Installing The AR637T Receiver In The HDSJETS-182

  Рет қаралды 9,666

Merry Boozer RC

Merry Boozer RC

Күн бұрын

HSD USA
hsdjetsusa.com/hsdjets-2000mm...
Horizon Hobby AR637T receiver used in video
www.anrdoezrs.net/links/10019...
Best airplane stand
www.bitgohobby.com/ernst-rc-a...
Boozer Barracks
/ @merryboozerrc
Boozer Merch
teespring.com/stores/merry-bo...
callie-graphics.com/collectio...
Like its predecessor, the AR637T features built in AS3X Technology, but now pilots can set up and program SAFE Technology to their aircraft. AS3X Technology (3-axis stabilization) works behind the scenes to smooth out the effects of turbulence so you enjoy a sense of stability and precision that makes it feel like you're flying a much larger, expertly tuned aircraft. SAFE Technology offers an extra level of protection so that RC flying is easier than ever before. When activated, bank and pitch limitations keep you from over-controlling and automatic self-leveling makes recovery from risky or confusing attitudes as simple as releasing the sticks. Programming and set up of AS3X and SAFE is done directly from your Spektrum transmitter* with an easy 3-step forward programming initial setup. To use SAFE and AS3X technology with the AR637T receiver, the receiver needs to be set up with a compatible Spektrum transmitter. With forward programming there is no need for apps or cables to program or make changes while at the flying field.
The AR637T features full range telemetry with an integrated barometer to provide altitude and vario telemetry data without additional sensors. Additional telemetry devices such as voltage sensors can be connected to the volt port and XBus telemetry sensors can be connected through the XBus connector. It also features an SRXL2 port for an SRXL2 Remote Receiver to add additional RF path redundancy (sold separately). An SRXL2 port is available to connect compatible devices, program and update the receiver, and bind with a traditional bind plug or connect a battery. The AR637T is compatible and ready-to-use with the Spektrum Smart ESC for even easier one-wire telemetry data. Spektrum Smart ESCs combine plug-n-play simplicity with the ability to communicate with other Smart electronics - together, creating the best-performing RC system for your model imaginable. For more information about Spektrum Smart technology please visit the Spektrum Smart Technology Page.
The AR637T receiver throttle port includes Smart Throttle. When equipped with Smart Throttle the standard servo connector delivers the throttle signal to the ESC, plus the ESC can send telemetry data back to the receiver. The throttle port will automatically detect when a Smart throttle compatible ESC is plugged in and the throttle port will begin to operate in Smart Throttle mode.
No more bind plugs! Instead, a large bind button is used to enter the bind mode. All combined the Spektrum AR637T gives you more in a 6-channel receiver than ever before, so that you can fly with the highest sense of confidence possible and have more fun.

Пікірлер: 71
@ryanhawks6600
@ryanhawks6600 3 жыл бұрын
RC pros taking the time to give this detailed advice/content on setup is so important!....and there is so little of it out there. Awesome job dude! Thank you 💪😎🤘
@timvanasen6711
@timvanasen6711 3 жыл бұрын
Nice tutorial Wes I put an AR637t in my Flightline B-17 Bomber The Air Marshal suggested it as I keep all my tech Spectrum for rc flight 😉👍🛩
@iramiller2389
@iramiller2389 3 жыл бұрын
Thanks for the helpful videos on the build and set up on this beautiful plane. Just finished assembly on mine and will set up on my DX9 with a Spektrum AR620 since I already have a spare one. Since you set up your Cessna on Spektrum, curious as to what TX settings you used for dual rates and flaps? Thanks!
@JohnHill-jm7tm
@JohnHill-jm7tm 3 жыл бұрын
SWEET. Nice video Wes and Ms Lori. This Old Man loves you two. ✈️😎💝💝
@normhalliday3969
@normhalliday3969 3 жыл бұрын
Great video. Thanks for doing it.
@skybasherrc2372
@skybasherrc2372 3 жыл бұрын
Very informative. I don’t own a 637T yet but I’m fixing to order one to go in the Arrows F-15 Eagle. Seems like a really good receiver.
@MerryBoozerRC
@MerryBoozerRC 3 жыл бұрын
Yep very easy to program
@mrk8212
@mrk8212 3 жыл бұрын
Thanks for this video. I have the same receiver to install in two planes, and have an ix12. Serendipity.
@VMCAviationVideos
@VMCAviationVideos 3 жыл бұрын
Great job!
@tughillrc6327
@tughillrc6327 3 жыл бұрын
Nice Video Wes and Lori, well done.👍😎✔⭐⭐⭐⭐
@user-rx8qq8sk9ydv1ce5ib
@user-rx8qq8sk9ydv1ce5ib 10 ай бұрын
Awesome! Thanks for the video. Everything looks amazing on this airplane,,Surprised about the whole landing gear is depending on this small plastic. Is it intentionally!
@charlesrestivo870
@charlesrestivo870 3 жыл бұрын
Nice and concise
@user-kx4tg2zk7r
@user-kx4tg2zk7r 10 ай бұрын
How do you get the receiver off the airplane if you need to after you glue it in. Some of my friends use 3M two sided tape. I think using Velcro would work also.
@kjb7229
@kjb7229 Жыл бұрын
Enjoyed the video - thanks! How did you set the recommended rates specified in the manual? Also, do you disable the FLP->ELE mixing that the black box (MFC-2065) provides? Others have mentioned you want this off if using a Spektrum receiver. Do you know how to disable?
@dronecatalyst
@dronecatalyst 3 жыл бұрын
On this aircraft, where did you mount the receiver battery? On the bottom of the battery compartment, or permanently on the side?
@boss2234
@boss2234 2 жыл бұрын
Grate job helps a lot
@mikessi
@mikessi 3 жыл бұрын
Great info.
@ChipMitchell
@ChipMitchell 3 жыл бұрын
Awesome
@mikebird8290
@mikebird8290 3 жыл бұрын
Thanks for this video WES. VERY HELPFUL SIR🇬🇧🛫✈️🚁🛩️🛬🇺🇸MERRY BOOZERS RC 👍🤩
@FlailinMonkey
@FlailinMonkey 3 жыл бұрын
Great video. 10:45 you can see the antenna resting on the control linkage, that's never a good idea for the long term, it could get caught or possibly worn through. You could run it underneath and tape it down to the foam.
@MerryBoozerRC
@MerryBoozerRC 3 жыл бұрын
I moved it under it
@P222RL
@P222RL Жыл бұрын
the antenna will then be blocked by the battery at the front when you flying towards you, i have bad RSSI readings when i installed here, so i move in the battery compartment and antenna locate near the face of the pilot
@iramiller2389
@iramiller2389 2 жыл бұрын
I just hooked up a Spektrum AR620 6ch receiver to the black box using the supplied wiring. I unscrewed the black box to make it easier and noticed on the underside that one red and black 2 wire connector wasn't plugged into anything. I checked and it appears that all the servo, esc and light wiring is plugged in correctly other than this one red and black 2 wire. Since its a 2 wire, I assume its either a light or brake wire and since the light wires are plugged in it must be for the optional brakes since nothing is plugged into the brake pins?
@kjb7229
@kjb7229 Жыл бұрын
I noticed the same thing. My black/red wire disappears into the left side of the wire harness. I don't think it's for the brakes because both the "Brake Out" and the "Brake In" connectors have nothing plugged in and the "Brake In" connector is a 3 wire. Manual is no help. It would be great if someone could answer this.
@jordandoell
@jordandoell 3 жыл бұрын
Does it come with the little servo extensions to go from the control box to that receiver?
@MerryBoozerRC
@MerryBoozerRC 3 жыл бұрын
Yes it does 😌
@twincitymoo7141
@twincitymoo7141 3 жыл бұрын
Good video, but can you do a video showing you adjusting the gains for each control surface while flying a plane? Show the plane oscillating and correcting it during flight for each control surface.
@jpap1059
@jpap1059 2 жыл бұрын
Did the preset gains work out for you or did you find you had to adjust them? I’m getting this plane and it will be the first time I ever set up Spektrum receiver. I’m just a little nervous about gains and making sure that I have them set correctly.
@MerryBoozerRC
@MerryBoozerRC 2 жыл бұрын
All honesty I never have turned the gyro on the airplane flys so nice without it I just haven’t felt the need to use it yet. But you can assign the gain to your roller knob if you have one and make adjustments in flight if you need less or more.
@kazama6245
@kazama6245 2 жыл бұрын
I think a good velcro will work.
@boss2234
@boss2234 2 жыл бұрын
Wes do you know what the problem could be I have a flashing red light on the control box but I have no ailerons or rudders or any control surfaces working at all once I bind receiver. Driving me nuts I have looked over everything can see nothin wrong. Using AR 631. Any advice 🤔🤔🤔
@boxster99A
@boxster99A 2 жыл бұрын
I have the same problem. Did you come up with a solution?
@TheBrowLineTrolley
@TheBrowLineTrolley 2 жыл бұрын
This is more complicated than my previous projects. Wondering if I can bind the radio and move the servos with just the 2cell battery connected and not the 6cell. Julian
@TheBrowLineTrolley
@TheBrowLineTrolley 2 жыл бұрын
Yes
@MerryBoozerRC
@MerryBoozerRC 2 жыл бұрын
Yep that works fine the only time you need the 6s is when you want to run the motor
@TheBrowLineTrolley
@TheBrowLineTrolley 2 жыл бұрын
@@MerryBoozerRC Thank you very much. Right now I have the red light blinking on the control box but no servo movement. Julian
@BitgoHobby
@BitgoHobby 3 жыл бұрын
Nice video bro! I know someone who could have used this a few nights ago. Lol
@MerryBoozerRC
@MerryBoozerRC 3 жыл бұрын
Haha 😂 mines not as fancy as some just a quick down and dirty lol
@rcrotorfreak
@rcrotorfreak 2 жыл бұрын
What a beautiful aircraft. What I love using to glue receiver to receiver or so forth is using hot glue gun with gorilla glue stick for hot glue gun. Tough to remove also. Sticks good. :) Or 3m permenent double sided tape from auto store. Do you have a flying video of this aircraft?
@user-fv6vy6rm6f
@user-fv6vy6rm6f 2 ай бұрын
Are these airplanes no longer available to buy? I would really like to have one.
@mikepaine527
@mikepaine527 3 жыл бұрын
I have a similar plane but I have separate channels for right elevator , left elevator right alerion and left alerion will the receiver work with this configuration
@MerryBoozerRC
@MerryBoozerRC 3 жыл бұрын
No you will need more channels if you can’t Y them together it’s only 6 channel.
@mikepaine527
@mikepaine527 3 жыл бұрын
1 for throttle 2 alerion 2 elevator 1 rudder that is only 6 right now I’m using a ar620 6 channel I’m just wondering if the stability will work with it connected this way
@MerryBoozerRC
@MerryBoozerRC 3 жыл бұрын
@@mikepaine527 sorry I understand now yes it will work you must set up your wing type and tail type first and make sure everything is working correctly then the gyro sets up exactly the same
@jessharris2708
@jessharris2708 2 жыл бұрын
So wes when you gonna do the safe setup?
@tommycash7811
@tommycash7811 3 жыл бұрын
please go ahead wirh the nx Radios , would be interesting to see how to forward progaming
@TheBrowLineTrolley
@TheBrowLineTrolley 2 жыл бұрын
I have connected the same receiver, gone through the bind process and get a slow blinking light on the power box but no servo control. I think I have seen this in other comments. Is there a solution?
@MerryBoozerRC
@MerryBoozerRC 2 жыл бұрын
Not 100% sure if you followed the video and it’s not working you should contact Andy over at HSD
@boxster99A
@boxster99A 2 жыл бұрын
I have the same issue. Have you received a solution?
@TheBrowLineTrolley
@TheBrowLineTrolley 2 жыл бұрын
@@boxster99A I have not got this working. I recently had hand surgery. Someone at HSDJETS should be able to give us an answer.
@boxster99A
@boxster99A 2 жыл бұрын
Solution for me was I had expected the servos to move as soon as I plugged in power. Turned out I needed to go ahead and bind the aircraft to my transmitter despite the flashing red light. Then it worked as per Boozer's video. HSDJETS confirmed that bin a text to me.
@joshellis8063
@joshellis8063 Жыл бұрын
They don’t use silicone to glue the receiver Down they use double sided tape
@janpayne964
@janpayne964 3 жыл бұрын
I got 4 extensions with mine...is there supposed to be 5? How does the throttle hook up?
@janpayne964
@janpayne964 3 жыл бұрын
I figured it out...there are 2 cables plugged into s-bus ports on the mfc that are tucked into the body but not hooked up...they can be used to make rx connections
@MerryBoozerRC
@MerryBoozerRC 3 жыл бұрын
@@janpayne964 yep you got it ☺️
@onapproachrc5471
@onapproachrc5471 3 жыл бұрын
Hey Wes does that work the same way on my DX 8 ?
@MerryBoozerRC
@MerryBoozerRC 3 жыл бұрын
Yep 👍 as long as you have the latest update
@janpayne964
@janpayne964 3 жыл бұрын
Could Velcro be used to hold the receiver?
@MerryBoozerRC
@MerryBoozerRC 3 жыл бұрын
Not one with a gyro. It is critical that the receiver doesn’t move in flight or it will crash the airplane
@Dg-zj6jo
@Dg-zj6jo 2 жыл бұрын
nx 8 have you done yet sir please
@SM-yr9kb
@SM-yr9kb 3 жыл бұрын
it looks so easy to setup. Why Spektrum have 14 videos steps on KZfaq to explain that (except for the SAFE)?
@MerryBoozerRC
@MerryBoozerRC 3 жыл бұрын
Yep I haven’t done safe yet as I don’t use it but it is definitely the easiest gyro to get set up
@nled
@nled 3 жыл бұрын
Informative video. Any chance you will put the brakes on it?
@MerryBoozerRC
@MerryBoozerRC 3 жыл бұрын
Probably not there really not needed
@mikeballew6300
@mikeballew6300 3 жыл бұрын
AR637T Receiver In The HDSJETS-182 I love this plane from HSDJETS I HAVE IT AND I HAVE THE HSDJETS HME-262 HSDJETS , HSDJETS t-33 HSDJETS super viper v4 I like the full Telemetry on all my planes and im a big fan of spektrum on my HDSJETS-182 i did the same as marry boozer RC i use a BNF out of a EFLITE P51 Mustang i use the AR637TA and reset the receiver with the update file to facturey default in order to get full Telemetry i use the Spektrum Avian smart 100amp ESC This ESC have the BEC BIG WARRING the built in MFC board is built in BEC i had to use the power wire from the spektrum ESC to the Throttle of the AR637TA Warring i had to cut all the red wires in the PWM wires from the HSDJETS MFC board and only let the Spektrum ESC power the receiver and the HSD MFC board power the servos and led's only the receiver is power from the Spektrum ESC my HSDJETS HME-262 HSDJETS is the dual 90mm EDF I use 2 spektrum 100 amp ESC and cut all the Power were the red wire only i can see both ESC'S on my spektrum radio and i see both flight batters on my radio i just can't see the 2s batterys that power the HSDJUTS MFC board
@ryanhawks6600
@ryanhawks6600 3 жыл бұрын
Cheap Silicone Caulk > Flooring Adhesive.
@MerryBoozerRC
@MerryBoozerRC 3 жыл бұрын
Yep that would also work I just like the old bathroom caulk seems I work great
@ryanhawks6600
@ryanhawks6600 3 жыл бұрын
Love your channel man. I check almost daily to see what content you posted. Keep up the great work dude!!!
@charlesrestivo870
@charlesrestivo870 3 жыл бұрын
Should use tape on reciever then silicon
@MerryBoozerRC
@MerryBoozerRC 3 жыл бұрын
Nope tape can fall off and you never want a gyro loose in flight it will crash a plane
@charlesrestivo870
@charlesrestivo870 3 жыл бұрын
@@MerryBoozerRC nono scotch tape whatever been using home silicon with tape Which trust me just makes it a bit easier just short of impossible.But hey everyone has their ways .nice video short and concise
Setting up AS3X and SAFE with Forward Programing-AR631-AR630  by FGFRC
22:08
ЧУТЬ НЕ УТОНУЛ #shorts
00:27
Паша Осадчий
Рет қаралды 10 МЛН
Summer shower by Secret Vlog
00:17
Secret Vlog
Рет қаралды 13 МЛН
Spektrum NX10 setup with the AR637T
18:15
LAPEOS Sunrise RC Aviator
Рет қаралды 22 М.
Spektrum Smart Telemetry Explained and Demonstrated
8:51
Matthew Heiskell
Рет қаралды 59 М.
Spektrum AR10360T 10 Channel AS3X & SAFE Receiver Overview
12:25
The RC Air Marshall
Рет қаралды 6 М.
Damascus Steel From Milling Chips!
15:47
Alec Steele
Рет қаралды 1,2 МЛН
HSDJETS 182 from HSDJETSUSA.COM Behind The Scenes/Full Flight
12:45
Pilot Ryan Media
Рет қаралды 21 М.
How to UNLOCK your Spektrum AR637TA / AR630 / AR631
13:17
SpektrumRC
Рет қаралды 88 М.
Spektrum AR Receiver: Which receiver is right for you?
4:12
BD Tennessee
Рет қаралды 35 М.
Spektrum AR637T - Installation and setup with DX8
14:31
LAPEOS Sunrise RC Aviator
Рет қаралды 25 М.
Inside the B-17 Ball Turret
18:59
Blue Paw Print
Рет қаралды 2,4 МЛН
Stay on your way 🛤️✨
0:34
A4
Рет қаралды 24 МЛН
ПИЩЕВОЙ ВАНДАЛ НАКАЗАН
0:20
МАКАРОН
Рет қаралды 2,9 МЛН
Утро начинается не с кофе
0:41
Онлайн-кинотеатр PREMIER
Рет қаралды 3,7 МЛН
Why Is He Unhappy…?
0:26
Alan Chikin Chow
Рет қаралды 56 МЛН
Фильм про побег от родителей
0:59
Holy Baam
Рет қаралды 3,7 МЛН