28,484

Sena Japan

Sena Japan

Жыл бұрын

This video clip explains how to install SENA SRL-MESH onto SHOEI GT-Air2 helmet. Exercise extra caution when placing fine cables along the helmet shell.

Пікірлер: 14
@theraven423
@theraven423 6 ай бұрын
Great video, understood everything thanks to the good video-footage!
@Christerk
@Christerk Жыл бұрын
This is a very good and detailed guide, I wish you could do it with English audio or at least english subs 😉
@SenaBluetoothJapan
@SenaBluetoothJapan Жыл бұрын
Thanks!! We will try to put English subs when we can! Right now we are working on Tokyo Motorcycle Show coming up at the end or March. Maybe after that...
@majorgraphixx8953
@majorgraphixx8953 11 ай бұрын
@@SenaBluetoothJapanthanks because I definitely can’t understand this lol
@Japanec1
@Japanec1 Жыл бұрын
Самая лучшая видео-инструкция по установке! Спасибо 🙏
@SenaBluetoothJapan
@SenaBluetoothJapan Жыл бұрын
Мы рады слышать, что вам понравилось! Спасибо!
@ichbinmartin
@ichbinmartin Жыл бұрын
Hello, I have brand new SRL Mesh in brand new GT Air 2. Helmet is very loud and the volume of SRL is not enough. Biggest problem is that I absolutely do not hear the beeps during ride, so I don't know what I pressed and for how long. Is it possible to radically increase volume of the beeps?
@SenaBluetoothJapan
@SenaBluetoothJapan Жыл бұрын
Hi usually SRL2 has enough sound volume and sometimes it is too much. So if you can't hear enough volume, there maybe some issue going on. Please contact SENA Europe or your nearest SENA. Thanks.
@scottamolinari
@scottamolinari Жыл бұрын
Are you sure the helmet is the correct size? If it is too big, the helmet will be louder, because the seal around your face and neck is good enough. The helmet should be really snug. A test of the snugness is, it should be pretty hard to get on and off.
@ichbinmartin
@ichbinmartin Жыл бұрын
@@scottamolinari yes, i have correct size. what i can say is, that gt air 2 is much much louder than x-lite. specially in higher sppeds, over 100km/h. then is the sound from sena very difficult to hear.
@SenaBluetoothJapan
@SenaBluetoothJapan Жыл бұрын
@@ichbinmartin Hi I'm sorry not catching up the topic. Maybe you can try set the sound volume separately. You say you can hear music or the intercom sound with louder sound, right? Then, you can try this: 1. turn off the bluetooth of your smart phone that is connected to your SRL-MESH. (That way it doesn't automatically connect to your SRL-MESH when turned on) 2. Turn on your SRL-MESH. 3. Turn up the volume of the SRL-MESH until you hear beep sound (maximum volume) 4. Check that the beeping sound is loud enough for you. 5. Turn on the bluetooth of your smarphone ( it will automatically connect to your SRL-MESH) 6. Play music on the smart phone.
@ichbinmartin
@ichbinmartin Жыл бұрын
@@SenaBluetoothJapan Of course, i did it. Shoei GT Air2 is loud over 100 km/h. I think nobody tested the Sena SLR in real traffic on highways and wind. I of course set the loudness as you wrote. Problems are, that: Buttons are too small, often id I want to turn on the music, I turn off whole communicator. Ok, design limits. Beeps are too silent during ride. I can hear voice replies, but for example I cannot hear beeps, so I don't know, how long I pressed the button. Music in headphones is overall silent. I have also basic model 3S (in X-lite 702), this sounds much much better! If somebody calls me, I almost get the heart attack, how loud is the ringing. But then, the volume of call is not so loud and I cannot hear it very well. So I cannot find balance between ringing and calling. Voice commands almost does not work. I forget, on the phone shows me that intercom battery level is 40%, but intercom notices me that battery is low and after few minutes it turns off. I am sure, all of that can be fixed in firmware update. Radically increase the maximum volume for music, radio and calls, and beeps, slightly increase volume of system voice replies, decrease phone ringing to level of system replies. PS: I have set all volumes on my android phone to full (before connection and then after). As I wrote, with 3S it works much better, so I know how to set the combination.
@igurkii4497
@igurkii4497 Жыл бұрын
2:40 or 3:08 ? What is The optimal cable Management?
@SenaBluetoothJapan
@SenaBluetoothJapan Жыл бұрын
There's not much to show. you can tuck in cables inside of the pad.
БАБУШКИН КОМПОТ В СОЛО
00:23
⚡️КАН АНДРЕЙ⚡️
Рет қаралды 16 МЛН
Stay on your way 🛤️✨
00:34
A4
Рет қаралды 21 МЛН
EVOLUTION OF ICE CREAM 😱 #shorts
00:11
Savage Vlogs
Рет қаралды 7 МЛН
Install Sena SRL Mesh into Shoei Neotec II
16:55
Texas2Tires
Рет қаралды 43 М.
Shoei GT Air II and Sena SRL 2 - Install & Review
6:38
Man Cave Moto
Рет қаралды 150 М.
Install SENA SRL MESH install into a SHOEI NEOTEC 2 Helmet
18:34
On Two Wheels
Рет қаралды 29 М.
Installing the Sena SRL3 Communication System - Tutorial
6:47
САМЫЙ НЕДООЦЕНЁННЫЙ ФУТБОЛИСТ В ИСТОРИИ
0:51
Не пожал руку и жёстко поплатился!
0:51
МИНУС БАЛЛ
Рет қаралды 771 М.