Integra GSR Skunk2 Intake Manifold INSTALL | PART 1
Рет қаралды 11,464
Жыл бұрынPart one of the Skunk2 intake manifold install on my 1994 Acura Integra GSR. Stay tuned for part two and more videos on my Integra GSR!
Be sure to check out PART 2 of the install: Integra GSR Skunk2 Intake Manifold INSTALL | PART 2
• Integra GSR Skunk2 Int...
***Amazon link***:
Skunk2 Intake manifold for GSR: amzn.to/48eRDYn
Skunk2 Throttle body: amzn.to/4aHTx5c
Thanks for watching!
Follow me on Instagram @spencers_garage
@thepizzaboy7297 Жыл бұрын
Torque to spec on all things love it. Very nice car and work done.
@smokeyxdaxbear97 Жыл бұрын
Great job. Will be using this as reference, currently doing a resto-mod on a 98 LS
@SketchyAtBest Жыл бұрын
Im not really a honda guy so I dont know why this was recommended, but nice work. Amazing editing/production quality for a growing channel.
@spencersgarage Жыл бұрын
Thanks, appreciate it!
@Cruciada_888 2 ай бұрын
Good Video 👍👍👍👍👍
@stetson1503 Жыл бұрын
Skunk2. Dude!
@jorgeproano4408 10 ай бұрын
What is the length size for the studs for the intake manifold?
@marvinreyes6270 7 ай бұрын
Hi can you advice to me if i use wiseco piston 6567m84 b20b block itr head
@NTpowerful 11 сағат бұрын
That type r bracket and throttle cable is needed?
@marvinreyes6270 Жыл бұрын
Which is power ang fast gsr b18c or b16a engine
@anthonyfrausto6694 Жыл бұрын
So u looped the tb ports?
@JohnnieIsBored 9 ай бұрын
What’s the purpose of bypassing the hose?
@Ehs-fn1zr Жыл бұрын
Bro just guide me I have skunk2 racing tb there is no water outlet at lower side of tb. Now where can I connect my IACV lines to tb. Thank u.
@franciscotorres6448 Жыл бұрын
After watching this video, now I’m tempted of doing it my self on my GSR. I have been wanting a skunk2 manifold for ever. Is there a part coming?
@spencersgarage Жыл бұрын
Part two will be coming out next!
@franciscotorres6448 Жыл бұрын
@@spencersgarage all be waiting! I appreciate it!
@Hondacrxdelsol33 Жыл бұрын
Why rerouting the iacv water hoses? For let the temperature be cooler on the tb?
@spencersgarage Жыл бұрын
So extremely hot coolant does not heat up my throttle body. Cooler air = more power.
@civicstar982 Жыл бұрын
What are you doing with the evap purge solenoid? That bolts to the top of the gsr intake manifold. I was thinking of running a b16 fuel rail since it has a mount for it already 🤷🏾♂️
@spencersgarage Жыл бұрын
I deleted that thing years ago. The Rywire engine harness doesn’t even have a plug for it…
@civicstar982 Жыл бұрын
@@spencersgarage 😭
@mahp3039 2 ай бұрын
What length were those intake manifold studs? Were they the extended so you can fit thermal gasket on? And can I use my OEM gsr throttle body?
@spencersgarage 2 ай бұрын
Hi, 55mm studs will work. You can use the OEM TB but the port won’t match the manifold. At least a 66mm TB would be good.
@mahp3039 2 ай бұрын
@@spencersgarage That means I have to get a tune if I run 66mm throttle body? My intake manifold gasket went out on me so I was like I’ll just a skunk 2 one. I don’t want to Hondata and tune I’m on budget. But if I have too I will.
@jamessullivan4979 Жыл бұрын
I’m like there better be a part 2! I didn’t see if you put the tps sensor on that’s usually riveted on the back side of the throttle body and is a pain to put in when everything is installed already
@spencersgarage Жыл бұрын
Yes, there will be a part two! After the part two install video I will have a whole other video on how to calibrate the TPS.
@jamessullivan4979 Жыл бұрын
@@spencersgarage and it won’t be new parts but I’d love to have you torque all my stuff to spec. Anything outside the engine im like it feels tight 😆
@oscardlr4284 Жыл бұрын
Do u have to tune the car when u get new intake manifold .?
@spencersgarage Жыл бұрын
Yes. The Integra GSR ECU “P72”, will not operate correctly with the new manifold not having the secondary butterflies like in the OEM GSR manifold.
@jacoballen5259 Жыл бұрын
on 17:52 what if i don’t have both of those only the one on the manifold?
@jacoballen5259 Жыл бұрын
what do i do
@eddiecaldas9711 10 ай бұрын
Where did you purchase the iac ?! Please sense the link or where I can purchase please and thank you 🤝🏽
@spencersgarage 10 ай бұрын
Offer up app, someone had a brand new OEM in original packaging. It’s discontinued from Honda.
@jimbeatty6680 7 ай бұрын
how did you remove the bolts from the head?
@josh48143 6 ай бұрын
The same method that he used to take the studs out of the manifold in this video. Two nut method
@JohnnieIsBored 8 ай бұрын
Would you recommend that manifold setup on a stock motor and ecu?
@spencersgarage 8 ай бұрын
No. The ECU has to be retuned.
@JohnnieIsBored 8 ай бұрын
What ecu would you recommend? Good thing I didn’t install it yet.
@spencersgarage 8 ай бұрын
@@JohnnieIsBored Hondata S300
@JohnnieIsBored 6 ай бұрын
@@spencersgaragewhich version s300 and what type of ecu? USDM OR JDM?
REALSTREETPERFORMANCE
Рет қаралды 24 М.
Nikita Zdradovskiy
Рет қаралды 7 МЛН
bvspeed
Рет қаралды 21 М.
Bo Builds
Рет қаралды 170 М.
Ăn Vặt Tuổi Thơ 2024
Рет қаралды 18 МЛН