Vacuum won't move? Goes only one direction? Easy to fix. Hope this saves you some frustration and money!
Пікірлер: 143
@dougs4given4 жыл бұрын
Dude!!! although this video is two years old it is still being used. You are an absolute lifesaver. Thank you, it worked. I was trying to blame it for not working on my wife. LOL
@mardochekrikeb35214 күн бұрын
Well explained,you just saved me buying more expensive pool cleaner, thanks buddy.
@ioana93828 күн бұрын
Nicely filmed and explained. Mine lasted about 2 years before now getting stuck against the wall with water flowing only one direction. The clear direction on how to open it up will save me some fumbles. We have lots of trees around and above the pool, so in my book, the little robot has held its own. Don;t worry about the big pump -- it will help greatly with keeping your pool clean. I have attached mine to a hayward 18" filter and have been trouble free despite the muck that keeps falling in the pool!
@franny5295 Жыл бұрын
I saved this video. I'm certain, with my luck, it will prevent me throwing my unit over the fence and then having to walk back there to pick it up and put in in the garbage. So thank you... Edited to add: Intex needs to pay you for your contribution...
@hereonoccasion5 жыл бұрын
This video-clip was perfect for us. Even the warning about the easy-to-break clasps / clips was great - no doubt we would have broken them. And best of all, it was quick and easy. Thank You!!
@JB-hb9mi2 жыл бұрын
"Hang on... I feel a single grain of sand." My man is a perfectionist! 😄 Thanks brotha! Extremely helpful!
@sharyncanady26606 жыл бұрын
Thank you so much. Excellent video. Clear, concise, very well filmed and narrated. I opened the pool yesterday and my intex vacuum that worked great last summer is just sitting there!! I am getting some silicone lubricant and a screw driver and fixing it tomorrow! Thanks again!!!
@nancysimmer99084 жыл бұрын
My vacuum stopped hit the walls, would not move anymore I got on KZfaq, I found you and your instructions, follow them! I have a smile on my face and a happy pool 🙃😁😁😁😁 thank you!
@laurabaker46456 жыл бұрын
You may have saved me from a nervous breakdown as well. Going to try it right now. Thanks!!
@kellyrowell24534 жыл бұрын
Thank you! My vacuum was only moving in one direction and would get stuck the first time it hit the side. I followed your instructions to take it apart. My problem wasn't the same. The wheel gears had sand built up in/around them and they were stuck. Since I didn't have any silicone lubricant, I only rinsed everything for now. It is back to working again. I'll pick up some silicone soon for a longer lasting fix.
@RobertHupertz6 жыл бұрын
Thanks mate, you are a life saver. Was about to spend big bucks on a new pump. My issue wasn't exactly the same as the gears were stuck but by you explaining the mechanics of the thing I was able to get it resolved. Thanks again!!!
@BHBandDnD6 жыл бұрын
Robert Hupertz same here, i took it apart and put it back together and voila, magic. The dude is a life saver in my book.
@ashrpblond4 жыл бұрын
you dont even know how thankful i am for finding this video i just told my son i was going to go run this damn thing over and then laugh i have been messing with this thing for 4 months..thank you so very much
@lizgarcia48056 жыл бұрын
This is great!!! Thank you so much for taking your time in making this video. You are a lifesaver! Been soooo frustrated w/ my vacuum coz it keeps getting stuck to the walls and won’t move until you rotate it manually & eventually hit another wall for it to stop again. I have spent so much time trying to figure out what’s wrong & ended up spending $180 to upgrade my sand filter to 3000gph flow. I wish I seen this video prior to my spending. But now, it moves flawlessly & once it hits a wall, it takes less than 30secs to internally move that valve to switch direction. Yes! There’s a lot of sand inside upon opening & ended up using vaseline to loosen up the gears inside like you indicated. I actually took apart the bottom piece too to clean off the sand stuck in the gears that prevents the valve to switch. Now I just need to figure out a way to prevent sand from going into the hose coz that’s what’s causing the problem w/ the movement. Thanks again for sharing!!!
@BentRim2 жыл бұрын
Perfect solution. My issue was slightly different in that the valve worked easily but the gears were full of sand. Your video aided in quick dissasembly. I cleaned it all up, used a little white lithium grease on all the gear bushings and it's back to running like a champ. Thanks again.
@shirajzl7 жыл бұрын
Very successful first video ! I've searched half of the Internet :) to find this solution. Many thanks and greetings from Croatia!
@stephenjernigan10573 жыл бұрын
I was about to buy a new one and ran across this video. Took all of 10 minutes and it worked just like you said it would. Thanks man. You saved me $170.
@qwoodfin5 жыл бұрын
Thank you SOOO much for this video! Followed your instructions but also went ahead and lubricated EVERYTHING while I was in there (LOL), put it back together and works like a charm! So glad I don't have to babysit the darn thing anymore! I was ready to chunk it!
@doelbaughman19243 жыл бұрын
This was perfect! Mine had sand as well, but it caused my lever to get stuck in one direction. Thank you!
@jodyfeilermann63457 жыл бұрын
I am so happy to find your video. I have lots of sand in pool that accidently got put from filter. I thought it could be easy fix. On my third one, probably all the same issue. Thank you so much!!!
@trailerwookie4 жыл бұрын
I have a newer version of your pool cleaner and your instructions worked perfectly. Thanks.
@sophiameehleib52223 жыл бұрын
I knew what i needed to do but was afraid to take it apart and not know how to put it tohether without breaking it. so thank you for being the guniea pig and letting me watch, and all the little tips to knowing which way to know how to put it back... golden. thanks a bunch
@BrettMenzie5 жыл бұрын
In case it helps someone else, I wanted to explain what helped me solve the problem of my vacuum being stuck in one place. My Intex sand pump flow rate is 2,150 gph so it's plenty strong, but I had no movement. I own a Bestway pool (from Costco) that has one of those solar heaters. The solar heater is the problem -- it restricts the flow rate and therefore the vacuum wouldn't move. Once I removed that solar heater the vacuum started working perfectly and quick! Great and informative video nonetheless and I'm sure at some point I will be needing to lube the part you refer to in the video. Thank you!
@MrHuiostheou55 жыл бұрын
Tried this today. It was super easy and took about 10 min. The vacuum is running like a dream! Thanks for the vid!
@cryabinkin3 жыл бұрын
Thanks a mil! I was going crazy since it was working before. One thing to check before closing back up is the gears. Make sure they are aligned and spinning.
@CatalinTriff5 жыл бұрын
Thanks for the video! Extremely useful. I preventive greased mine before first using it, with silicone grease and it works flawless. Still, it's cleaning performance is mediocre but at this price, you are not going to get anything better. I will definitely repeat the operation while winterizing the pool.
@Erica1028816 жыл бұрын
Mine would move but only in one direction. I was able to take it apart because of this video and realize this part of the problem. Also learned that our pump needed to be on recirculate instead of filter.... now she goes all over the whole pool!! Thanks for posting!!!
@danielguerra44476 жыл бұрын
It does need to be on filter. Where did he say for it to be on recirculate?
@mommapaige42732 жыл бұрын
Wow…. THANK YOU… husband is going to try it right now. He took it apart yesterday but could nit figure it out. So fingers crossed your video will be the solution. :) I LOVE this sweeper when it works.
@martinscafidi3492 Жыл бұрын
Great video. I returned this back to Amazon for this exact same reason. Looks like I’m buying it again. Well done 👍.
@oliverbooker95283 жыл бұрын
What a great tutorial. Hate is not a strong enough word. Thanks so much for the great fix!
@johntanya46413 жыл бұрын
Thank you SO MUCH FOR THIS VIDEO!!! I got the same problem and thanks to you it works now! Thank you again! Very helpful! Good luck on You tube! 🤗
@dianelamendola18136 жыл бұрын
Dude thank you so much I was so made at mine and I was not accepting defeat. Your video worked perfectly thank you. I used a 3 in one lube and it worked just as great! Thanks much you saved me so much $
@aliciayoder87342 ай бұрын
Thank you for the helpful step by step instructions. Worked like a charm!!
@gannato066 жыл бұрын
This is a great video! Answered SO many questions!
@lexbolden3 жыл бұрын
Thanks dude for making this. Was driving me crazy. You're awesome!
@jeffeynon70894 жыл бұрын
Thanks for posting this! I didn’t have the exact same issue but your explanation of the inner workings helped me fix mine. I also have a love hate relationship with this thing :)
@selgman5054 жыл бұрын
What was wrong with yours and how did you fix it ?
@d.w.49753 жыл бұрын
Thank you for this instruction! I have to say that the valve even may not be moving hard (mine was easy going). I used silicon spray and now it works perfectly again.
@ashleya48526 жыл бұрын
wow great video! quick and to the point - didn't lose me with babbling or talking to people in the back ground etc like so many other videos!! thanks for the quick cleaning instructions - now that i have removed the wheels lol I can put them back on and clean what is the real issue!
@irresistible724 жыл бұрын
Just watched your video. Definitely trying this out- this evening! Thank you!
@jenniferr94046 жыл бұрын
Nervous Breakdown! Thank you I am going to do this tonight!
@djmisterbill2 жыл бұрын
Great video! I discovered after tearing apart my vacuum a couple of time and lubing all of the internal parts, that my problem was that my filter needed back flushing. After back flushing, the little Intex vacuum is trucking around the pool so fast, I’m a little worried it’s gonna break through the vinyl wall like Mr. Kool-Aid!
@robertscales12 жыл бұрын
Thanks for the vid! 10 min fix. Works great now and after opening understand operation better.
@qwen35794 жыл бұрын
Thank you for this video. I recently had a problem with mine. My valve was fine but the gears were stuck. So it led me to the problem.
@paulamcconville72952 жыл бұрын
Thank you for this video. Very informative and extremely helpful.
@lorik17552 жыл бұрын
Thats great. I love my vacuum and i knew one side was staying open or closed. It kept turning to right and up against wall. Im gonna tear into it now! Thanks so much!
@lorik17552 жыл бұрын
15 min later..its working!! In my case it was a pine needle keeping it from closing in flapper. A pencil and ajr compressor to get it out.it was stubborn.
@Haggisdog7 жыл бұрын
Thanks for sharing this. Great instructions and overview! I'll give this a try tomorrow!
@davidfields30984 жыл бұрын
Great video. This fixed my problem. The black jets on mine were clogged. Thanks bud 👍🏻👍🏻
@debbielake11724 жыл бұрын
Only 1 of my jets is spitting out water so only goes forward. Did what he said and it's not working.
@bronskitv33896 жыл бұрын
I will test it tomorrow. My cleaner doesnt want to move too,Thanks for your Tutorial :)
@Christine4nier5 жыл бұрын
Thanks for saving days (weeks?) of swimming this summer!
@Br33zE742 жыл бұрын
Thanks! My impeller was seized up & wouldn't turn the gears that in-turn flip the direction valve. Your vid was very helpful w/ troubleshooting.
@federicosalerno68364 жыл бұрын
Great video... just got vacuum from Amazon warehouse, the vacuum was returned to Amazon probably because" inoperative "( I assumed) , 50 $ great deal, but !! once installed .... not working and stuck only one side direction. Thx for your video, toked me 10 minutes and the vacuum pump works great now, found a lot of sand inside... Do not use whit sand filter!! Ore if so , use the additional screen for the water inlet .
@kchikhaoui4 жыл бұрын
Thank you. Just what I needed!
@KariK-gj1bx11 ай бұрын
Thank your u so much. I knew it had to be something fairly simple!
@danielguerra44476 жыл бұрын
Mine was not moving. Put a little lube and it’s working great again. Thanks for the video 👍🏼
@marthavasquez75472 жыл бұрын
Thank you for sharing I fixed my robot Watching your video
@JasonSmith-fr3gz4 жыл бұрын
Great review, and tutorial.
@Plan3tBob2 жыл бұрын
Love hat you made this vid. Helped me too. ty :)
@TheMangeGrain Жыл бұрын
Thanks. Some debris inside that valve are probably also the reason why my newer Intex ZX50 pool cleaner is not moving anymore. I'll open and check it and I'll lube moving parts.
@avagates20393 жыл бұрын
Great tutorial. Thanks for sharing.
@Azurewinged6 жыл бұрын
Great video!
@parker1ray4 жыл бұрын
I had a lizard in my pump. Lizard removed and works fine. One lizard was harmed in the fixing of the vacuum.
@ELCOMPAVILLA3 жыл бұрын
It worked, thanks to your video.👍🙏👌👍💯
@thergreenpproject41793 жыл бұрын
Thank you so much for this video!
@Linzicat4 жыл бұрын
Thanks so much! This helped a lot!
@BuckeyeNan Жыл бұрын
I hope you get this message/comment since it was 6 years ago you created this video. Your video is so helpful, your directions so clear, detailed. The camera angle is spot on. I was sad to see you didn't make any more videos since you are so good at it. Anyways, thanks again for helping us out. I would love to know how many summers this machine lasted you, or if it lasted a full year?
@perryortho16096 жыл бұрын
Wow I think you solved my headache , mine is brand new tried using it last year I was convinced that the screen was getting clogged in the two minutes it was down there, the results,buy something else.I can’t sell it doesn’t work. thank U thank U thank U how could they make something that is so defective but a simple fix.
@carlos987506 жыл бұрын
Great video my friend. Thanks
@TrashBagB5 жыл бұрын
Genius! Lifesaver! Thank You!
@TrashBagB5 жыл бұрын
Flip it upside down and push that flap to fill it with water and remove any air..
@stephenmitchell81984 жыл бұрын
thank you so much . great video . its working now . thanks
@FTMJ36 жыл бұрын
And at last ( the song ) i found the solution..thank you very much
@rafaelcolon20313 жыл бұрын
I'm so happy to see this video, I was getting frustrated already thinking it was broke. I will try to fix mines right now, let you know in a few minutes if that's the problem...
@rafaelcolon20313 жыл бұрын
It work just like in the video once I fixed it, thanks a lot 👍
@patricktheplumber54824 жыл бұрын
Great vid I was literally about to buy a new vacuum I’ll try this in the morning
@lousminetrastillo32573 жыл бұрын
Hey what was the outcome for you ??? Cause I couldn’t get mine running after this tutorial
@patricktheplumber54823 жыл бұрын
@@lousminetrastillo3257 mine worked had to get all the sand silt out of the gears put it back together and it worked I’ve had to take apart again since but it worked
@LloydMayes4 жыл бұрын
Awesome tutorial
@candiemunguia97963 жыл бұрын
Thank you! Problem solved 👍
@eduardosmith26484 жыл бұрын
Thanks, worked perfect.
@defleprulesful5 жыл бұрын
Thanks. Very helpful
@ThisMyHeartWork2 жыл бұрын
Bro!!! Thank you!!!
@jenniferl4861Ай бұрын
I’m here at 6 years later and hoping this saves me from having to buy that Aiper robot from TikTok shop! Lol
@acedelux34 жыл бұрын
Great. It works. Thank you :)
@savingstumps4 жыл бұрын
Nice, I just got one off ebay for cheap, so I'm gonna go clean it out.
@jonathansorroche32035 жыл бұрын
Thank you so much !!!!! 😃👍
@ianward51312 жыл бұрын
Brilliant
@MarySpin7 жыл бұрын
Thank you! Thank you! Thank you!!
@crystaln69885 жыл бұрын
we also upgraded from the pump that came with the pool (1600gpm) to a 2800gpm. it seem to propel it nicely, however, the back wheels werent locked up and it would creep up the wall and stop there.
@MichaelCCLARK-tt7nd Жыл бұрын
Thank You!!
@aesirmetalwyrksthed17135 жыл бұрын
I was hoping this was gonna solve my problems. Brand new vaccum, checked everything you did. After 15 minutes in the pool I still can't feel suction in the vacuum but the hose has plenty at the connection. Great video though thanks
@Bostoncoinsandbullion5 жыл бұрын
Aesir Metalwyrks The D i May be misreading this because you are saying suction. But this vacuum works off the return pool water. Needs to be attached where the water returns to the pool
@aesirmetalwyrksthed17135 жыл бұрын
@@Bostoncoinsandbullion I figured it out an hour after I posted the comment. This thing is crazy how fast it goes!
@dacerkeeley94366 жыл бұрын
Thank you sir!
@karendiehl59656 жыл бұрын
Aha, that might be why mine wont move either, plus the hoses leak terribly..I will try this thanks!
@waltergomez89306 жыл бұрын
Great video, but I have to admit I love the unit works great and for the price is a steal. My issue was the pump broke and push sand into the pool via the vacuum so it did get stuck because of sand. Thanks for the video.
@jchico239ify3 жыл бұрын
Thank You........
@Tunz2cruzby6 жыл бұрын
Great Trouble shooting!
@alneya424 жыл бұрын
Fix it Thanks 🙏
@samgoodwin62213 жыл бұрын
Thanks for video ! What capacity pump do you have?
@cryptowalk-37115 жыл бұрын
Ty sir👍
@susiegourneau47545 жыл бұрын
What setting do you put your sand filter on, when vaccuming? Recycle, Filter, etc...
@harveyyarvey6590 Жыл бұрын
I did everything the video said and mine was still getting stuck. My sand filter is 1200gph. So I turned on my old filter pump and ran it at the same time as the sand pump. It was working great after I added more pump power.
@robertovillagomez8618 Жыл бұрын
cool thanx
@crisglenmoog5365 жыл бұрын
Its work on hayward pump or just sand filter?
@carolhinson87795 жыл бұрын
Well hello thank you for the video it was very very informative. I tried everything you did, but when it hit the wall sometime it still get stuck; we clean out everything/ now my hoses that came with it leak some : where they are connected could this a problem , when I felt the end water at the end of the vac it coming out strong; I got it last year and it work great
@microondes15 жыл бұрын
Hi Carol, it seems I have the same issue, though it works a bit better after applying the OPs hints, it still gets stuck due to the tubes. And those are at three points (all the 3 same connectors) that are not tight and let out water. So the remaining pressure that actually moves the cleaner is reduced. As our pump is only slightly above the needed for the cleaner, this might be the problem. Have to look into those tubes how to get them really tight?
@TheMangeGrain Жыл бұрын
OK so no debris & no missing lubricant on my ZX50 : broken ball bearings. This tiny 3mm x 7mm x 3 mm thing controls the movement direction : forward or reverse (with only 1 wheel turning in reverse mode so the pool cleaner actually rotates). But when it's broken, forward direction won't engage. I'll get 10 new ball bearings in 2 days for 4.2 €. They're probably no more waterproof than the original part. No issue, they're easy and cheap to replace. NB : it's better not to immerge that pool-cleaner too long...
@lousminetrastillo32573 жыл бұрын
Absolute perfect turorial on taking apart and puttin back together I also removed my side rails but I didn’t get mine to work the pool I am trying to fix this for is full of destructive kids so I am sure there’s another underlying issue DOES ANYONE HAVE ANY TIPS ??