Introducing The Sega Triple Bypass

Рет қаралды 127,730

4 жыл бұрын

The Sega Triple Bypass (3BP for short) is a board that bypasses the audio and video of Sega Genesis consoles, as well as a third "bypass" on some revisions, such as the DIN on the Genesis 1 and the headphone amp on the Nomad. Depending on which model Genesis you install it in, you can get a significant performance boost.
Please consider signing up as a supporter, or leaving a "tip": www.retrorgb.com/support.html
Official Reseller #1: bit.ly/uk3bp
Official Reseller #2: insurrectionindustries.com/product/genesis_triple_bypass_v2/
UPDATE: If you lift the RGB pins during install, you'll need to replace the pullup resistors: www.retrorgb.com/fix-for-all-rgb-bypassed-sega-genesis.html
Support the MDFourier project / 240p Test Suite here: www.patreon.com/aurbina
Main 3BP Page: github.com/tianfeng33/triple-bypass-Version-2
Mobius' Sega Nomad 3BP: mobiusstriptechnologies.com/product/nomad-triple-bypass/
Genesis Shirt: amzn.to/36vTR6p
Genesis 2 original vs 3BP comparison: www.retrorgb.com/assets/Genesis_2_3BPv2_Comparison.zip
For more information, please check out the main post: www.retrorgb.com/introducing-the-sega-triple-bypass.html
All equipment used to shoot this video can be found here: www.amazon.com/shop/retrorgb

Пікірлер: 473

@RetroRGB 2 жыл бұрын

UPDATE: If you lift the RGB pins during install, you'll need to replace the pullup resistors: www.retrorgb.com/fix-for-all-rgb-bypassed-sega-genesis.html

@alfredocalzadilla7251 2 жыл бұрын

So, should I connect each rgb line to ground through a 5.6k resistor on each line?

@Caddy666 2 жыл бұрын

Any ideas where to find tutorials on 3bp on a (pal va4)megadrive 1, but keeping the front audio jack / volume working?

@emerickscott 3 ай бұрын

I can't find any video showing how to do this. Nor how to install the 3BP without removing the RF and just running through the 9 pin. Also, one that shows how to keep the front jack for stereo (HDRV cable plug)

@niewazneniewazne1890 2 ай бұрын

Just a question, have you found any of those RGB bypasses and fpga HDMI mods plugging directly to the RGB output of the `graphics cards` of various consoles. To feature some form of de-dithering to simulate composite/rf color blending? Something that you would connect to a TV just containing HDMI. Something with some of that softness(roundness almost) and smoother gradients?

@natevirtual 4 жыл бұрын

Bob, thanks for being the ultimate source for all things retrogaming. You have no idea how much I value your input and effort.

@RetroRGB 4 жыл бұрын

Thanks so much for the kind words!

@natevirtual 4 жыл бұрын

@@RetroRGB Many of us feel the same way I'm sure! Keep on keeping on!

@GORF-wb4gl 3 жыл бұрын

I second this, Bob is the greatest source for getting informed on the widest range of topics, with the most in depth information available!

@RastaJediX Жыл бұрын

Facts

@ShadowEstina 9 ай бұрын

True story

@c0nk2879 2 жыл бұрын

Wow, that audio is like night and day! It's the purest a lot of us have ever heard that bangin' Sonic 3 soundtrack! Really cool project, Bob. I want one!

@Nintendo85 4 жыл бұрын

First mod I ever installed! Brought new life to my model 2. Love that you're doing this since RETRORGB is why I installed in the first place.

@RetroRGB 4 жыл бұрын

Thank you!

@kellykoesling9309 4 жыл бұрын

I picked up a Genesis 3 cheap from toys r us back in the day. Just keep it to complete the set. Had no idea anybody cared enough to make mods for it.

@bruceg22000 4 жыл бұрын

If it's VA1, you can mod that sucker and it will then be functionally identical to the first two models. It will then also be compatible with the Terraonion megaSD cartridge, which plays regular SegaCD images. The only thing it won't play is SegaCD 32X, as it's missing the expansion port. RetroRGB has pictures on how to tell whether a Genesis 3 is VA1 or VA2. After the triple bypass, it will have at least the same audio and better video capability than the best model 1 version.

@cbk12 2 жыл бұрын

@@bruceg22000 so im curious then. Would the cdx play the 32x/cd games combo? From a flash cart?

@emmettturner9452 2 жыл бұрын

@@cbk12 Officially you need to disconnect the Sega CD to play them from the cartridge, which you can’t do with a CDX, but I recall it was working anyway for someone (Krikzz?).

@cbk12 2 жыл бұрын

@@emmettturner9452 good to know thank you 😊

@rorykurek643 4 жыл бұрын

Thanks for the video, Bob. I'm constantly blown away by the amazing stuff that this community produces.

@DhinCardoso 2 күн бұрын

Tech in Brazil is really waaaaay behind - 4 years later I finally managed to put my hands on one of these, now is time to install it ♥ ty Bob

@NanoCresta1982 4 жыл бұрын

I could hear the difference even on my cell phone

@ZinhoMegaman 4 жыл бұрын

Same.

@shiucheling7452 4 жыл бұрын

yes

@bluestreakedladyshe-her8507 4 жыл бұрын

Especially Knuckles' theme!

@hackmiester1337 4 жыл бұрын

Bluestreak94 Plays Something Random yeah... Knuckles’ theme sounded like a broken paper shredder on that stock Genesis.

@0.Andi.0 4 жыл бұрын

Same

@Vanessaira-Retro 4 жыл бұрын

Amazing video as always. Lots of awesome love for the Genesis now a days.

@retrosoul8770 4 жыл бұрын

Yes finally indeed!

@silentfanatic 4 жыл бұрын

For anyone on the fence about this, I got a triple bypass installed last December and the differences were INSTANTLY recognizable. Absolutely worth the money.

@brockrock8898 4 жыл бұрын

Did you send yours in?

@donZeriouS 4 жыл бұрын

I can confirm hearing the difference in the quality. Awesome work! *subscribed*

@chutton988 4 жыл бұрын

Great video. I've been wondering what this project was and this explanation was really interesting.

@user-wu6cf6yv6h 4 жыл бұрын

I've actually been using your site lately because I've been looking at buying an old genesis and this video comes up! It's a sign haha

@retrosoul8770 4 жыл бұрын

Keep the MDG alive, super awesome work.

@fujiwaratofushop 4 жыл бұрын

I have this mod installed on 2 of my systems and is well worth the time & money. One of the best mega drive mods out there IMO

@SolKnightt 2 жыл бұрын

Really cool to know! It's beyond my skill/patience but I still love learning about these mods.

@phazonclash Жыл бұрын

Coolest thing I've seen this week, by far. Macho Nacho's latest video sent me here. Subscribed

@DanielLopez-up6os 4 жыл бұрын

The ultimate sound capabilites, IMPROVED!

@JamesTaylorMain 4 жыл бұрын

On the Genesis 2, I can obviously tell the difference. The 3BP sounds cleaner than the original audio output.

@AlexvrbX 4 жыл бұрын

Not all Genesis Model 2's are bad, and and not all Genesis 1's are good. I've got a VA4 Model 2 and the audio and video are pretty damn good already.

@SolidSonicTH 3 жыл бұрын

I'm such a purist. Hearing them side-by-side makes me like the original audio. That grungy sound with the occasional clipping is more...Genesis-y to me.

@AceTrainerX3 2 жыл бұрын

@@AlexvrbX Yep, and the VA7 model 1s sound just as bad as the VA0/1/1.8 model 2s. It's just not as cut and dry with the Mega Drive/ Genesis, but now the 3BP can even the playing field.

@dumbkoffcrow974 4 жыл бұрын

I've been reading about this on your site, and am thankful the installation is easier on non-Gen 1s. Maybe when lockdown is over I'll find a space to work on my consoles with this.

@Bearcade 4 жыл бұрын

Wow, I’d love to learn how to do that mod to my model 2. That audio is a huge improvement.

@anthonyterry8162 4 жыл бұрын

Im ordering mine this week. Can't wait

@snickersvickers22 4 жыл бұрын

Great informative video as always Bob! I found out about the Triple Bypass from your website some time back. Since then i have tried it (and Voultars RGB) on multiple MKI and MKII PAL consoles. As you can imagine i got different results each time both in audio and visual. My main objective was getting rid of the jailbars. With many hours of tinkering I found on the MKI VA4 i ended up just lifting the sub carrier and using Firebrandx's audio mod got the best results (on that specific board) I prefer the colour output of the CXA. MKII I used the triple bypass on two versions one UK-PAL and one ASIAN-PAL. The jailbars was 99% gone on the ASIAN model but around 80% gone on the PAL model. Now here's whats more interesting, putting them through an OSSC jailbars are a lot more noticeable but through a Framemiester you can barely notice them on any model once the mods are installed or even the stock CXA. I'm still on the hunt for the perfect Sega Genesis/Mega Drive board that has the least noise even after trying it on more than 6 different boards. I'm trying to get hold of a Brazilian MKIII and a X'Eye to see how those results turn out :)

@Storm_. 4 жыл бұрын

Thanks Bob, you are the best educator for retro tech, you are awesome!!!

@RetroRGB 4 жыл бұрын

Thank you!

@MorrisChannel4 Жыл бұрын

Holy hell, the bypass even fixes the EQ! Amazing

@acuraintegrar5 4 ай бұрын

Pretty sweet! Great vid!

@sonicmariodonkeykongzelda8466 4 жыл бұрын

Like this product. Hope you're well and safe.

@martinauplish5320 4 жыл бұрын

Excellent narration.... Pleasant to listen to.. Unlike some other vids...

@MixologistMilo 4 жыл бұрын

Great video! Have one done each on CDX, Gen 1 and 2, highly recommended

@Sayajiin2 4 жыл бұрын

What a great video! Thank you very much Bob!

@BeyondEntertainment_ 4 жыл бұрын

HypeBeast Bob with the info 🤯 🔥

@DeceptiveCobras 4 жыл бұрын

you can hear the low tone hiss in the Original, if I get back into collecting Classic Consols I will Look at getting me a 3BP for sure thank you for showing the internet with this, I also remember the old days where you could overclock a Gen 1 to get more Frames in Sonic and Streets of Rage etc as well as Streetfighter 2 etc I miss the old days of Consol hacking..

@joshmartimez2235 4 жыл бұрын

I could hear a difference on my cell phone. This is a great upgrade option for those that want to do it. If i want a clean video and digital sound signals on an HDTV I play Genesis games with the Mega Sg.

@heavysystemsinc. 4 жыл бұрын

Big ups to my man cruzlink. Hope you doing well, buddy! I still got the Virtua Stick!

@GreyCartridge 4 жыл бұрын

I know this is wildly off topic from the video, but you’re looking great! Most of us in quarantine are gaining weight rather than losing it, so keep up the good work. :)

@RetroRGB 4 жыл бұрын

Thank you!

@LangersVW 4 жыл бұрын

Awesome video 👍🏻love the Samus poster

@RetroRGB 4 жыл бұрын

Thank you!

@LangersVW 4 жыл бұрын

RetroRGB it was your video that got me on the hunt for the RAD 2x cable for my SNES but trying to source one is a nightmare

@TheDeltaspirit 4 жыл бұрын

Wouldnt a model 1 genesis benefit more from a rgb bypass (non triple) and firebrandx’s M1 mini mega? I’m about to mod my Model 1 and wondering if I should triple bypass instead?

@emmettturner9452 3 жыл бұрын

3:30 - Where can we find the wire routing that Jose Cruz validated? I don't see the validated wire routes on the Github or the 3BP page on RetroRGB. Thanks!

@gameandbros5462 3 жыл бұрын

7:23 You can really hear the difference with the Hi Hats! Sounds delicious.

@tigerdefensesystems 4 жыл бұрын

I have a genesis model one from my childhood first console and a CDX... How does the CDX and even the new Retro Genesis Mini compare in sound to this mod?

@arcadeperfectreviews2653 4 жыл бұрын

Cool I already use the HD Retrovision wire on a high quality CRT and PVM so I'm thinking of picking this up

@bobbyberetta4206 4 жыл бұрын

Love the Rust In Peace V in the back🤘

@RetroRGB 4 жыл бұрын

Thank you!

@GTArajgaming 4 жыл бұрын

The only downside with my mega drive II is that I got one instance of slowdown playing sonic 2 on co-op with a buddy.... is that like supposed to happen? I don't remember that from back in the day on my og mega drive 1 ( which I no longer have)

@raym4694 2 жыл бұрын

@RetroRGB what size/value of caps did you replace for the voltage regulators on your model 1? While you were talking about the caps you added, you showed those caps and was it necessary to replace those caps?

@_MJ07_ 2 жыл бұрын

Ohh man, the Pete Sampras Tennis music! That takes me back to my childhood playing with my dad and sister.

@thatguy4632 4 жыл бұрын

You are awesome. Keep up the awesome work!

@RetroRGB 4 жыл бұрын

Thanks very much!

@chrisfratz 4 жыл бұрын

I think I'm going to get this installed in my model 2 at some point

@raymxslappedyall3660 4 жыл бұрын

triple bypass kept my dad alive

@ndk1537 4 жыл бұрын

did you notice a difference in audio/video quality

@EposVox 4 жыл бұрын

Now I just need someone to install it for me!

@mansen5485 4 жыл бұрын

8bitmods.com

@emmettturner9452 3 жыл бұрын

@@mansen5485 I'm sure they're great but it sounds like the pigeon-holed themselves out of 16-bit console work with that name. ;)

@protoconofsorrow 4 жыл бұрын

Loving this man's rust in piece v in the back ground

@RetroRGB 4 жыл бұрын

Thanks! I fully customized that one :)

@ZinhoMegaman 4 жыл бұрын

I really would like a more "easy route" to all this. I made the RGB mod on my N64 but when I look at this TBP for Genesis I always think it's a mess of cables and other parts. And of course, there is the availability problem in my country, Brazil, always a thing to worry.

@1337Shockwav3 4 жыл бұрын

I'm okay with the wiring schemes, but hell ... soldering leads directly to lifted QFP pins is a recipe for desaster. I don't mind doing so myself, but I can see a bunch of ruined consoles due to that aspect.

@vadnegru 4 жыл бұрын

@@1337Shockwav3 many mods done like that

@haraldhimmel5687 4 жыл бұрын

Yeah.. Cool as hell from an enthusiast viewpoint but essentially you are reworking the board.

@cbk12 2 жыл бұрын

@@haraldhimmel5687 ya feel the same. At that point you kinda not playing the og console kind of with bypassing. Its enough to bypass the audio.

@emmettturner9452 2 жыл бұрын

You can literally build it and provide it to other Brazilians yourself! That’s the beauty of open source. Components are widely available even during the industry-wide parts shortage. Another benefit of being open-source is that you can adapt it to a more “easy route” if you want which probably means making versions tailored to specific console revisions. One example: A change that made bottom installs easier on the Model 2/3 made the board hit the DIN on the Model 1 when replacing the RF modulator, which is one of the things that can be fixed. Japanese consoles have no RF modulator to replace anyway so you could interface with the original DIN and pipe stereo to the headphone jack. The 3BP also needs 5.6k pull up resistors for lifted pin installs which is probably coming to the universal design. If you’d rather use the pull-ups on the board and leave the pins down you could design it for that.

@davidtames6081 4 жыл бұрын

RetroRGB - So which Genesis console gives the best picture and audio after the bypass? Also what about the Mega Drive in Europe, do the European models have the same issues as the Genesis models and will they benefit from the mod and can I get a 60fps mod as well?

@Anemptybox 4 жыл бұрын

Hello Bob, I have a off topic question. One of my CRT TVs has too much overscan when playing NTSC games (I live in a PAL country). I managed to find a manual with information on how to access the service menu. With the menu, I can get a horizontal line to show across the screen but I can't actually do anything with it. My question is if my TV is one of those that you have to physically open up to change these settings, if you happen to have time to look at the manual here (page 9 for service menu): www.eserviceinfo.com/downloadsm/19192/sanyo_ce28SN3-c.html Page 7-8 makes me believe you need to open it. I'm definitely not comfortable with opening it and I'm aware of the risks, I'd just like to know if I might be doing something wrong with the service menu. Thanks a lot for your help and all of your videos.

@healthtips14097 4 жыл бұрын

Hey great video as alwaysl Let me make a question. What do you think about the audio quality of the Genesis core in Mister Fpga? Wich filter do you suggest to use on it? Im using the no filter option and the sound is pretty clean.

@RetroRGB 4 жыл бұрын

Genesis audio on MiSTer is AWESOME; The team uses MDFourier to make sure it's accurate. Filtered vs unfiltered totally depends on your speakers and your ears...there's no right or wrong answer, it's whatever you like best :)

@visionop8 4 жыл бұрын

I see that Rust in Peace Dean! Very cool!

@RetroRGB 4 жыл бұрын

Thank you! I did a bunch of mods to it and it's now one of the best guitars I've ever played.

@jkeelsnc 3 жыл бұрын

Actually, I had the Gen 1 and used the stereo headphone output to the rca inputs on a stereo which was nice (adjusted the volume level down to prevent clipping distortion on the RCA inputs). I also had an RGB monitor with a custom wired cable from Redmond cables that used the RGB output to operate with RGB display on the monitor (with this there were no jail bars on the monitor). It was a huge improvement over using only composite or esp the RF output. Razor sharp with very nice sound. This is an interesting mod though. The Genesis definitely benefits dramatically from an RGB output.

@hughjanus6975 4 жыл бұрын

I want one of those broadcast monitors, they look very clean. I love my crt, but I would love it even more if it was clearer!

@Akutsu260 4 жыл бұрын

any other store that sells the current version? it seems insurrection's shipping is pretty limited, and VGP sells an older version

@H2Oredfirefox 4 жыл бұрын

exact model of SEGA Mega Drive I saw at a car boot sale about a year ago in my hometown it had that exact same port on the back of it I always wondered what it was for I wish I got hold of it before some else did

@JohnnyFnG84 Жыл бұрын

Great video. I LOVE your Metroid poster! Where did you get it?

@RetroRGB Жыл бұрын

Thanks! I got it on eBay in 2015 (ish). It's a reproduction of an original. You should be able to find one on eBay or Etsy.

@TheCoolDave 4 жыл бұрын

Where is a soild set of directions on how to install this on a Model 1, any worries/concerns about using a Model 1 Sega CD ?

@pixelotix 2 жыл бұрын

I grabbed a 3BP chip and now I’m having trouble locating actual installation instructions for a Model 1. I can start on with the mini DIN and board install, but this video and the post on RetroRGB all are general info, which isn’t quite enough for the resistor additions and wiring. Any suggestions on where to get instructions?

@bwood2572 4 жыл бұрын

Does this device use a YM2112 or a YM3438? The problem with the mega amp was it used a YM3438 so the audio timing was wrong on many games.

@toffeeFairy 4 жыл бұрын

nice video i might consider getting one and trying to mod it myself, as mega drives model 2 are dirt cheap in Europe

@pam8352 3 жыл бұрын

my megadrive 2 with the ccam mod has buzzy audio, but i think it is related to the powersupply that had 0.5 volt more than it should.

@KJImpakt 4 жыл бұрын

There was only one system that I could think of that wasn't either thought of or simply wasn't covered in this segment. The CDX, portable Genesis/CD w/CD player capability. Not many people remember it.

@MobiusStripTech 4 жыл бұрын

The custom CDX board is not done yet. So there isn't much point in talking about.

@JeffersonSoaresSP 2 жыл бұрын

Hi Bob! You are the only guy I trust 100% on Bypass information so I can change my Mega Drive. I would like to know, honestly, what is the best bypass card for RGB on Mega Drive, model 1? Warm regards from Brazil!

@ez054098 4 жыл бұрын

I assume if you have a Mega Sg, the sound isn’t a problem?

@atrocity3010 2 жыл бұрын

I have a Model 2 and a Hi-Def Graphics Model 1. Switching between the two, my Model 2 has substantially worse audio quality. A good track to test this on is the Stage 1 bar music in Streets of Rage 2. On the Model 2 it sounds terrible, and switching over to the Model 1 the difference is immediately noticeable. I'm probably going to get a triple bypass done for my Model 2 as it's the one I grew up with (never knew the Model 1 existed until later in my life), plus the Sega CD I have is the Model 2 version. Thanks for the great video!

@theincrediblehark 3 жыл бұрын

Need a little help with this... I recently bought a genesis 1 with triple bypass and with a 32x i'm getting very low or no sounds coming from the left channel. I reflowed my solder points and checked connections. For example in virtua fighter all voice samples are only coming from right speaker. However in virtua racing all are coming from left and right. any idea on how to fix this? Does the 32x only carry mono audio for some of their extra sound effects and samples? I have the same 32x and cables connected to my genesis 2 with mega amp 2.0 and have no issues at all. If it comes down to it is there a way I can re-enable the headphone jack? I believe its a VA5 or VA6 model 1 genesis. I really want to use this for the rgb bypass but the low audio is giving me a tough time.

@TheArtOfB 4 жыл бұрын

Great content. Awesome shirt!

@RetroRGB 4 жыл бұрын

Thank you! I linked to the shirt in the description if you're interested.

@TheArtOfB 4 жыл бұрын

@@RetroRGB 🤘

@sergiocecilio5938 2 жыл бұрын

it's the first time i see someone with the same model motherboard as my megadrive model 2. It's a smaller motherboard than usual.

@ToxcynArcade 2 жыл бұрын

Couldn’t get VA2 sega cd audio to work. Tried using 3 different sets of jumper wire but nothing still. Just cd audio not triple bypass. Not sure why because he solder points are good.

@retrosean199 4 жыл бұрын

Now just need to find a local mod shop because there's no way I could pull off something like that on my own...

@WrestlingWithGaming 4 жыл бұрын

This really made me want to get a Genesis 3.

@RetroRGB 4 жыл бұрын

Yeah, if you only knew someone that could just send you one? Maybe fat guy? Likes beer? ...nah

@WrestlingWithGaming 4 жыл бұрын

@@RetroRGB lol. I have 2 Genesis laying around as it is. But I appreciate it.

@Clay3613 4 жыл бұрын

Would these mods be cheaper than an Analogue SG? EDIT: Yes it is, though not factoring in $40 or more on cables.

@enthusiasticgamer88 4 жыл бұрын

Awesome. I'd be curious to see Mega SG vs 3BP'd audio that would be interesting.

@Shinobi006 4 жыл бұрын

This.

@bluestreakedladyshe-her8507 4 жыл бұрын

HARD SAME

@T1C 4 жыл бұрын

Wait, so the model 2 isn't supposed to sound like that?

@BenHyuga 4 жыл бұрын

How does this fare with the jvc x eye an official sega genesis

@djgamble07 2 жыл бұрын

Great video. FWIW I'm no audiophile (I hate people being pedantic about nothing) but I certainly noticed issues with my MD2's audio. After installing a Mega Amp 2.0 (which I think is the same as the audio part of the 3BP you're talking about?) everything's cleared up significantly. Personal opinion but on this note, I think the MD2 is under-rated as I get stereo from the original din and no jailbars. I also like the style of the MD2 as I had one as a kid. Thought I'd mention this as everybody on forums told me to do the 3BP (most don't seem to appreciate what the Mega Amp 2.0 is or why I wouldn't want to use the full 3BP in an MD2). I'm glad that I was able to get away with the simpler, single mod as each bit of fiddling/soldering comes with a level of risk.

@AceTrainerX3 2 жыл бұрын

I'm guessing it's because the Mega Amp doesn't really fit in with MDFourier, and isn't as close to original Model 1 MD sound as possible. The 3BP uses a slightly different circuit, which takes MDFourier analysis into account. I'm also the kind of guy who'd rather just bypass the audio on the MD2's as well, as I don't want to lose composite video and the model 2's RGB is already pretty good.

@joshuaharper4439 3 жыл бұрын

Hi there where can I get this item and who could I get to install it and upgrade my Sega Genesis model oneto also get rid of the gel bars are greatly appreciate any info and help thanks

@JorgeRodriguez-sl8te 4 жыл бұрын

Amazing! I'm going to buy myself for model 1 and 2, but ... Does this come with the installation instructions? Will there be a "how to install it" page? Thank you very much for the information you always provide us! Excellent video!!!

@RetroRGB 4 жыл бұрын

Detailed instructions are coming, once we launch the wiki. That got delayed cause of everything going on ;/ At the moment, you can check out Jose's twitter page and just copy his installs: @cruzlink2

@zdthn 4 жыл бұрын

RetroRGB that’s what I do. I wish twitter had a better search function.

@jhiggins 4 жыл бұрын

I love the way that Sony TV looks! What model is it?

@RetroRGB 4 жыл бұрын

KV-13TR24

@bruceg22000 4 жыл бұрын

Bob, is there going to be a Triple Bypass installation video or more detailed website instructions for either a common model 2 Genesis with lousy sound or a model 3 VA1? Right now I just see pictures on your website, and I know there are some pins that require lifting and/or traces that need cutting. If you are going to do it, I'll buy and donate a triple bypass chip if that helps. Personally, I'm going to find a Genesis 3 VA1 on Ebay and try this myself.

@RetroRGB 4 жыл бұрын

All the documentation will be released with the wiki...which really is coming. Everything going on really slowed that down though :(

@reggielee31 11 ай бұрын

I have genesis ver1. After install 3bp it has larger buzzing sound. I don't know how to fix it.

@Tense 4 жыл бұрын

How does this compare to an X'Eye outputs?

@zeroxdogma 3 жыл бұрын

Hi, if I add 3BP to the original fat genesis I’ll lose the front headphone jacket function?

@matieregrise7566 2 ай бұрын

Hello, once installed, when I put on a game that has mono sound, for example "flashback (PAL)", I only have the sound in the left speaker, is this normal?

@judsonrodriguez8328 4 жыл бұрын

A bit confused I have got several model 1 and 2 genesis. So which one provides best quality after bypass ?

@juanperez-ni2iw 4 жыл бұрын

Youll have to check the serial numbers to find out which 1 does what.there is lists on line

@13lake 4 жыл бұрын

When you say, "sever and isolate any existing connections to the DIN", how do you do that? The DIN has to stay soldered to the Genesis PCB right? Sever what connections exactly? I've yet to find a tutorial showing good pics of that particular solder job.

@RetroRGB 4 жыл бұрын

Sever the traces on the motherboard leading to the DIN. We're working on good documentation now. Should be up the moment the wiki launches.

@TengoReuma 4 жыл бұрын

I have both a PAL VA4 and VA6 which is modded to death, would the VA6 benefit from the tryple bypass? I dont notice jailbars using RGB I always thought that was a problem for the people that use composite

@RetroRGB 4 жыл бұрын

Just my personal opinion: If you're happy with your Genesis in its current form, leave it as-is.

@Stendal_ 4 жыл бұрын

Never was big on Genesis (didn't grow up with it) but projects like these make the proposition of getting one much more enticing.

@brunorabelo7564 Жыл бұрын

Is the end result always the same, regardless of genesis? If I install on a va1, va2, va3 or va4, in all of them will the final image always be the same, or does it vary? The better the board revision the better the result with the mod?

@RetroRGB Жыл бұрын

If the install is done correctly, the video will be about the same. The audio should be identical, with the only difference being the difference between original and llater model sound chips.

@StephanieHua 4 жыл бұрын

Question, can this board + 9-pin DIN be used to modify a Turbo Grafx 16?

@RetroRGB 4 жыл бұрын

It would have to be modified. You'll want to look into voultar's TG-16 solutions.

@Mickocarbomb 4 жыл бұрын

I dig that a fellow metal head is a gaming need like me too. Also, nice Dean VMNT Rust in peace model. I've only got one artist sig and it a way low end model, it's a Washburn 332 B dimebag darrell guitar.

@retronickmusic 4 жыл бұрын

I've always wanted a Xeye. If only for the fact that the cd is married to the main unit. I think it still looks slick today.

@VulpisFoxfire 4 жыл бұрын

How does this affect the audio on a Sega CD setup (a Genesis 2/CD 2 in particular)?

@RetroRGB 4 жыл бұрын

It doesn't affect it at all: Just get the audio from the Genesis 2's DIN and the Sega CD audio will be routed through properly. Just like normal: www.retrorgb.com/segacd.html

@AccessDEANied 4 жыл бұрын

no spec of dust on that model 1. amazing.

@Clay3613 4 жыл бұрын

Finally a KZfaqr fully cleans their tech before filming!

@touche112 4 жыл бұрын

Does the 3BP installed in a Model 1 eliminate the need for the mixing cable when connected to a Sega CD?

@RetroRGB 4 жыл бұрын

Yes, after installing the 3BP, it's recommended you just get the audio from there. Also, you never needed the mixing cable...Sega made it very confusing: www.retrorgb.com/segacd.html

@stephenprice8825 4 жыл бұрын

My model 2 sounds just like that, I thought maybe my 32x was the culprit so I recapped it but it didn't fix the issue, same with the video interference I was getting when using the 32x. I even did the other 32x capacitor upgrade to replace those other 2 caps for noisey video and not only did it not work but now my 32x has a yellow hue on 32x games, so if someone knows something about that and could help that'd be awesome.