iPad 7 Bootlooping with iTunes Error 9 Code. How To Fix with JC P7 NAND Programmer

No video

iPad 7 Bootlooping with iTunes Error 9 Code. How To Fix with JC P7 NAND Programmer

Рет қаралды 19,513

VCC Board Repairs - Jesse Cruz

Күн бұрын

Пікірлер: 64

@Halhal-jg1gx Жыл бұрын

Jessie as a non board level iPhone dyi-er repair I appreciate you sharing your knowledge before I attempt board level repair. Keep up the great content.

@VCCBoardRepairs Жыл бұрын

Appreciate it! Thank you so much

@chasefournier Жыл бұрын

Hey jesse! I've seen an issue like this with the 4gb NAND Xbox 360, Its basically where the write function on the NAND fails, but the nand will still read no problem. great video buddy! :)

@VCCBoardRepairs Жыл бұрын

Ah nice! Thanks for the support!

@MrBlowmyselfup Жыл бұрын

thanks for your videos on removing underfill and replacing smd components, i successfully replaced an U3700 camera power ic!

@VCCBoardRepairs Жыл бұрын

That's awesome! Congratulations!

@mohannadsadeddin8201 Жыл бұрын

Great work as always, I was wondering if someone used these same Serial, bluetooth, wifi numbers could he activate his iPad?

@VCCBoardRepairs Жыл бұрын

Depends if it's already logged into iCloud

@RonaldKlein-dp6es Жыл бұрын

where can i buy the nand

@michaelknowles1651 Жыл бұрын

Hi there great video and thank you for the information. I have the same issue however it's the 4013 error. You mentioned this within the video a few times. Will you be doing a video to cover this type of issue also. Many thanx

@VCCBoardRepairs Жыл бұрын

I have one already. But was unsuccessful: kzfaq.info/get/bejne/ndeRncmKm8ybc3U.html

@michaelknowles1651 Жыл бұрын

@@VCCBoardRepairs much appreciated for the reply. I will definitely check this out. Thank you

@mohammedbikkar2103 Жыл бұрын

Hey bro do you have any solution Our tricks for LCD problem After change Nand

@kinghassan9834 Жыл бұрын

Great video jese I have a question from where you get the sn and wiif address

@VCCBoardRepairs Жыл бұрын

Check video description

@leerzeichen1910 7 ай бұрын

how to get to the original WiFi and BT serial number if the ipad has 4G?

@tchierrafire Жыл бұрын

Thanks a lot for this great content. How did you get the SN, Wifi and bluetooth though?

@Skoolkidsproduction Жыл бұрын

aliexpress

@VCCBoardRepairs Жыл бұрын

Contact Wayne Bonnici for a new SN: m.me/waynebonn13

@user-ot5tk6hs5t Ай бұрын

Hey jessie, my iPad 8 got error 9 and when i gave it to fixer he said the small pads on the motherboard under nand chip are damaged can they get fixed ? And when i gave it to second fixer he said its the cpu problem what should i do im confused plz help 🙏🏻❤️

@VCCBoardRepairs Ай бұрын

Sadly, it sounds like the iPad is damaged beyond repair

@MiIran-jv7bc Жыл бұрын

Hello I totally watched your video I have a question The old hard drive was not read by JC and you dropped the new hard drive and then after turning on the phone, it entered the serial number and Wi-Fi and Bluetooth serial number. Where did you get the serial number and Wi-Fi and Bluetooth serial number of the broken hard drive and insert it into the new hard drive?

@VCCBoardRepairs Жыл бұрын

You can buy from many places. But this only works for iPad 7 wifi model in this case

@achimugusolomon8563 Жыл бұрын

Thanks Jesse.Pls do you know if paul Daniels flex board view software can open bvr files on Windows computers?How can I buy the software in Nigeria?

@VCCBoardRepairs Жыл бұрын

Contact Paul Daniels for support 😅

@vincec4359 Жыл бұрын

Jessie is that the T3B With T115 Handle+3 Tips you using.

@VCCBoardRepairs Жыл бұрын

It's T210 with Knife tip

@drivingsimulation23 Жыл бұрын

I hope you can reply I have an issue with my iPhone plus it works but sometimes it will get stuck on the ( black wheel of death ) loading screen with white wheel and keeps rebooting, and when I go to safari it says ( sorry this webpage couldn't be reloaded ) and when I delete a photo or video it appears back and I can't access no apps neither make a video, my iPhone is on iOS 16.0 beta I think would you could help me solve my issue 🙏🙏🙏🙏

@Digitallabgr Жыл бұрын

what if we write those numbers down i mean /sn /wifi /Bluetooth at the time we buy the device

@VCCBoardRepairs Жыл бұрын

Yes but no one will do that lol

@bcherdak94 11 ай бұрын

hey, where do you get clean serial numbers for ipads for repairing dead nand?

@VCCBoardRepairs 11 ай бұрын

You can now recover the serial info using JC P7 and JCID Drawing Software

@Papy78 7 ай бұрын

Hi, my iPad7 does not charge and it does not turn on. The nand voltages (1.8, 0.9 and 3.3) are unstable...the other voltages seem ok....any ideas? Thanks

@VCCBoardRepairs 7 ай бұрын

Probably CPU issue

@Papy78 7 ай бұрын

@@VCCBoardRepairs thank you for your answer, I just retested but I no longer have all the voltages arriving at the nand...I have the main vcc and the bat vcc and also the 1.8v always from the U8100. Maybe the 8100 hs or more likely the cpu? thanks again

@LyricsVideo4U Жыл бұрын

Great stuff 🎵🔥

@VCCBoardRepairs Жыл бұрын

Thanks 🔥

@borisdg Жыл бұрын

Do you know what NAND Apple are using in latest devies? I noticed that NANDS in Air 5, iPhone 14 (Pro), Apple TV 4k 2022 are smaller than let's say Air 4, iPhone 13 (Pro) and so.

@VCCBoardRepairs Жыл бұрын

Yes BGA 315

@borisdg Жыл бұрын

@@VCCBoardRepairs TLC? What's the difference? More modern or? Thanks!

@VCCBoardRepairs Жыл бұрын

No idea lol

@hectorayala8626 Жыл бұрын

gracias hermano, actualmente tengo una igual

@VCCBoardRepairs Жыл бұрын

Hojala si la arreglaste

@ronaldr2693 Жыл бұрын

Did the hard disk need to be replaced? Could the hard disk be repaired with a programmer? That way we can use the same hard disk if we don't have any laying around?

@VCCBoardRepairs Жыл бұрын

The NAND was replaced because it went bad

@ronaldr2693 Жыл бұрын

@@VCCBoardRepairs sorry that is what I meant. The NAND, is it possible to remove it and flash (repair) it with a programmer? And use the same Nand? Or is replacing the only option? Since it's only data corruption and not physical damage.

@VCCBoardRepairs Жыл бұрын

I heard it's possible but I would rather replace it to ensure a reliable repair

@vincentlee2487 2 ай бұрын

if i get an error 4013 initially and then tried fix flash i now get error 1101, is it a NAND problem?

@VCCBoardRepairs 2 ай бұрын

Probably CPU

@vincentlee2487 2 ай бұрын

@@VCCBoardRepairs sorry its actually... error 1110... typo haha. It gets stuck on 18% sending kernel cache on 3uTools

@oldspy79 Жыл бұрын

Hi Jessie! You mention about rotation after nand replacement. I tried to upgrade my iphone 11 pro 64gb to 256gb, but unfortunately first the 256Gb nand was pulled from iphone x, so i can't use it. secondly I damaged my original nand. I recover my phone with JC P13 used unbinding an other 64Gb nand from iPhone 11 donor board, so get my phone original SN and wifi/bt data. But after all repair process phone working just my taptic engine vibrating loudy and have problem with orientation. Do you know how can I fix this issue?

@VCCBoardRepairs Жыл бұрын

You have to write a generic SYSCFG from JC software. Select the model on the left & click "WRITE SYSCFG" Then edit the SN, WiFi, BT, model, color info and restore again

@oldspy79 Жыл бұрын

Thank you the quick answer! I didn’t do that when prepare the new NAND.

@oldspy79 Жыл бұрын

I did it and now phone work properly. Other question. NAND is locked to phone models. It’s possible to unlock for use other model?

@pinokioshare2160 Жыл бұрын

what brand microscope ?

@VCCBoardRepairs Жыл бұрын

Parco You can find it here Www.vccboardrepairs.com/gear

@TheAGIGuy Жыл бұрын

the lcd digitizer tip is good. but BE CAREFUL because if that lcd slides over and touches any exposed tesa or something, you are gonna need a new lcd xD trust me. also, if you have any ways to clean tesa residue from an lcd without destroying the lcd, lmk :)

@VCCBoardRepairs Жыл бұрын

I've never had that issue