Рет қаралды 8,589
The SpiroCombi MB3 from Spirotech is designed to simultaneously remove air and dirt from heating systems, in order to improve performance. It’s highly recommended that you use a SpiroCombi MB3 as a deaerator and dirt separator in your heating systems.
In this video, we run through how to install the SpiroCombi MB3.
The benefits of the UC (MB3) SpiroCombi deaerator and dirt separator
Combined separation system that removes circulating air and microbubbles effectively
Including a magnet for extra protection and high efficient removal of magnetite
Very small particles, from 5 μm (= 0.005 mm), are separated and removed
Dirt can be discharged while the system is in operation
No shut-off valves or bypass required
Improve cost control and energy efficiency
What is a deaerator?
We heavily rely on our heating systems for hot water and heating demands, which is why it’s important to maintain the efficiency and reliability of these systems. We believe that the most important component in your system is the water. If you allow the quality of the water in the system to drop then the efficiency of the system will also deteriorate.
A deaerator will generally be fitted on the flow pipe coming out of the boiler, this helps stop air or oxygen entering your system. The dirt separator will generally be fitted on the return pipework to protect the most expensive component, the boiler and any components after.
* Visit our website: www.spirotech.co.uk
* Deaerators: www.spirotech.co.uk/solutions...
* Dirt Separators: www.spirotech.co.uk/solutions...
* Product Catalogue: spirotech.ma.informationstore...
* Follow us on Twitter: / spirotechuk
* Follow us on LinkedIn: / spirotechuk
* Contact us: www.spirotech.co.uk/contact-us/