Intercooler and Piping Removal and Cleaning

Intercooler and Piping Removal and Cleaning - Hyundai Accent

Рет қаралды 21,615

2 жыл бұрын

It is important to clean the intercooler and piping as maintenance because these are exposed to oil, dirt, and air which could accumulate and clog overtime. Having a clean system retains an efficient performance.
- hyundai
- intercooler
Video Links:
Air Intake Box Assembly Removal:
• Air Intake Box Assembl...
Intake Manifold removal, cleaning and reinstallation:
Part 1:
• Intake Manifold Remova...
Part 2:
• Intake Manifold Cleani...
Condenser Cleaning:
• Condenser Cleaning - H...
"PLAYLIST" Hyundai Accent EGR and Intake System Comprehensive Maintenance:
• Hyundai Accent EGR and...
Car used for demonstration: 2017 Hyundai Accent Hatchback CRDi
Applicable for the following models:
Hyundai:
- Verna
- Solaris (Russia)
- i25 Accent (Colombia, Israel)
- Grand Avega (Hatchback, Indonesia)
- Excel III (Sedan, Indonesia)
- Grand Pony (Sedan, Colombia)
Dodge Attitude (Mexico)
BGM:
KZfaq Audio Library
Nite Foul - Noir Et Blanc Vie
Thank you very much and God Bless.
#andredraftproject #hyundai #accent #crdi #intercooler #silicone #apexi #hks #blowoffvalve

Пікірлер: 34

@jonatanaltidormoreno9491 9 ай бұрын

Very interesting and informative video. What I like the most is that you seem careful and delicate with those fine parts, specially in the intercooler and you use the correct product to clean either the electrical connections or for the engine cleaning product, degreaser and everything. I should try that on my Volvo c30. Thank you.

@DraftProject 8 ай бұрын

I really appreciate your comment. Thank you very much!

@johnmethew95 Жыл бұрын

very good information, keep continue to make this kind of videos.

@DraftProject Жыл бұрын

Will do. Thank you very much.

@steveorules3972 Жыл бұрын

So much for environmental precautions..

@DraftProject Жыл бұрын

Really sorry about that. Will do better next time.

@MotoDoki Жыл бұрын

Sir, ano feedback mo sa BOV? Ok ba ?

@ullashraj8860 Жыл бұрын

Can you please let me know , where to get this custom intercooler , i own a 1.6 crdi verna too

@DraftProject Жыл бұрын

Unfortunately, I don't have that much info about this intercooler since the vehicle wasn't mine in the first place. Here is what I know about the intercooler. Brand: Apexi Inlet: 2.5 inches Outlet: 2.5 inches As far as I know, the owner bought it in a local tuning shop. I hope this helps. If I ever found the same type of intercooler on the internet, I will comment again here. Thanks and take care!

@turkiyem8225 Жыл бұрын

Good luck with hyundai accent blue vehicle Do you have a presser pad video can you help me I want to make it myself. I'll just take pictures of disassembly

@DraftProject Жыл бұрын

Thank you very much! May I ask if the presser pad refers to the brake pads of the vehicle?

@turkiyem8225 Жыл бұрын

@@DraftProject My vehicle's engine speed accelerates very well, but its agility has decreased. I need a detailed assembly video of the gearbox and pressure pad. I can remove all of the wheel shock absorber lower wishbone

@DraftProject Жыл бұрын

I see but unfortunately, I'm sorry to tell that I don't have a video for that. If I get the opportunity, I may have done it. Sorry for that. Thank you for your support.

@drickph3066 Жыл бұрын

Ano Maya name ng intercooler plan ko mag diy

@nostraware 2 жыл бұрын

Is the blow off valve a stock one?

@DraftProject Жыл бұрын

Nope. It is an aftermarket BOV.

@DanielSantos-lb3mw 2 жыл бұрын

Is it natural to have oil drippings from the turbo intercooler?

@DraftProject 2 жыл бұрын

Yes. In the intercooler, oil tends to accumulate because most of the time, oil cannot escape inside the intercooler. One of the reasons why they needed to be cleaned at a specific period. If there is too much oil in the piping, that could indicate a worn out seal of a turbo.

@DanielSantos-lb3mw 2 жыл бұрын

@@DraftProject what is the best thing to do?

@DraftProject 2 жыл бұрын

Given the situation is pretty normal, it is best to maintain it's periodic maintenance like cleaning the intercooler, intake and EGR to prevent any buildup of oil and carbon deposits.

@DanielSantos-lb3mw 2 жыл бұрын

@@DraftProject if the turbo seals or bushings are worn out that causes the oil leak.. it can be replaced? or I need to buy a new turbo?

@DraftProject 2 жыл бұрын

Leaking turbo can be fixed by replacing the seal inside. It is like a piston ring fitted on both sides of the shaft of the turbine. Others sell a repair kit for it.

@kens.2409 Жыл бұрын

That's a lot of solvent running all over the ground and ending up who knows where or in the ground water supply. Why not use a large container?

@DraftProject Жыл бұрын

Sorry for that. Yeah, I will take that advice.

@nostraware 2 жыл бұрын

How about the turbo itself? Shouldn't also need to be cleaned? Also judging by your accent, are you from PH? By 'accent' I mean the word accent, not the car 😂

@DraftProject Жыл бұрын

Nope. The turbo is only cleaned when it needs to be rebuilt. Other than that, nothing to worry about. Yeah hahaha you got it. Thanks!

@nostraware Жыл бұрын

@@DraftProject this is definitely good to know. Thank you!

@DraftProject Жыл бұрын

@@nostraware You're welcome! Thank you too!

@sphinx5101 4 ай бұрын

Diesel has oil in it why use that to clean

@DraftProject 4 ай бұрын

Diesel is a good cleaner and remover of oil sludge. One of the ways to remove grease or sludge is to use oil too. Once it dries, it won't leave that much residue.