Thanks! Definitely not one of my favorites.

Hi @ReForceofficial and thanks for taking the time to comment. Do feel free to elaborate if I am misinterpreting what you said. There is a common misconception that adding solder on top of the flex cable help to create a bond is useful. It is not as the two surfaces where the actual joint is located are actually underneath it. There is virtually no space between the surface of the motherboard and the charge port flex cable, so you don't need to use a whole lot of solder. Take a look at the factory joints and you'll see what I mean. Also, this is not like say an HDMI port that is prone to wear and tear. Once you install the logic board, there should never be any stress on that area.