Please subscribe to my channel thank you 😊

The way you use tools I am surprised you have all your fingers

Thats 8 minutes of my life I'll never never see again.

My good man, I would like to take a moment to reflect on your total disregard for your own safety whilst using handheld tools, firstly never hold an item that you are about to drill in your hand. secondly use the correct size drill so that you do not have to ream the hole for your next piece in the project to fit, thirdly, ensure that your drill bit is sharp and does the job with ease, fourthly never use a hacksaw blade held in your hand, it actually has a frame to secure it in, fifthly never pull a hobby knife toward yourself when cutting objects you are holding in your other hand, it is a sure way to cut right into your tendons rendering your use of those appenditures useless.

It would be nice to explain your actions. Especially at the very start of the video. The goal, the task origination, plan of the work. What are you doing and why.

Just what I've always wanted to do, weld 2 razor blades together, forget it

Столько ненужных манипуляций, и потеря времени на производство и просмотр этого бреда!!!

So, guys, don't throw away your old razor blades because you can always weld them together and then you can, err...

I watched the first 5 seconds of the video and went straight to the comments and you lot didn't disappoint at all.

Have not seen one of these that are worth the time! I just like to read the funny comments.

I followed this video to the letter, and I'm mighty glad I did. My morning shave is done in half the usual time, which means I can now watch even more of these videos. Thank you!

ПоМоемому, автору, самое важно, это изоЛентой приМотать провод к деревяшке ..

Yes, holding a piece of wood in your hand as you are drilling it, is a million dollar idea for the medical industry. The battery in the drill and cutting the top of the battery off with a hacksaw blade, held in your hand is brilliant.

Вижу практическое применение такого "сварочника" в замене элементов в аккумуляторах шуруповёртов всяческих...там несколько аккумов между собой последовательно соединяются стальной лентой, которая чуть толще лезвия бритвы - как раз подойдёт

Dude,you need some decent tools to work with before you hurt yourself.

Man kann nur staunen, das dieser Mensch noch alle seine Finger hat.

When you absolutely must weld two razor blades together.

Actually, folks this is an excellent general use spot welder. Very useful for rebuilding rechargeable battery packs for power tools and such. Individual tabbed cells available online, but need to be welded in a way that doesn't damage them.

For me it was helpful. I’ll definitely will try to make it. Thank you for sharing with patience. Regards from Japan

It's an imaginative assemblage of various implements to get to a definite result, it;s an interesting proof of a concept, but what was the power source you held up there for a few seconds? it's obviously got a little bit of power behind it, but is that power unit some discarded unit you are making use of for this Mini-mini-welder? The photography was fine, but the presentation definitely needed some more instructions and descriptions of things. It could be followed well, but some captions would have been a help.

Ah so that’s how you do it! Always wanted to weld razor blades together ( don’t really know why).

That’s 8 minutes of my life I’ve just wasted…

I just made a giant razor blade now all I need is a giant razor blade holder and a giant box of plasters.

Praise Comment: "This is truly innovative! Turning used batteries into something useful is both eco-friendly and resourceful. Great job!"

Ingenious use of easily found materials to create a pretty sophisticated tool. I've just acquired a MIG welding outfit for larger stuff but was wondering if I could spot weld small stuff and indeed this is a nice compliment to my arsenal. Cheers.

That was a lot of trouble to go through, when you could have just superglued the razor blades together! 🤔

maybe save $5 - $10 for a Soder tool but the comment entertainment is priceless

Now you've made one of those mini spot welders you'll be well equipped to securely attach wires to bits of metal to your heart's content. 👍

Ok here's some positive feedback that will be worth taking on board We have been using the very same principle to rebuild damaged car/truck battery poles for years / an old French mechanic showed me . Clamp a piece of flat steel in the gap of a spare terminal / +ve or -ve whichever is required , hook a jumper lead to the battery's other terminal / do not do this with a hot battery , cover it with a wet rag , never had one explode in 40 years . I actually use an arc air gouging carbon now , however a Big Jim torch 6 v battery has 4 good sized carbon rods inside . Okay . wire brush what is left of the terminal , make sure you have a stick of 50/50 plumbers' solder on hand .Touch the carbon rod onto the damaged terminal and carefully melt the lead down to meet the mold - too hot and it will all run out under the mold , (yes I did that the first time) the carbon will heat very quickly so gently as you go, now use the red hot carbon rod to add the solder into the lead surface puddle and build to original height , let it cool and you're back in action . Wear safety glasses!! Cheers NC

"This video serves as a reminder that innovation knows no bounds. By repurposing used batteries, the inventor demonstrates that with creativity and determination, we can solve everyday problems and make a positive impact. It's a testament to the endless possibilities of human ingenuity. Let's strive to find inventive solutions to challenges big and small. Thank you for sharing this inspiring message!"

Если вставить это ваше изобретение на в антеное гнездо телевизора, а в розетку электрическую на вашей стене, то эффект тоже будет потрясающий, ГАРАНТИРУЮ!!! 😁

Dullest drill bits I've ever seen, and the luckiest fingers. But thank god I now know how to weld my used razor blades.

I'm heading straight to the store to buy two razor blades...

Great ingenuity....but now that you built a long razor...what do you use it for?

Greetings from Australia -- a little spot welder - you beauty. Suitabl to weld lug battery cells??? Thank you

A spot welder. When I was a kid I made a soldering pencil that was powered by a 12V car battery by filling a metal bullet shaped pen cap with carbon granules.

Hallo Deven. Auch ich hatte schon einige Rückschläge, hatte mich aber immer wieder aufgerafft und von vorne begonnen. Ich habe deine Worte verstanden und sie haben mich inspiriert noch was zu machen. Ich freue mich schon auf die Zusammenarbeit mit dir.

As an amateur radio operator who makes radio kits this is going to me huge for me. Thanks for not only saving me a LOT of money (spot welders are usually over $100 USD but giving me another fun project to make.

Back in the 60s I used to use D cell rods upped the voltage and made carbon arc welders that packed a ton of heat/light. It can be used to weld but don't try it, one mistake could be your last. But many welders can bite you if you're not sure about what you're doing. It was the same principle as BLG has shown you here.

Can you post a picture of your face after using your spot-welded double razor blades to shave with.. 😂

Excellent and original ideas! I'll immediately try to make the graphite welder from 1.5v batteries.

Wow you just reinvented the wheel

Да Класс! Этого я не знал. Спасибо за. науку. Браво!❤❤❤❤❤❤❤❤❤❤❤❤❤❤🎉

Excelente esa soldadura por puntos!!

What a brilliant way to repurpose used batteries and contribute to a greener future! This video not only showcases a creative DIY project but also instills a valuable lesson in environmental stewardship. By turning waste into something useful, we can all play a part in conserving resources and minimizing our environmental impact. Thank you, Inventor BLG, for sharing this insightful and inspiring content. Let's all strive to adopt a mindset of innovation and sustainability.

Thanks for sharing, great idea

I'm usually pretty harsh on what many consider worthless videos. This is not one of them. By spending the time to complete these small projects, you learn the very means by which such equipment works. I spend an inordinate amount of time dismantling used equipment to gain a better understanding of how they are constructed. It's helped me my entire life. Keep sharing. Never mind the negative comments by "armchair quarterbacks" who probably spend more time playing computer games and surfing porn. Thank you.

Some of the comments here make me really wonder. Do people really think this - mini welder - is made for welding razorblades and the likes together? If one is a homeworker and needs a lot of very small and little welding. It is a good idea to have such thing. Sure it will take time to make one. But isn't it also the fun - I can do it myself instead of buying everything -?

Ya te comente mui ingenioso tu teabajo.en cuba trabajé de tornero muchos años.y me gusta los inventos.lo q me llamo la atencion fue que con pocas herramientas mira lo q logras.felicidades .

After watching this video, I am really surprised he doesn't have cuts and gouges in his hands and fingers!

You are so smart, your content ideas are quite unique

The only person in the world who tightens and loosens his screwdriver by hand. But hey, it's been a while.

Inventive Electrical!!! thank you! welding in any form is interesting. Detailed vid!

Well, that was eight minutes I'll never get back.

Well that's eight minutes of my life I wont get back.

Soudure sans métal d'apport . . . Bravo !👍

Do they still have carbon rods in cheapies? Good for fixing squealing disk brakes.

I was quite surprised to find that at the end of this video, you appear to still have ten fingers. I always said, if you're not living on the edge, you're just not living. By the way, how many eyes do you have right now? Just curious.

I think you worked in a machine shop that i used ONCE ! Rube Goldberg would be pleased.

Muy buena idea, pero mas lenta que el caballo del malo. Un poco mas rapida seria Genial. Un saludo.

Great idea looks like an excellent light welder not to mention reusing batteries!

Как всегда, они додумались через сто лет Изобретение с очень длинной бородой😂

8 minutes of my life I'm never getting back.

Видимо запасные руки есть..., при отсутствии мозгов. Берегите себя ! Наглядный пример как нельзя пользоваться инструментом.

Your drill bits are really dull.

I'm surprised you could afford super glue and electrical tape!😮

Incredibly dangerous technique drilling that piece of wood. Surprised it was shown.

To be perfectly honest, I'm not sure exactly why I'd want to weld two razor blades together.

That was a great and inventive way to build a spot welder. Thank you!

I became obsessed with this channel

I can’t wait for the sequel where our hero welds 2 cats’ tails together

I'm not sure, but I think that just might void the manufacturers warranty on everything seen in this video.

I like it. This is absurdism at the level of Monty Python. This is high level humor folks. Try to understand that!

Interesting - But I doubt I will ever have the need to weld two razor blades together for any reason.

1) Tell them what they are going to see -- how to make a spot welder 2) Show them -- make the thing 3) Tell them what they saw -- metal spot welded together with the device that was made

Excelente 👌 información,

TWOT ...... Total Waste Of Time

The idea is good, but your methods are sloppy and unsafe...

It's pretty obvious he just made a spot welder out of a battery, copper tube, some wire, a screw and some wood. Almost forgot the electrical tape.

Brillant solution for solding razor blade but also assemble battery pack. Did you consider the battery assembly element ?

Чё правда чтоли? Это все? Медная трубка взята для большего времени видео? Ушел паять бритвенные лезвия вместе))

Get a vice or lose a finger!

فكرة رائعه .. لا تكل ولا تمل .. وسر على بركة الله وحاول فقط كتابة الترجمه العربية لما تشير إليه مكتوبا على الإجهزة التي تستعملها.

Ik begrijp enkel nog steeds niet in welke context je dit kan aanwenden/gebruiken maar ben wel onder de indruk van jouw kennis

I did this and welded my blade on my bulldozer

I think it's better if you buy one and forget all that work

I think it's the Chinese way of hacking into your computer while you are distracted by the insanity!

Es fenomenal gracias y saludos desde Lleida España

Great! I've always wanted to weld my razor blades together!

Verarschung hoch drei ist dieses Video! Wozu dient denn das Kupferröhrchen? In das Holz hätte der Kohlestift mit dem Draht auch gleich/direkt eingesetzt werden können! Ob und wie oft und lange der 18 Volt/0,8 Ampere-Transformator das Punktschweißen aushält, möchte ich dem Trafo nicht zumuten bzw. ausprobieren. UND, wer benötigt zusammengeschweißte Rasierklingen?

I Made One Of These And Started My Own Welding Business!!!

Здорово

Hello, what program do you use to record your videos?

Merci beaucoup ❤

Батареек полно, а вот медную трубку найти невозможно.

My goodness, you are absolutel and utterly genius. The tools you have for making gadgets is so impressive. Hands for a vice, hacksaw, thumb pad. God knows what your face looks like after shaving. More scars and craters than what's on the moon. Glad it's not you that made chitty chitty bang bang. I have more faith in the child catcher. ( What a fucking contraption )

the post from the battery is LEAD and yor sanding it are you wearing a mask and gloves and googles

Da warte ich 8 Minuten, um dahinter zu kommen, was das alles soll. Und dann werden zwei Rasierklingen zusammen geschweißt. Echt jetzt? Was soll das?🤔

I made one of these when I was in grade school for a shop class project. Since our power supply was just some D cell batteries, all it would do is engrave into light steel. It would etch your name or whatever. I also pulled the carbon rod out of some AA batteries for the tip. That was like in 1966.

What an absolute waist of time. One of the dumbest ideas I've seen lately. 😢