Interior Overhaul with Custom Sheet Metal & Fab Work | 1954 International Metro

Interior Overhaul with Custom Sheet Metal & Fab Work | 1954 International Metro | Turnin Rust

Рет қаралды 186,265

4 жыл бұрын

Join Lance & Wyatt as they tackle the interior on the 1954 international metro, creating custom wheel tubs & raised floor. While trying to preserve the patina inside the metro, Lance recreates the faux patina paint finish to match the existing look inside the van.
►Products Used in this video:
Modern Masters Iron Paint (Rust) - amzn.to/31I4teY
Modern Masters Rust Activator - amzn.to/2Zd85E2
3-1 Metal Brake - amzn.to/2H6N6N9
Shrinker Stretcher - amzn.to/2Hq1ZdJ
**SUPPORT TURNIN RUST:
►Patreon - / turninrust
►Merch: shop.turninrust.com
**SOCIAL MEDIA:
► Subscribe to us on KZfaq:
kzfaq.info?su...
► Instagram: / turninrust
► Twitter: / turninrust
►Website: www.turninrust.com
**SEND US FAN MAIL!!
Turnin Rust
P.O Box 865, Bogata Tx, 75417

Пікірлер: 134

@MAXMUSTERMANN-pv4in 4 жыл бұрын

Ihr seid die BESTEN !!!!! Absolut SPITZENKLASSE !!! Ganz liebe Grüße aus Deutschland / Hessen !!!!!!

@williamlott7612 4 жыл бұрын

Brothers, I find I refreshing to watch a video without a bunch of profanity, thanks a bunch and God bless.

@jesuslovesyou1881 4 жыл бұрын

Yes exactly true , very good said

@syednazim8254 4 жыл бұрын

I really love you dad for following the instructions of your son so obediently

@erickrocket 3 жыл бұрын

Hahaha

@jesseblancas9501 Жыл бұрын

I liked that you showed how you shaped the angle iron with the “Shrinker/Stretcher”. I observed though that you both were working on the floor while doing the fitting. I think that I saw a folding table in the background. When I work on my DIY projects, I try to raise my work whenever possible. That saves my back and legs.

@stillperfectgenerations5852 4 жыл бұрын

I really dig the mutual respect from you guys. Great to see Family still means something today...

@oldeharbinger 4 жыл бұрын

Man, I would LOVE to have one of those as a handicap van. I wish I could afford a bagged Metro. Lower it down, drive my power chair in, raise it up and go. That would be awesome!

@MrPlowboy27 11 ай бұрын

Wyatt Earp is one cool dude “and that “ 😊

@arussianasset3948 4 жыл бұрын

Two saw horses, a couple of two by sixes, and a sheet of plywood; wa!la! work bench.

@otispeshlakai9303 Жыл бұрын

Much respect to you all, awesome builds,, you just worry me cutting with that angle grinder with no full face shield. I had a cutting wheel break on me one time, thank goodness I had full shield. Anyways I just thought I share, keep up the good work.

@rayrieland4251 4 жыл бұрын

Great work on the Metro love how she's shaping up can't wait to see the finished product it'll be a beaut I'm sure. Glad to see some new vids!

@steverice5608 6 ай бұрын

Beautiful job!

@MAXMUSTERMANN-pv4in 4 жыл бұрын

Hello dear friends !!! I am always speechless ,when I watch your movies !! You are the best!!! Absolutely top class like you do with the Finisch !!!! You are the best!!!! Greetings from Germany !!! :-)

@orlandopadilla8304 4 жыл бұрын

That would look awesome in copper. All your great work with the sheet metal in copper.

@daleolson7205 4 жыл бұрын

Work benches would be a good thing.

@farmerbrown3768 4 жыл бұрын

Dale Olson .....I agree wholeheartedly! My old knees would be screaming after all of that.

@crankysports 4 жыл бұрын

oooh I want to see more of that red jeep in the background!!the finished product on the van is awesome! Looks amazing!

@kennethmartin9081 4 жыл бұрын

That's a pretty good job

@NialPowerCork 4 жыл бұрын

Great job on matching in the newly fabricated sections with the existing, very artistic. Very good fabrication works with basic tooling, takes good basic skills to do that. I’d be interested to have seen how you managed the interface with the outside of the wheel tubs with the van bodywork and also how you sealed it and the seams inside (as in underneath) the wheel rubs. That looks like a nice warm dry climate you are in there, if that’s the van that’s going to Ireland then rust protection is a big issue. Any underside cracks or seams will tend to rust, I know it wouldn’t be a daily driver but even so. Very inventive guys and a nice family dynamic there, pleasant to see.

@crankysports 4 жыл бұрын

I was thinking primering allll the bare metal, and heavy coats of paint before any wood flooring would have been better.

@martinharris5017 4 жыл бұрын

Love the old school methods you guys use. I can really relate to the cardboard template method! Built my C Cab rod body using lots of cardboard templates and marker pen! Really impressive final result guys. Fits the character of the Metro perfectly.

@Jeff-1969 4 жыл бұрын

Great episode Lance, 😉👍 Good to see the photographer/ cinematographer in the intro. He doesn't get enough credit for his work. 😎 👍

@henryg683 4 жыл бұрын

Nice to see how well you two work so great together wishing I could work with my son like you do with your dad

@knottreel 4 жыл бұрын

Absolutely beautiful match with the patina. I was just thinking that some old boy will come along and decides it needs a nice fresh coat of white paint.

@alanmooney3120 4 жыл бұрын

This is some damn fine fabrication, and "Rustin'"...:)

@randylogan3801 4 жыл бұрын

I was coming on here to say same thing u fellers need work bench bad on knees up and down but darn good work guys god bless

@hermyherm365 4 жыл бұрын

I am impressed! Awesome work guys !! Love this channel

@jennifersmith7922 4 жыл бұрын

I'm glad you finally had a video on here it's been a long time I missed you on here

@griffincurrie6993 4 жыл бұрын

Finally you guys got a video

@tobecontunedusa7527 4 жыл бұрын

Awesome job.

@josephpilosky9447 4 жыл бұрын

Great job learned a lot ! Been waiting a long time to see something from you guys keep it up can't wait to see if finished👍👍

@sethleeseberg446 4 жыл бұрын

Cool!! They still making videos.

@martindaredare 4 жыл бұрын

Outstanding work

@fred6308 4 жыл бұрын

I really like that y'all explain what your doing and why..makes me think I could buy the equipment and recondition my truck..

@rafatrill 4 жыл бұрын

Amazing work, great job guys love the channel keep up the good work, god bless yall!!!

@chrisegger5380 4 жыл бұрын

Great jobs guys. I love it

@dakota4695 4 жыл бұрын

Great as always💪

@jennifer.juniper4845 4 жыл бұрын

Excellent video and great progress

@paulmullins4439 4 жыл бұрын

Great video enjoyed watching u all keep up the great work

@armandopatane5343 4 жыл бұрын

Your work is incredible love the channel/ can’t stop watching

@dudestoneking 4 жыл бұрын

Yes! been missin you guys!

@jackasmaryan1776 4 жыл бұрын

You're an artist brother that was amazing

@Zero14u 4 жыл бұрын

You need a show on like motortrend, you guys rule!!

@johnnybravo3869 4 жыл бұрын

Looking good, gents!

@jayd8774 4 жыл бұрын

Nice job gents! Love the finished product on the Metro. d8-)

@shanewright6958 4 жыл бұрын

Another great video 👍

@808v1 4 жыл бұрын

I would love to have that truck or a similar Metro, really nice work!

@superbmediacontentcreator 4 жыл бұрын

Gosh, I wish I could have something as special as this Metro...

@ahmedal-prince6438 4 жыл бұрын

woooooooooow goooooood

@study650 4 жыл бұрын

What a great job. You do make me a little nervous, handling that sheet metal with your bare hands. It'll cut you in a heartbeat.

@tracywraley6892 4 жыл бұрын

Now that you have the wood looking how you want it if you add a flat clear polyurethane it will keep the aged look and be protected the metro looks amazing

@richardweaver9682 4 жыл бұрын

It would be interesting to ask the original manufacturer what they think about turning a basic utility vehivle into a piece of rolling artwork. Interesting videos on the channel so far. I like the step by step part of them vs shows like Gas Monkey where you go from wreack to jewel in one 45 min episode.

@markschnell 4 жыл бұрын

Maybe think about purchasing a beader to put a few beads on the flat surfaces. It will stiffen them up and prevent any oil-canning sounds. Good work, though!

@tkskagen 4 жыл бұрын

That is the OH Cab Body that I would have chosen as well! It's all about AERODYNAMICS! Take care guy's!, 🤓 -Thomas Western Washington State

@malikdigger4544 4 жыл бұрын

22:34 Think you may needit a welder chair or something to set on while welding. 44:17 that looks amazing how did with interior fender welds fit together perfectly u guys@ Turnin Rust are awesome fabricators.

@leescanlon214 4 жыл бұрын

Slick!

@jamesgilliam6615 4 жыл бұрын

Dude I just found your channel I'm excited to see the end result you guy do exceptional work good stuff

@dalehaaland5850 4 жыл бұрын

You guys do amazing work. I love the details of how you do the the work and how simple you keep the process. Keep up the great work and Praise Jesus!!!

@red93yj 4 жыл бұрын

yall good!!!

@NerdInMotion23 4 жыл бұрын

Next brewery van!!!!

@Rollingcoalsmaxs07 4 жыл бұрын

I can say. I love your build I have the same taste in want to open up my own rat rod custom shop and I love your Chevy truck look sick with the aggressive stance. Except in need air bags to help it from squatting

@tomekc1113 4 жыл бұрын

God bless :) I pray all the best for you

@arussianasset3948 4 жыл бұрын

Where have you guys been? I had all but given up on seeing any more vids.

@davidhobbins3636 4 жыл бұрын

That's turnin' out wheely well! Too bad Lance had to sell his beard to pay for another rusty ride. 😎

@carlosquintana6930 4 жыл бұрын

I like your ideas but you should get like a work bench so you don’t have to work in the floor.👍👍

@jeffreyc6508 4 жыл бұрын

I notice that too My guess is maybe they are trying to get hooked up with some FREE stuff!!

@ImTheJoker4u 4 жыл бұрын

I guess I should have read the comments before I commented the exact same thing.

@arussianasset3948 4 жыл бұрын

@ Carlos Quintana Even in the bed of a truck would be better than on the floor.

@sarahwatson7692 4 жыл бұрын

Carlos Quintana When I went to work in the boiler industry I encountered almost everyone groveling on the floor while taking things apart or assembling them. Personally I consider this a sign of “just get it done” mentality and sloppy work. I made a three by six table with removable legs and brought it to the job site along with a small vise. Suddenly I’m a genius and even the other trades tried to use “our” workbench! All my coworkers remarked how much easier the work table made things! But none of them would make one on their own.

@maxm7462 4 жыл бұрын

Came here just to say that. It annoyed me to an insane level.

@errorsk2188 4 жыл бұрын

other dudes : gotta mak it brand new ! these dudes : now i am aplying some patina... awesome haha XD

@tobifayiga3628 4 жыл бұрын

They should fix one of the old Dodge brothers truck from the 1930s

@tysonthewolfe93 4 жыл бұрын

Hell yes they should do it next

@jasongonzalez400 4 жыл бұрын

Oh yeah

@White-Head 4 жыл бұрын

Where did you find shrinker / stretcher at? I need one of those. Great tool

@sovereignfreespirit 4 жыл бұрын

Hey great show guys, keep up the good work. I think when your working on stuff like hooking up fuel lines to make the engine run you should have done that stuff off set, and had it previously setup, then rite after you tell us what your gonna do, pause then feed us something else to look at like maybe something from your sponsor, then when you come back, show us the fire up.. by the way where is the big reveal? we wanna see the customer get his metro and the effect and happiness.. come on? you gotta show us the finally.. PS I'll send you a contact, I have a Guy up here makes some really nice old school rims would look great on these metros and old school builds..

@BrianSmart1959 4 жыл бұрын

It kinda looks like you're making it up as you go along, which is fine, but I would have started with a pair of steel trailer fenders with the back plates already welded on and just modified them to fit. Would have saved a ton of work. I'd like to see how you finished up the outside of the wheel wells. Are they welded to the inside body panels? Anyway, it looks great.

@starflite3 4 жыл бұрын

Excellent work fellas. Kind of curious as to the factory interior panels. Did you have to cut them or were they already separated at that height? Also would have like to have seen you fitting those panels back in. Love the paint work you are very talented.

@SeeMooreVids 4 жыл бұрын

I’m amazed at your creativity and ability to get it all together. One thing an old guy like myself needs is clear episode numbering. I don’t know if I’m missing the series numbers. Thanks for an incredible site. Steve, Plymouth, MA

@paulbaker5085 4 жыл бұрын

Why no strainer when pouring paint in your spray gun . Keep up the good work and vids .

@markrandall1456 4 жыл бұрын

Is there s video on the CJ5 next to where you are working?

@ImTheJoker4u 4 жыл бұрын

Your next project should be some work tables. Get up off the floor and work like gentleman!!!

@wcollins4974 4 жыл бұрын

I'm curious? I saw the angle onoutside of wheel tubs but no body/skin welds ??? How did you really fix that or foreget it ??? Without support there the body will buckle there ??? Look at any Satellite or Road Runner an some Fords that have seen rough service ???

@georgesmith5933 4 жыл бұрын

Sik..... yeah boy

@tkskagen 4 жыл бұрын

Why "Pine Planks" and not Cedar?🤔 Thanks for sharing this video! Take care, 🤓 -Thomas Western Washington State

@Properformancenutritioncom 4 жыл бұрын

TK Skagen Pine is cheap

@redneckrhymes2026 4 жыл бұрын

Who else would make that a tiny home

@orlandopadilla8304 4 жыл бұрын

Copper and brass with stainless steel rivets. That would pop...

@ahmedal-prince6438 4 жыл бұрын

👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@enriquelopez9124 4 жыл бұрын

Hey guys, is that truck in the back annother Metro, you could have gotten the meassures, veryfy with the truck in the back, and proce3d with the making of wheel wells.

@BrianSmart1959 4 жыл бұрын

That looks like a Studebaker Zip van, not a Metro. It wouldn't be the same.

@donaldharris9657 4 жыл бұрын

Model it to see exactly where you should break it.

@donaldharris9657 4 жыл бұрын

They make a longer pair of finger clamps.

@maeve4686 4 жыл бұрын

Pàrker Weatly, the mechanics of the air bags has to go somewhere. IMO it is not " ruined ".

@senninmodo2247 4 жыл бұрын

Can you fix a acholar bus for a video

@paulkrueger1883 4 жыл бұрын

Bro you need a work table !

@orlandopadilla8304 4 жыл бұрын

Why did you punch the holes in the angle iron and not the sheet metal?. Did you want the spot welds to show?

@perrydegonia5755 2 жыл бұрын

You are good at fabrication. Some people would be totally lost. They don’t know you go to use The brain once in a while

@michaelfarrell1084 Жыл бұрын

Use the straight edge, measure the length of the straight edge half that is your center. Easier, more accurate.

@myavo 4 жыл бұрын

wear a respirator when rattle canning stuff too..

@Outtatime247 4 жыл бұрын

For sale?

@willefixit 4 жыл бұрын

hey there .hear 2.

@saamkeschawarsi 4 жыл бұрын

Is this car for sale?

@toddsingler9423 4 жыл бұрын

Great work guys! Do you have the Mighty Metro on the road? Just subscribed to your Channel the last thing I can find is where you finished inside. God bless you both for what you do.

@TurninRust 4 жыл бұрын

Thank you for the kind words! Should be done in 1-2 weeks!! We are still filming and working on it.

@donaldharris9657 4 жыл бұрын

Nippers would be just as fast and probably neater.

@senninmodo2247 4 жыл бұрын

@shadylikeit2260 3 жыл бұрын

Those old engines you start up why don't you guys try oversizing there pistons , thanks

@bobshipman2333 3 жыл бұрын

Let us know your background on how you learned all what you know

@mizinho012 4 жыл бұрын

Pintar sem lixar ?

@ser-dem2415 4 жыл бұрын

test ?

@adamheazlett1179 4 жыл бұрын

You got alot body building gear but nothing to cut with.Build a work bench and you do some weird measuring buy a square and level.at least youre trying.Adam