Interior Trim Painting Hacks. DIY How To Paint House Trim Work.

Рет қаралды 1,289,519

8 жыл бұрын

How to paint trim inside a house. Simple tips and hacks painting wood painted trim work. House painting tutorials for the DIY painter or home improvement professional. Handyman painting tutorials and instructions. DIY Instructions painting trim and home improvement hacks on The Idaho Painter.
Become a member of Paint Life TV: Join my channel to ask me quesions personally, have access to members only video, get a discount at Paint Life Supply Co. have early access to video before they are posted to the public, and offer suggestions for new topics to become members only videos. Join here: / @idahopainter
The Idaho Painter offers all the interior and exterior house painting tutorials and instructions you will ever need. Learn the secrets that professional painters, sheet rockers, and finish carpenters don't want you to know. We have all the house hold painting hacks you could ever want. My DIY painting channel offers simple to follow instructions on painting, paint sprayer operations, drywall repairs, and much more.

Пікірлер: 1 000

@joshsawyer2622 6 жыл бұрын

Finally a painter who sprays the top edge of doors and windows. It was so refreshing seeing John do that. It drives me nuts when painters skip those areas and I always caulk them in and paint them. Those top edges are dust collectors and a lot easier for the homeowner to wipe off while cleaning if they have a nice coat of semi gloss paint on them. A raw wood or MDF edge...not so much.

@Idahopainter 6 жыл бұрын

Yes, thanks for watching Josh!

@rubenbarrios2487 8 жыл бұрын

You make me a better painter every time I watch your videos. Thanks for the help !!!

@magdalenoavendano39 5 жыл бұрын

I want to say thank you so much and to all the contractors, entrepreneur, framer, plumber, electrician, and the list goes on. Because of you guys my God. People dont know the advantages and I plan on taking every single one. Thank you so much. True meaning. And I hope everyone could spread the appreciation and thank the man for the next video you watch!

@mdids7424 7 жыл бұрын

Thank you Chris for all the time you take to make these videos. They have helped me take my company to the next level. The clear caulking technique was a game changer for my wall to trim transitions.

@ajwilliamspaintingandpower7631 4 жыл бұрын

You should definitely put paper behind the door when spraying on or against the wall. That semi gloss will flash through your topcoat after the room has been completed. Anywhere semi gloss overspray hits the wall will most likely flash shine through

@bklynboyeny 3 жыл бұрын

I’ve done that many many times and never had an issue. Of course 2x coats on walls always....

@jamesspielman1927 4 ай бұрын

I am having this issue on a job right now, Lesson learned.

@nouseforaname6846 5 жыл бұрын

Nice to see guys willing to take a couple extra steps to really insure a quality paint job without sacrificing the production end. 👍Bravo👍

@Idahopainter 5 жыл бұрын

Thanks for watching Audy!

@ColdWarVet607 4 жыл бұрын

I love watching the spray pattern of the double window trim, spraying window half of inside trim first then room side of inside trim next and the COOL transition to the outside. Maneuvering like an Indy Rae Car Driver!!!!!!!!!!!!!!

@BlackwellManagement 6 жыл бұрын

As a newbie painter myself ...you sure make this look easy! your craft shines very brightly my friend you are great at what you do!

@jeffsmith5473 8 жыл бұрын

I'd just like to say thank you for posting all of your knowledge painting in spraying interior and exterior. about a year-and-a-half back I did a 2700 square foot interior with 8 different colors before this I had always brushed casing and molding, a long with the door jams then I came across your videos and set up the containment and spray the ceilings and trim and brushed and rolled the walls, Flawless finish buddy so just wanted to say thanks Chris you have been a huge help I'd like to support and get some nice t-shirts as soon as I'm able anyways Jeff and Scott from Michigan

@jrc6028 4 жыл бұрын

I'm headed into my very first interview with a painting company this morning and I just wanted to let you know that your videos have given me a boost of confidence when I need it most. Wish me luck!

@WestCoastGoldProspecting 4 жыл бұрын

Buck Aztec , so how did it go ?

@coloradocaretaker 6 жыл бұрын

Hey Chris thanks for your videos I'm a professional painter in Colorado for many years I'm 50 now and painted since I was 13 and you definitely know your stuff and I've gotten some tips from your videos keep Rockin in the Free World thanks again

@Idahopainter 6 жыл бұрын

Thank you very much Paul!

@jeffsmith5473 8 жыл бұрын

true professional,great character.amazing young crew you guys are great keep up the fantastic work guys!!

@PropaintersbrisbaneAu 7 жыл бұрын

This is a perfect video.. You are really good at explaining the process without giving excessive info. I enjoyed it and you are obviously very good at what you do. Loved it.

@Idahopainter 7 жыл бұрын

Thank you very much for the support!

@Phormify 6 жыл бұрын

Great vid - I like the idea of wiping the excess caulking on the window masking. That is a very efficient way to do it and saves a bunch of time. So glad to see a painter actually use caulking and do it right. So many seem to miss that step because they don't think anyone will notice, but it makes a huge difference. Also, nice cameo (blooper?) from Brooke at 3:07 - oh gosh.

@dvader3000 5 жыл бұрын

If that surprisses you is because you never done any caulking in your life,moron

@omg_wtf 3 жыл бұрын

Dude I've painted my entire house from your videos. Big thanks from London! Best on KZfaq by a country mile!

@chrishensley2732 6 жыл бұрын

I mean you guys know your stuff. And explain everything I never have to re-watch. The video so thanks for making my job easier

@LifeofBliss 6 жыл бұрын

Your videos have helped me out so much this past year! I'm actually finishing my basement now and will be painting everything in a few weeks. Thanks for the awesome how-to videos!! I have been doing videos on the basement build if you are interested in checking them out!

@Idahopainter 6 жыл бұрын

Glad they've helped, thanks for watching!

@ioflowboy Жыл бұрын

@@Idahopainter you are a slop artist.... cualk your tape..... lamo 😂😂😂

@connertinkler 7 жыл бұрын

Question. I always mask off around the trim to prevent the oil based paint from flashing or building up on the wall. I never have done what you have done in this video but would definitely like to try it next time to save money and time. Also I only ever spray oil based paint on woodwork since i primarily do remodels. The wall paint is usually a semi-gloss with flat on the ceiling. I always just have a fear of flashing on ceilings. I only use quality paint as well. I love shooting pigmented laquers but in a lot of my cases the designer prefers oil based so I can't get away with shooting both. I shoot the trim then install it with touch behind. Can't touch up laquers with a brush of course. Love your videos they are awesome. You know your stuff. Do you ever run into this similar situation and if so do you mask? Do you think it will flash? It has to be perfect too because the homes i do are higher end and extremely particular about every little detail.

@user-wd5iq9xh1o 5 жыл бұрын

You guys rock! I am a painter of 25 years and always like learning about my trade.

@Idahopainter 5 жыл бұрын

Thanks for sharing🤙

@irainkoolaidTTV 2 жыл бұрын

first time airless spr1ayer user...painted trim over the weekend...was dripping off the window trim onto the floor. wish i knew about the deglosser beforehand! will use next time thanks. although i did know i shoulda sanded it but was too lazy.

@elonmusk8667 5 жыл бұрын

I became a better painter from these videos. Thank you!

@jonathankathol9555 5 жыл бұрын

Great video! Do you guys ever prime over existing semi gloss trim? or just use the deglosser and get to work with your first coat of new semi-gloss

@jerrypuda2668 8 жыл бұрын

Great videos! I really appreciate your time and effort helping others. Gotta say the Amazon store was a nice collection of items, albeit, many out of stock.

@ambassadorpaintingco 5 жыл бұрын

Thanks, Keep creating more information for House Painting

@danielpeters4724 8 жыл бұрын

Have you tried the Pro Industrial High Performance Acrylic.. Its great for trim and also an interior/Exterior product like Solo

@chrisblanchard1663 4 жыл бұрын

I like the durability and look but it's hard on brushes. It ruined to brushes on two houses.

@jamesquant4194 8 жыл бұрын

are you spraying semi gloss on the trim and doors. do you sand the over spray then paint. sand the trim then degloss or degloss then sand the trim. thankyou

@randyswiech7884 4 жыл бұрын

Thanks for the painting tips Chris! I'm a handyman basically but a lousy painter. Subscribing to your channel is very helpful! Thank you!

@workinghands1805 5 жыл бұрын

I'm a home improvement business owner/operator out of Arkansas so we do everything from the roof deck down! Couple things 1. That's a secret door /shelf awesome 2. Why do you use particle filters and not Vapor filters? Anyway thanks for the awesome vids!!

@melissawheeler7374 7 жыл бұрын

Would love to see you do an entire room from start to finish

@Idahopainter 7 жыл бұрын

Yes, I will have to do that!

@kathleensayre4172 6 жыл бұрын

If I need to spray 2 coats of primer and 2 coats of paint, how can I remove the frog tap and window covering while its still wet?

@timbrents120 8 жыл бұрын

I think I can do by hand faster than all the prep to get ready to spray. But then again I paint like water flows. Good work foe sure!

@jacobcolley8954 5 жыл бұрын

No matter how good you paint it will never be as good as properly sprayed trim. If done right it's near glass smooth finish. Depends on what the job calls for.

@gopherwd8607 2 жыл бұрын

Thank you very much for sharing your knowledge and experience.

@123joshmallett 6 жыл бұрын

I’m having an issue with new construction. After spraying trim when I go to paint the walls the semi gloss that’s on the wall from spraying trim is hard to cover with one coat when cutting in. Any tips other than masking trim first. Or any other obvious solutions. Thanks

@matthewdean8070 3 жыл бұрын

shield..quick and simple

@bad2b0ne 8 жыл бұрын

For interior repaints, do you always spray trim first? Also, is it harder to cover the semigloss paint with wall paint if you spray first and don't mask?

@quantom3392 2 жыл бұрын

If your spraying your trim and doors I find it’s best to do it before painting the walls. The semigloss or satin will make it easier to cut in a straight line to the edge. Another option if your trim paint is cured enough to tape is to tape the trim with 2” blue scotch tape or better is the frog tape and mini roll the wall edge to trim. Yes it may take 3 coats for full coverage depending on paint/colour/thickness etc. you can use clear caulk on the wall edge of the tape to ensure no bleeding but wipe excess off tape and pull the tape while final coat is still soft.

@maxd7228 8 жыл бұрын

Quality videos. Thanx for taking the time to make them. Lots learned here.

@codorin 7 жыл бұрын

i love sherwin williams for walls but always dulux life mater or diamond semi for trim. i find it better. (just wanting to know what you really prefer spraying)

@motorcyclelad 8 жыл бұрын

Hey Chris! Thanks so much for all your videos and hard work that goes into making them! How do you find good workers who actually care at all about the quality of their work? I've tried three guys and spent more time trying to fix their mistakes than the time they saved me by helping. Like you, I'm extremely detail conscience and do all the details the homeowner will never notice, but make the finished product pop. I started less than a year ago full time and am getting to where I could really use the help, but can't offer benefits so all I can find are guys who can't work elsewhere. Do I need to raise my prices to curb the long waiting list and keep at it alone?

@BrettTracyRealtor 7 жыл бұрын

homewyse can help yoi out if you havent ran across this site... im a diyer and like to see what the going rate is so i can gauge if im getting a good deal

@kellyaraujo273 7 жыл бұрын

motorcyclelad good workers who actually care are people that figured out that the boss is a cheap prick and started painting for themselves..... i will never work for 120.00 a day for another man when i can make 120.00 in 2 hours on my own job..... also painters are for sime reason drug addicts, smokers, and drinkers.

@bl4d3dsh4d0w 7 жыл бұрын

lmao... your spot on the first part...not so much on the last part.

@rogerreich478 6 жыл бұрын

motorcyclelad c

@BAW310 6 жыл бұрын

motorcyclelad teach them the tricks, pay them well, give them ownership. Some will stay, some will leave... that’s the nature of the business

@joshuabryan2248 7 жыл бұрын

Does the overspray that gets on the walls around the trim create flashing issues when you come back to paint the walls? I'm about to tackle a complete house repaint and was worried that semigloss trim paint might cause the eggshell wall paint to flash wherever there is overspray. Thanks for the awesome videos!

@OSR_1 2 жыл бұрын

Did you ever find out the answer to this? I have the same situation and question

@robertoibarra4959 2 жыл бұрын

They should of at least put one paper to cover the wall

@TheRealNosferatu 2 жыл бұрын

For what its worth, i brush regal select semi gloss on trim before walls and then cut the walls to the trim with regal select matte. Wont cover the trim paint in one coat but the trim paint on the walls doesnt flash👍🏻 might be worthwhile to do a test patch somewhere to make sure tho

@OSR_1 2 жыл бұрын

@@TheRealNosferatu awesome thanks. I’ve gone with brushing the trim first, will then mask before spraying walls and ceilings (all white so super quick hopefully).

@seahawksFishing 2 жыл бұрын

If you ever worry about flashing mask and primer. It's that simple primary cover up any gloss

@matbroxb1008 2 жыл бұрын

Hey brother Chris, just recently found your channel. I appreciate the school . Thank you

@Avital4414 4 жыл бұрын

Chris: have you done a video that shows you sanding trim and walls? If not, please consider doing one. Thanks!

@Jamiemily3 7 жыл бұрын

Great vids ! One question for you. When you spray trim with a 310 tip, does it require two coats or is one suffice ? Thanks in advance.

@Idahopainter 7 жыл бұрын

Usually two coats

@XCPainter 7 жыл бұрын

Home Improvement How To's It looks like you pulled window masking after one coat?? Maybe one coat on this job but two on others?

@alienproductions9948 3 жыл бұрын

@@Idahopainter So do you remove the Frog tape while the first coat is wet and then caulk and Frog tape again for the 2nd coat?

@rustyreview 5 жыл бұрын

do you just prime over the overspray on the walls? or do you prime the whole wall?

@charlesyoungblood3169 7 жыл бұрын

Absolutely Great for seeing what to do and what to paint first. Thanks a million!

@Bluehellcat1 5 жыл бұрын

I suggest to ad to the spray extension the awesome 180° Easy Turn Directional Spray Nozzle to fast and easy spray . You can find it at any paint store or the Home Depot paint department .

@Idahopainter 5 жыл бұрын

Good tip

@MsSnowboardjunkie 8 жыл бұрын

Hi, Chris. Loving the vids! Thank you! I've read that spraying is more difficult than cutting and rolling. People say it can be tough to avoid streaks. They're also saying that, because of the set up, it's not a time saver. I also saw a comment on a forum about backrolling foggy finishes. Would you weigh in on that? I have 1800 SqFt to paint in a very short time. What's faster, looks better?

@duartepaintinghandymanservices 8 жыл бұрын

Spraying more difficult? Its the other way around, for myself I enjoy spraying and do it as often as I can, like the Idahopainter said its just alot of misinformed or untrained painters who are saying this things

@garyhetrick6997 5 жыл бұрын

So when you go to spray the walls, how do you stop the semi from flashing (bleeding through)?

@josecarrillo9577 5 жыл бұрын

Good question , i like to know too

@JoseRodriguez-tt8md 2 жыл бұрын

Primer

@SuperMusicman1975 7 жыл бұрын

awesome work Chris!!!! love learning from you bud!! we need a guy like you in PA!!! LANCASTER COUNTY!!! LOTS OF MONEY TO BE MADE!!

@troyshayler3502 7 жыл бұрын

that's what I thought but I replaced it with the tip. they've both never been used before. even sprung for a new tip housing as well...

@kevinc6383 8 жыл бұрын

is there a follow up video showing painting the walls after the trim has been sprayed?

@laurat9052 4 жыл бұрын

I thought the same thing - what the hell - that nice dark wall has white spray all over it -stupid

@davidbahr9612 3 жыл бұрын

@@laurat9052 this is the order pros paint in- trim then walls. If you want to save your walls its much faster to brush and roll the trim. I like using an oil enamel in that rare instance

@naughtysauce4323 3 жыл бұрын

@@laurat9052 You're obviously not a painter, they would never do this if they weren't going to paint the walls dummy.

@yolandamoses3990 8 жыл бұрын

"Hi, you've reached Brook...oh gosh" lmao

@lorip5677 4 жыл бұрын

Great video! If we have a painter grade cream color trim (likely oil based) and want to switch to a water based white trim paint color, would you recommend priming first? Want to make sure it doesn’t yellow over time.

@EvolvingFully 3 жыл бұрын

Thank you! big help!

@jlgrizzly7972 7 жыл бұрын

Great content I have learned a lot, I also would like to give a hearty Amen to John 14:2-3 Thanks for the hard work.

@conradsmith6037 7 жыл бұрын

J L Grizzly do you think Gandhi is in heaven? Even though he wasn't a Christian, and was never saved.

@ryanmccue8180 4 жыл бұрын

@@conradsmith6037 I believe there is a verse that says Will not the God of all things do what is right. Also since God is completely holy he cannot sin everything the Lord does is righteous and perfect that's his nature.

@joshmelton9471 3 жыл бұрын

"God is the savior of all men, especially of those who believe. " -1 Tim 4:10

@VicWins80 8 жыл бұрын

does the sheen from the over spray flash on the walls?

@edchaos2679 4 жыл бұрын

Sometimes. Depends on the product and sheen

@VivaLaGolf42 4 жыл бұрын

I wonder if they sand, and apply some de glosser he showed earlier? I wonder that too because masking it off takes so much time

@mmthc303 4 жыл бұрын

If sprayed correctly and no heavy over spray marks are left behind, the sheen will not flash after 2 coats on the walls.

@richwilliams1589 8 жыл бұрын

Hey, great video. I like the caulking around the frog tape tip! What type caulk do you use. How do you (I) avoid the caulk from setting up before you can get the tape off or does it matter? I'll be doing this on pre primed mdf soon any other technical advice for this novice?

@richardvarty7349 7 жыл бұрын

sick page. Thanks for all these tips guys. cool shirts too!!

@Idahopainter 7 жыл бұрын

You are welcome!

@joeb9848 7 жыл бұрын

do you get alot of runs with spraying. do you ever use a wizzy rollor and brush your boxes and then wizzy them. JHB PAINTING-SERVICES

@Idahopainter 7 жыл бұрын

Never seen or used a Wizzy

@sethj7397 7 жыл бұрын

hi brook lol

@Idahopainter 7 жыл бұрын

lol, I'll let her know you say hi

@paynetreyvon1261 3 жыл бұрын

_hello brook_ TELL HER I SAID HI TOO

@david7101 Жыл бұрын

@@Idahopainter awesome vid! I am getting paint tails when I spray my doors, even when I turn the pressure up, I’m using the same tip

@brucewilliams6292 5 жыл бұрын

Thank you for all the tips. Well constructed video.

@Idahopainter 5 жыл бұрын

Thanks for watching Bruce!

@isralien23 5 жыл бұрын

A True Professional, a pleasure to watch your guys work.

@protectivepaint53 7 жыл бұрын

someone said the spray man sucked,he makes a mess. at least he knows not to pop trigger in the middle of of woodwork. that would cause spits in his finish. good job !!

@previousclient1610 7 жыл бұрын

Robert Peters what is pop trigger?

@skyebluepainting 7 жыл бұрын

Ruby Frazier all that means is letting go of the trigger(stop spraying) in the middle of the object you are painting. when you let go of the trigger (pop) it can spit large drips of paint onto the object .

@MrHyrczyk1 6 жыл бұрын

Bo Haggin Of course extension causes spiting unless u have the special extension valve . For regular window and baseboard spraying extension is unnecessary

@ReynierMartinez 5 жыл бұрын

3:37 Glory to God! :)

@Idahopainter 5 жыл бұрын

Thanks for watching!

@nicolec.5938 2 жыл бұрын

Very meticulous painter 👏🏼 i love getting these tips . You very easy on the eyes as well 😅

@jamesswinney8858 Жыл бұрын

THANKS Paint Life 🤠

@knowledgeupon3142 6 жыл бұрын

Legit! Christian company. Thanks for the video.

@Idahopainter 6 жыл бұрын

Yes it is! Thanks for watching!

@diggingwitheddieandjamie4911 6 жыл бұрын

I go over my frog tape with a damp rag,activates the seal ,rather than letting the paint activate it,

@Idahopainter 6 жыл бұрын

Good tip, thanks for sharing Eddie!

@ruah5617 6 жыл бұрын

Never heard of that. Good tip!

@pnwshredder2559 6 жыл бұрын

Thanks man! Gonna try that out next week!

@xyu9911 5 жыл бұрын

mobil home millionaire 7

@rachelmarcoux720 5 жыл бұрын

Is this the solution I need to actually make the tape freaking stick! Cause no matter how hard I try i always have the tape come up so annoying

@artwrk4826 8 жыл бұрын

Good information , dude!!! Thanks for the help!

@vetran22 8 жыл бұрын

I would like to sincerely apologize for the rude comment as my cousin and myself shared this KZfaq account recently. I have since changed my password and would like to say how great your video was as this was the first time I watched it! Keep up the great work your energy is inspriring!! I would definitely like to get one of your paint life shirts!!

@thomasburr1768 5 жыл бұрын

Seems like you used a lot of paint on that window, I've been a paint contractor my whole life just something i noticed

@oscarayala9897 4 жыл бұрын

I was just about to said the same thing

@mnstrmike4853 4 жыл бұрын

These guys put way more time, thought, and effort than whats required. They must charge a lot to compensate for their oversimplification.

@tree7249 4 жыл бұрын

@@mnstrmike4853 I have been a painter for 30 years. Never have I had to degloos interior trim to paint it. Also I have never been called back to repair paint not sticking. By the time these guys get set up I am walking out.

@ronaldjacamo2915 4 жыл бұрын

new overland I have glossy brown old school trim & want to paint them white plus kitchen cabinets. Should I use 200 grit to lightly sand them to prep or what’s your steps?

@tree7249 4 жыл бұрын

@@ronaldjacamo2915 use some deglosser to dull it down. Wipe with thinner. Let it dry up for 24. Use a coat of xim bonding primer. Lightly sand. Then put on two coats of a good latex paint. Do all the trim first so by the time you get to the cabinets you will be familiar and do better on the cabinets.

@vhehn 8 жыл бұрын

I would have removed the doorknob. quicker than masking and better. details make the job.

@unclepizza72 5 жыл бұрын

It takes about eight seconds to mask a doorknob...

@chally46 5 жыл бұрын

Plus less chance of damaging the door putting the knob back on

@markmillward9733 5 жыл бұрын

Yes. Another tip would be to put paper or plastic on the wall behind the top of the door. In my own experience of 5 years of professional painting, Semi-gloss will flash through 2 coats of eggshell. Pearl or Satiin might keep it from flashing.

@velmashalaina7236 5 жыл бұрын

I would've went for the doorknob removal as well.

@keithy363 5 жыл бұрын

Mark Millward yep that happened in my rental property on a brand new build you could see the ghosting we call it in the uk from the gloss coming through the wall paint drove me nuts trying to figure out what it was 😂😂

@CandymanJrMint 4 жыл бұрын

It was great to hear from Brooke

@spencercolgan 4 жыл бұрын

Great job; I know this video is a couple of years old would you still recommend in your experience since this video a fine finish RAC-X this Dash 310 tip?

@smoknarrow 5 жыл бұрын

Don’t ever spray doors against the wall like this guy... out lines may accure

@markmillward9733 5 жыл бұрын

Not only that it'll flash in the right light, at least in my experience. Not trying to be a knowitall cuz maybe you have a way of hiding it.

@joelblundell5075 8 жыл бұрын

this just seems like a waste of time? you could of brushed and rolled everything and had it done times you finished taping up

@weaponizedmemes3461 7 жыл бұрын

Have you seen trim that was sprayed vs. trim that was brushed or rolled? Night and day. The finished product is worth the extra time, material, and work.

@shawnwilliams5138 7 жыл бұрын

Joel Blundell only if you like brush marks ove a flat smooth finish

@ridenorthwest1687 6 жыл бұрын

Joel Blundell Quality takes work. brushing and rolling trim will always look bad.

@diggingwitheddieandjamie4911 6 жыл бұрын

Except with white it may take several coats,esp with solo

@estep80 6 жыл бұрын

Say's the old dog. Mask and spray trim and base in 30 minutes in a room that size. It would take 2 hours to brush and roll that out 2 coats.

@StakRack 8 жыл бұрын

Nice to see a pro at work. Great job!

@chriscoco7243 6 жыл бұрын

I really dig your videos. One area that I think you can improve on is your spraying technique. When spraying doors it is best to maintain equal distance from the substrate. Breaking your wrist will cause a paint to build up in the center of the door while potentially skimping on the top and bottom. Also, what is the benefit of having the pressure turned all the way up? I would suggest doing that on ceilings or raw drywall but, not inside an occupied home. Perhaps you know something I don't. Lastly, RAC X Tip is called Rac10

@Idahopainter 6 жыл бұрын

Thanks for the tips Chris!

@nathanrussell7918 7 жыл бұрын

Spraying trim this way is a complete waste of material. Plastic, tape and paint. Alot of over spray. YES the semigloss will flash on the walls.

@Colwray1 7 жыл бұрын

Nathan Russell spraying the trim with Aqua Gloss etc.. Is easily covered when applying wall paint .. Unlike if painting with oil based gloss... Sorry but this way is far better than a brush...

@SuperMusicman1975 7 жыл бұрын

Nathan Russell bone head!!

@shadowwolf2742 7 жыл бұрын

Nathan Russell I agree sweetie

@shadowwolf2742 7 жыл бұрын

Nathan Russell your right but it will cover just fine two coats over it ....lol

@charlesdias4864 7 жыл бұрын

Which material using for paint trim?

@JB007SEXY 8 жыл бұрын

YOU, and your Men are LEGEND`S Great VID.

@mynameisnobody5838 6 жыл бұрын

413 rac turn your pressure down to about 3/4 and cross off your door it only takes one pass each way and you’re done. getting your speed correct takes a little to get use to but thats it. I also find it easier to turn your tip so the fan is up and down rather than side to side but thats just me. good job.

@Idahopainter 6 жыл бұрын

Thanks for sharing the tip Justin!

@davidbirdno2613 8 жыл бұрын

me and your boy have very similar styles when it comes to spraying I wish I could find someone that is decent at spraying but this is my 6th year owning my own company and have yet to find a good spray man but hell I don't mind doing it

@adriana5349 7 жыл бұрын

I love your videos! Have you ever had to spray the trim with oil base paint? If yes, would brush it or spray it? Thank you so much for your help with all your videos

@rvingmontanezway103 5 жыл бұрын

Great job guys love the ideas and work you do. 👍 I’m learning a lot thanks for sharing

@Idahopainter 5 жыл бұрын

Thanks for watching & support, we greatly appreciate it!

@streamscreen 4 жыл бұрын

I always check for adhesion,because paint definitely doesn’t stick to all surfaces.Ive found that emerald from Sherwin-Williams sticks very well to glossy surfaces without sanding or deglossing,but probably best to do anyways.

@Idahopainter 4 жыл бұрын

Thanks for sharing 🤙

@sPGgwUxYrSd7Cf5H 4 жыл бұрын

Your videos are great! I currently live in a home that I am redoing the trim work in. Do you have a video that shows how to spray trim in a house that is occupied? I’m afraid I’ll get paint on everything. How do you do your jobs without getting paint everywhere and having to repaint wall?

@dogshebiaboxing 8 жыл бұрын

Love your videos. When i spray doors i use the graco true coat cordless gun and it spray very nice but the sprayer you use looks like it sprays very fine. Not thick at all. With the true cost it takes a while to dry. Does your spray dry fast? And what would you recommend me moving up to for spraying? Thanks.

@ChannelEleven59 4 жыл бұрын

@paint life tv approximately how long did your prep work for this room take and how many people were involved? I love your videos / tutorials. They have been very helpful to me and my painting business here in Middle Tennessee.

@manuelrivas9141 5 жыл бұрын

Love this video,I use the same spray tip 310 ,keep the good work up.👌👍👍

@Idahopainter 5 жыл бұрын

Thanks for watching Manuel!

@manuelrivas9141 5 жыл бұрын

@@Idahopainterany advise on a 500 airlessco,ball keeps getting stock on the seat,I've been told is a reversible seat,and that I can just turn it over and use it that way. Any advise ? Thank you

@Setsueiori 8 жыл бұрын

Another great video thanks for the tips, I got one small question for you; I usually spray trim using super pain from SW is there significant benefit to changing to that solo paint you are using in this video? and how is it price wise compared to it? woops guess that's two questions =P

@LAXOFICIALsetyoursoulfree 4 жыл бұрын

Awesome info

@rorybellamy2533 8 жыл бұрын

now that is impressive ! Ultra Smooth finish , and FAST! excellent coverage and masking , Quality videos, what size Tip should a DIY homeowner use? 5 / 17 ? is the Tip important ?

@ben68442 4 ай бұрын

I see something that you can improve on in your spraying when I spray the inside of a cabinet, I think of it as a flat panel that has not been folded into a box yet and spray in the direction of top and then work my way down- left side, back, right side, and then vise-versa all the way down. I think you will find you have less of a cloudy finish this way.

@rebusd 8 ай бұрын

clear caulking as an additional measure... excellent idea :)

@Idahopainter 8 ай бұрын

Glad you liked it!

@Rodasfamily 3 жыл бұрын

You guys are awesome I learn a lot just watching you guys much appreciated it ! Quick question what brand of spray painter gun machine you guys use? Pls share the info on where I can buy one?

@adventureswithgrandpa Жыл бұрын

Great informative video.

@Jonotheproducer Жыл бұрын

Now I want that sprayer 😂great work!

@omarlobo6454 7 жыл бұрын

very nice. thank you. i glad you give hoy triks

@Javier-ll4ov 4 жыл бұрын

Good job wow always

@vetran22 8 жыл бұрын

Recovery time for myself as well! That's why I wanted to apologize for the ignorant comment that was sent by my cousin who I was sharing my KZfaq account with until I discovered the comment my email. Thumbs up man!

@Dougieboy1 Жыл бұрын

Good stuff!

@WatchJason 5 жыл бұрын

Quick question - ive installed my flooring and my walls are painted. Due to timing of contractors. Now i am getting my trims installed and door casing in place. I will mask all my flooring but how much of the wall do i need to make from the trim up to avoid overspray?