Thanks Robert

I’m impressed with Pathfinder’s quality and engineering. I installed their multifunction blade that attaches to the trunk without a rack. As part of that, I installed the Pathfinder connectors that plug-n-play into the left and right harnesses under the seat on my 2018 Tour. Nice video and the shoutout to Cruiseman. His videos have helped me too!

Wish you always happy and cheerful

For the center stand, I've found your best bet is to start with the bike on the side stand. Gently step on the center stand with your right foot and start to stand the bike up. You'll feel exactly when the bike is on both feet of the stand, but you can rock it gently back and forth to get a better feel. Once you have both sides of the center stand down put all your weight on your right foot, your left is off the ground. You should not need much muscle to lift the bike up at that point. If you give it too much the bike will fly up on the stand and skid backwards!

Looking forward to seeing the accessories you add to that beauty!

The Lady bug is liking the video too.

I have the same kind of nylon pins on my cbf 1000. When i work on my bike i always put some silicon grease on them wich makes very easy to pull out the next time.

Concise and easy to follow, thank you. Watching closely as will be able to reference when taking mine apart. Cheers from over the pond!

Suggest getting Traxxion Dynamics replacement seat bolts. Excellent accessory.

The audio and video quality on how to install the pathfinder on the Honda Goldwing was very good.

Just a quick suggestion. You may want to pick up a JIS (Japanese industrial standard) #2 screw driver. Looks like a Phillips #2 but sits in the numerous screws on this bike much better than the standard Philips screw driver. You were fortunate to get that accessory screw out of the fuse panel without stripping the screw. I wasn’t so fortunate. Nonetheless, the JIS driver was able to even get the stripped screw out. 😐

I done the same thing to my bike last week!

Nice job Glad to see this went well I have been watching cruiseman as well Nice to see that an average guy can do some of these installations Waiting for the weather to stop dumping snow in WI so I can bring my new to me 2021 wing home from the dealer

There are too many parts to the bolts removing the seat, including the plastic bushings. My bolt set was not complete on delivery of my new DCT Tourer. I reckon like everything these days, the folks that assembled the bike did not pay attention or flat didn’t care. I didn’t realize it for some time, but did notice taking the seat off for the first time, things were missing. I found a 1 piece bolt assembly from Max at Traxxion dynamics. They were approximately $30 with the shipping if memory is correct. It was $ well spent as it is so easy to assemble the seat now. It’s a beautiful Goldwing. I’ve had my DCT Tourer for 5 years and other than battery and tires, normal stuff, no issues. Enjoy the motorcycle, it will give you many smiles and very dependable

Ok good

Can you please redo this video. I couldn’t concentrate with your ladybug friend going all over the place. 😂😂😂

Did you plug the accessory hub into you heated seat connectors? If so, what do you do if you have the non-tour DCT without the heated seat? Thanks,

What is the part number for the power hub kit you used and did the harness come with the kit?

Good job! What accessories you thinking about? Thanks

Solid video for the installation of the Pathfinderled Power hub. My question is, how can you now install your previous purchase of the Kisan Tailblazer???? They both use the same type of dual connectors on the right & left under the seat, don't they??? Seems incompatible to me.

Looks like it would be a bit tight getting the seat back on with that box under there but you obviously did it. Just my pessimistic nature. 😅

The title read “installing the pathfinder hub’ yet the video opened with the floor being swept. Naw Bruh don’t have that kinda time.