1. Use 1/4 or 3/8" plywood instead of OSB, OSB will flake apart when exposed to water, even when waterproofed. OSB is also much heavier than 1/4" or 3/8" plywood. 2. For easier transport, you can cut the wood flooring into 3 pieces, rather than 1 large board. 3. Always install the floor boards before fully inflating the Excursion, inflate about 2/3rds full and wedge the flooring into the raft.

My two year old sits and watches your videos with me!😂🤷🏽‍♀️ She likes you and she said tell your daughters hello! Thank you sooo much for including measurements!🙌🏽

Great video! Love the family too!

Very cool! I want to put something together like this using an Excursion 5 as the base as well. I read the Intex mount can handle up to around a 3hp engine but I wanted to run a 6hp outboard so I was considering reinforcing the floor at the back (extra to the already fitted hardboard floor as you've done here which if you don't mind I'm going to shamelessly copy!) and welding up a mount to bolt to the reinforced section. Then I'd use the intex mount in conjunction with the home made mount to spread the load and stresses out more evenly. I've even considered fitting a central rib of wood under the floor in the centre with curved ends and pipe lagging padding to add a little bit of a 'V' to the underside to help manoeuvring... I am worried that might stress the inflatable boat floor though! I guess some expanding foam carved to shape to fill the gap a little might help though!

Cool boat with very nice inflatable floor on which you can easily stand. Why do so many people need wooden floor ? To make boat heavier , harder to transport ? To have less space in the boot if your car ?

Bravo, perfect work ! 🤗

The holes you drilled for the zip ties don't have waterproofing in them. This will still rot.

Very informative! Thanks a lot!

great job, thank you so much! very informative 👏

Quá tuyệt vời bạn ơi!

Great video. I just bought this bought where did you get the motor mount extensions? I can’t find them

Great job man!

Thanks for the video, are you able to put the floor on SUV roof rack and drive on the highway?

Awesome job so it’s an 8 foot board and across 35 inches , top 34 I Inches. Correct

Also do you still pump the bottom when you add the floor?

Buena amigo. Me puedes decir que motor tienes? Muchas gracias Saludos desde Berlin

can you make floor and sell one to me? I am not handy...thanks!

Great video!!!! I think I will do 2 parts.

Is the aluminum pipe going through the Oar placements 1 inch or 1 1/2inch?

Hi, congratulations on the job. How thick is the wood? 10, 12 or 15mm? Thank you

hello, can you advise me what cloth you used to cover the floor? Thank you

Great Job!! Where were did you buy this from? I am having a hard time getting one at a decent price.

Thank you for this good information 🙏

Perfect explanation

Do you carpet both sides or just the top

Thanks for the video! Where did you get longer motor mount arms?

Hey buddy. I've just ordered this exact model can you post the exact dimensions you cut the plywood and what type you used?

What size of the plywood board ur use?

Please help me with floor. Can I buy one off of you.

Can you stand on the boat with the new floor?

Good job where did you get the csrpet

Great vid thanks, whats the wood sheet called please?

99% of u won’t read this but Have a nice day

Same idea as “Take It’s” video. 🧐 hmmm