fredintheshed1 Cool, thanks for watching.

could be a little brighter because they are new. The 0.72w is the brightness. I'm not sure what the original specs are.

cigarobsession Also, great to see those nice lights on again.

zx8401ztv Yes, I don't think I purchased any of those bulbs.

you are welcome. Thanks for watching.

Wow! That's cheap.

@@RobertDIY we used these bulbs a lot in architecture model making. Later I realized they are the same thing. Lol

@@RobertDIY the key word for search: 12V (diameter) (color) micro light bulb Then you will get it.

T Jalanugraha You are welcome.

Thanks for watching.

I think I have a link in the comments to the bulbs.

These are 12v 3mm light bulb. You can find them on Amazon. 10 bucks for 100 pieces.

You are welcome

nope

+Laurence Bond Miller Cool, thanks for sharing.

No sir. I don't like bright lights.

MARCOS MARTINEZ Hmmm, that should be like the x70 cars. - kzfaq.info/get/bejne/mr-AnbZ8vraaloE.html

MARCOS MARTINEZ kzfaq.info/get/bejne/bseYfrRm2Lqcmps.html

You are welcome.

+Anton Tyberg Dremel the back of the switch to access the bulb. I can ship you a good one if you'd like.

Thank you alot Robert DIY but I already have a replacement. I'm changing the colour of my interior light on my project car to green and blue. So all those beneath the dash are going to be bright green so I suppose that means I'll have to sodder it and replace the bulb with my new bright green one.

+Anton Tyberg it has a twist bulb in it, you just have to Dremel the casing to get at it.

You are welcome.

Lifted out if they are not glued in by soda.

Thank you!!! I forgot to mention i have a 96 850

Do they work when the car is off and no keys are in it?

kzfaq.info/get/bejne/rpl9g5x8xraxoXU.html

kzfaq.info/get/bejne/msyZm6uh38XNk6s.html

I will check without the keys in the morning. I did not think to check them that way. Thanks!

I watched the video on the ignition switch, interesting, my wife says sometimes the key turns hard. Is that a sign the ignition switch is bad? Thanks for getting back to me so fast!

+Frejdyn Jarrett just sold one. My yellow is for sale.

I saw. Don't have $6,900 for it. A yellowbird with N/A cams is a thing of beauty!

+Jim Jacobson If you are referring to the Home Link buttons on the visors, they didn't become optional until '99 I believe. You can install them on any P80 car and they do work fine. There are 3 buttons so you can control 3 garage door openers.

+Robert DIY No, not on the visors themselves. I'm having trouble with the set of three buttons on the ceiling of the car directly above the rear view mirror. The center button is a 3-position rocker switch which determines whether the dome light and above-passenger-door lights come on when any door is open, or not at all, or if they stay on. On either side of this rocker switch there is a 2-position push-switch which turns on an overhead light (map-reading light) for the driver, or front passenger, depending on which side of the rocker switch it is. On my 850, the (plastic?) hinge for the rocker switch has broken, and two itty bitty springs came out which obviously make the electrical connection. Without this switch and its little springs in place, none of the interior lights will work. I was hoping you had some experience with removal and repair of this simple, yet vital little panel. Particularly, how to safely remove the trim piece so I can get at the switches. I don't want to break the plastic trim and/or any clips it uses to stay in place, and I want to be able to safely remove this part from a JY parts car.

Did you search "Dome light Robert DIY"? - kzfaq.info/get/bejne/rseWda6XxsiRZJ8.html

+Robert DIY No, but that vid was exactly what I was looking for: how to get that panel off without breaking anything. I guess I didn't know enough to use "dome light" in my search. Thank you for your time and activity!

No, I had a session of that on a HOWR video where I broke 4 of them in the junkyard.

oke thanks! Wish me luck with the next one.

Keir Halewood Is pushes out from the back. Just pull the switch next to it, then push it out.

Robert DIY thanks!

Keir Halewood actual since have an s90 with the wood trim the dimmer and headlight switch lock into the trim piece from the back. So you need to pry the trim piece out from the top left of the panel then it slides to the left so you can pop the switches out. The bulbs are real tricky to get out on these switches for some reason.

Ok.

Kier, I have the same problem with the actual headlight switch itself that has gone bad on my 98 Volvo S70. I have another switch I purchased at the ready, but I'm clueless on how to get the old switch out for replacement. Can you or Robert give me any pointers on this?

Tosh Anderson Some people do change color and to LED's.

do you know what led blub size or part number that would be. thanks.

No, I have my hands full just keeping things normal. No mods for me.

😄 i understand i was wondering cause ive got led lights come for the speed odometer and was gonna change them out since i have it apart and try and mach the colors since i do have about 3 lights out.. but thanks anyways

I've seen it done.