Hello from a very good customer of Dave Andrews archery in pa , Long time exclusive dealer of Mathews bows. Its the only bow i shoot these days . Last 20 years 😊 Mathews # 1 ❤

Was most curious for Mathews 2024 bow. The phase 4 completely changed bows. And it seems liked the lift is even better. That's pretty awesome

Thank you for addressing the strings! I was one of those customers going aftermarket for the last 3 bows. I got to shoot the demo models yesterday and put in an order an earth fade to black 33”. Now I’m going to be eagerly awaiting that phone call this spring. Thank you for doing what you do.

After shooting 1 brand for 27 years I made the switch to Mathew’s last year. Best decision I ever made. To all at Mathew’s thank you for all you do for us ❤

Atta way @elkshape! love seeing Washington State represented! Looking forward to shooting this bow and seeing how smooth it shoots.

I watched people shooting the LIFT at an archery shop. There was a guy shooting a Phase 4 near them. The Phase 4 sure sounded more quiet than the LIFT did. The LIFT they were shooting was all decked out with a stabilizer, etc. ( I think it was the factory demo setup sent to the dealer, fully equipped). The Phase 4 was equipped similar and it was easily more quiet. Also, the guy shooting the LIFT said the draw cycle was very heavy at the front end of the cycle. Very interesting! I have not shot one, just sharing what I have seen so far. My dealer said all of the LIFTs so far have come in really heavy in terms of draw weight. With a 70# mod they are drawing close to 75 lbs, etc. Another interesting point.

Would be freaking awesome if mathews did a tribute to a single cam with this riser

Went in looking for my first compound today and had my mind set on a Hoyt alpha x, shot it and just wanted to compare while I was there to make sure it was right for me… then I picked up the Lyft. One shot with it and I was immediately sold. Great job guys this thing is out of this world.

Been shooting a vertix and been wanting a lighter bow from yall and almost got the phase 4 since it was something really new but now sub 4lbs definitely a game changer in the mountains can't wait to get my hands on one

are the accessories still 300 dollars a piece?

Just purchased the Lift 33 fade to black earth last week after looking all over for this color. Mated with the UV slider and Hamanskea epsilon I love it

Switched from Mathew’s to Elite, never looked back . Elite tune ability and adjustability is outstanding.

I have a v3x 29 and will be getting a lift this week! So excited!

Just grabbed mine today. Excited for this season.

Zebra strings were greatest strings ever made. Perfect stretch and creep after each shot

That bow looks SWEET!

Sweet bow, but my Vertix isn't getting replaced anytime soon. It just works

This is insane. I need this bow.

Houston, we have LIFT off 🔥

It's truly an amazing bow!

Big changes props Mathews! Want to see a limb angle similar to the title on a hunting bow.

This thing is fire!!! It's early, but the LIFT Is for sure in the running for favorite bow of all time.

Sub 4 pounds is insane! That’s lower than carbon Hoyt bow territory.

How about positioning that cams into the more inner area where when it drops I don’t accidentally damage the cams. Or was it already done.

gonna have to start saving $ for this bad boy! I love my VXR but man this thing looks sweet!

I hear distributors say that it's a lot easier to move/sell bows when the draw lengths are adjustable. Having to stock mods, in a pia, many claim.

Ordered the lift 33 yesterday I’m very excited! Got the green ambush fade to black 😎. However they claimed my draw length is 2 inches shorter than I have measured a couple different ways. Will I be able to adjust it to give me that extra length if I want it? I’d hate to lose the extra speed if I don’t have to! I’m 6ft 2in with a wingspan of 75.5 inches but they claim a 29 inch draw. I had myself at 31. They charged me an extra $50 for an OD green twist so I’d hate to wait months and then it not fit me right! Thanks for any advice or knowledge you can give me on this issue!

💙my 🏹lift 29.5 so far 🎯🦌🔥🤙💣

Getting one today

I’m curious, do the mods make draw lengths equal if the arrows were equal weight? On all the mods? I always heard that a longer draw length will see benefits from a bow that a short one won’t. I am happy with my 27” draw length and your products. Thanks

would sure like to find this in left handed model some time before march of 2024

Might finally upgrade from my z7

LETS GO!!!!!!!!!!!!!

You guys should have put this on your website before now you had the title target bows on there I was encouraged to wait for the new ones to come out and went home looked on the website to see what they looked like and couldn’t get anything but the title bows I got anxious and bought my Phase 4 I’m super satisfied but I would have liked to see something about it on the website Best bows on the market bar none

Ive never been soo excited in my life lol bye phase 4 you’ll always be my first love

Still has the Chinese bearings. Same as my VXR. That FAILED in 3 months. And Mathews blamed it on customers over tightening the axle screws. 25 cent bearings on a $1400 bow. I’ve got a suggestion. Since Mathews likes to use 3 letters like VXR. Next bow… Bowtech. Superior engineering.

howd they outdo the phase 4 like this

All sounds awesome except it doesn't look like you have changed the grip, that's the only thing that keeps me from shooting Mathews is the grip sucks, until that changes I'll be sticking with my Hoyt, and yes, I have looked into aftermarket grips. I do hope that it changes because I really like everything else about it, but if it's not comfortable in the hand then I'm not gonna shoot it well. Very nice job on all the other stuff though, keep it up!

Just wondering if the 80lb mods will go into the v3x? Edit... upon watching the full video, I now realise the answer is no.

Please do this to the Atlas! I am a 🦍 and can pull 90+ all day at 33”.

Freaking home run boys

Ordered mine yesterday And I will not be running their strings It will have the Rouge R21 strings

i just bought a phase 4 though....

A carbon weight bow out of aluminum... 🤯

Imagine a carbon riser

The technology is pretty awesome, but it’s too bad that hunting has gone in a direction that is so cost prohibitive to the hunter. It’s becoming an elitist sport. I still go out in my grandpa‘s wool rich coat with his lever action 3030 once in a while to remember my roots. Hunting was to secure food for your family, not to prove how cool you were.

Nice bow but for $1429 +tax. No thanks. 😂 I’m not going to drink the cool aid. I cut my teeth with a Mathew’s but have moved on. The VXR is the only one I kept. Bowtech is where it’s at this year. Hell last years Ss34 still beats this one.

It's time Triax owners....

Idk man, i feel like its the same promotional video year after year with the same one liners.

the creed is still lighter

👠🏹👠🏹👠🏹👠🏹👠🏹

All good except the specific mods. Requiring new mods every time you want to modify your dl (due you changed your release or want to try a different anchor point) or your let off is so obsolete... I don't buy the "efficiency" argument; speeds are similar across all brands. Also: for when a replacement for the Atlas? That thing is 3 years old and lack the Stay Afield System, the integrated rails for the new stabs and accesories, the new cams ands axles... Everything!

Hello, dear Matthews official channel, I am a Chinese player from the other side of the ocean. I like your products very much. It is because your brand has archery. I just bought your new Matthews. As a result, the seller gave me the G of the saw module and my saw module is J, so I can't use it. I asked around that there is no J saw module in China. I would like to ask if you can contact me and send me a J saw module. Thank you very much.

So the just put LIFT instead of phase 4 ? Lol

🥵🥵🥵🥵

Guess I’ll stick with my Atlas since all of your bows with new technology only cater to shorter draw lengths…

Why can’t I have the limbs done in mossyoak bottomlands, why would you do that. I can have the riser In that color but not the limbs…..

Bummer! Mathews needs to go back to single limb solo cams, what they do best. These new dual cam split 8 limb bows are trash especially with the bad grip. Smaller brace height is garbage. Picked up an old used Mathews Z7 for this year and shoots like a dream and is dangerously smooth. Wish Mathews wasn’t going in the wrong direction with their bow builds!

Reviews sound all the same with every new bow release, lighter, faster, quieter, etc. We'll see when I test one.