iPhone 11 Charging Port Replacement

No video

iPhone 11 Charging Port Replacement

Рет қаралды 149,895

Күн бұрын

How to replace a cable with a lightning connector in an iPhone 11 Do-It-Yourself repair.
Buy charger port and screwdrivers on Amazon:
Screwdrivers set: amzn.to/2Dp1Rcm
Opening tool: amzn.to/2Zcwmdo
Adhesive Waterproof tape: amzn.to/2QxhDsu
Magnetic Mat: amzn.to/2Rw4G2w
ALIEXPRESS:
Charger Port: ali.pub/4dqw5c
Adhesive waterproof tape: ali.pub/3xd50v
Screwdrivers: ali.pub/305qf8
Answers for most popular questions: goo.gl/LRJghi
More photo and video guides on our website: www.how-fixit....
FOLLOW ME:
Instagram: / howfixit
Facebook: / howfixit
Twitter: / howfixit
*** DISCLAIMER ***
This video intended for general information only. We will not accept any liability for damage or injury caused while following this guide. Any reliance you place on such information is therefore strictly at your own risk. This video description and commentaries contains affiliate links, which means that if you click on one of the product links, I could receive a small commission.
*** AFFILIATE PROGRAM ***
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
#howfixit #diy #repair #ifix #howtofix #iphonerepair

Пікірлер: 79

@lalabings9893 Жыл бұрын

No need to remove almost all of the inner parts to change the Lightning Connector! You can leave the mainbord, the cam and the battery pack!

@AlekseevAdamovich Жыл бұрын

Agreed. That was unnecessary removing all of that :)

@J3II0_ 4 ай бұрын

I thought so I was wondering why he did

@j.c.a7472 Ай бұрын

Too much work 😂😂😂😊

@windexbottle3537 3 жыл бұрын

I’m pretty sure you don’t have to remove 95 percent of the insides to get to the charging port. But thanks for the video

@mykolapelyp9065 2 жыл бұрын

No, you don't need to remove all, just Simcard box tray and unplug 3 cables from motherboard on bottum side

@cambacunumi4355 Жыл бұрын

The comment i was looking for

@Theguyguyguy Жыл бұрын

Yeah this is stupid

@wendylambrichts3883 Жыл бұрын

You wish

@royroach1138 2 жыл бұрын

Caution - putting cameras on your magnetic mat can delete them from the functional world.

@byronupex3574 4 жыл бұрын

There’s no need to take half of the components out that you did. It’s just a waste of time and adhesive

@dylanwarren632 3 жыл бұрын

agreed, I just did it with only removing as far as sim tray and below.

@Britt-cq9xo 4 жыл бұрын

This is somewhat a tear down as well. You don’t need to take all these components out to replace the charging port. Great video though!

@Britt-cq9xo 4 жыл бұрын

That’s correct, just make sure you unplug the battery before unplugging any cables though

@Lukas-zt5jo 3 жыл бұрын

Although not necessary, it sure does give you lots of extra room which makes the repair a lot easier, atleast for me in the case of replacing the lightning port.

@windexbottle3537 3 жыл бұрын

I was thinking the same thing

@ankitpal9761 3 жыл бұрын

@@Lukas-zt5jo exactly

@ankitpal9761 3 жыл бұрын

@@Lukas-zt5jo my iphone 11 charging port is very loose …. Any idea to repair without replacement?

@oskarsoskars1169 4 жыл бұрын

You forgot connect back wireless charger connector :D

@heresbutler 3 жыл бұрын

were can i find an oem one that wont lead to boot loops?

@christianprado9186 Жыл бұрын

You put in a screw at the sim card holder and the next frame it disappeared , just please add a note that the screw was put in the wrong spot. Otherwise it's a great tutorial ! Thank you!

@gamebers 4 жыл бұрын

You don’t have to take motherboard and battery off to replace it !!!

@FoxHotelLima 4 жыл бұрын

Excellent tutorial and very sharp video! Thanks

@RobadobaChannel Жыл бұрын

nice phone background, I am also a hormonal young man

@dorsetben6618 11 ай бұрын

Really clear and really helpful - thank you very much.

@redeemedheathen 3 жыл бұрын

do you replace that small round rubber gasket on what appears to be the microphone? i cant seem to get mine to fit properly

@mytube92369 3 жыл бұрын

This could’ve been designed to be much easier to fix or replace by apple. You have to take the whole thing apart,that sucks! This charger port should’ve been inserted from outside and locked with 2 screw,as simple as that.

@PatDaddy13 2 жыл бұрын

How are they gonna make you get a whole new phone then?

@imanolsalgado3486 2 жыл бұрын

Why do you think Apple is so expensive

@anshumansrivastava4562 3 жыл бұрын

How much it will cost at apple service centre

@halabirepair235 2 жыл бұрын

Your video so good but dont remove pcb for hosing only remove sim jakect

@bodomitrea Жыл бұрын

very nice and clean work!

@therider0872 Жыл бұрын

I thought it was going to be easy task after googling hoe to replace the port but even though this tutorial is sharp, I don't think I want to do it anymore lol but thanks for the info

@RockG.o.d 6 ай бұрын

I don’t think hoes replace lightning ports.

@yurimartins7197 5 ай бұрын

Conteúdo excelente

@ordi303 Жыл бұрын

what's up with the screw that is put in at @15:08 and then magically disappears 3 seconds later?

@sarayutnakwan9192 Жыл бұрын

ขอบคุณครับ

@lostluv5068 2 жыл бұрын

Lol you forget to install wireless charging port connector into motherboard 😂😂😂😂😂😂

@ishaanchauhan8525 3 жыл бұрын

on a side note, removing the battery isn't necessary

@deathskillz7 Жыл бұрын

Thanks

@chester_ville_4066 2 жыл бұрын

Thank you very much good Sir.

@surajibrahim7703 Жыл бұрын

That great job

@bpravinraj3339 Жыл бұрын

Bro u didn't plug the wireless charging connector man

@luc173 Жыл бұрын

does it work also for 11 mini??

@Jc-jv5bu 3 жыл бұрын

Do you need to program the port? Because when I put the new port in my phone was laggy and would bootlop.

@wcr6121 3 жыл бұрын

Thank you. That is all

@Jc-jv5bu 3 жыл бұрын

If it’s not apple original will it still work?

@tapion300 2 жыл бұрын

Should have tested if it will charge

@adrianabreu1623 2 жыл бұрын

Bro, I made the change and now the iPhone restarts every 3 minutes. What should I do? Help me

@kcastillo1234 3 ай бұрын

So many unnecessary stuff to do making it have a higher chance of something going wrong for charging port you only need to remove bottom speaker, SIM card reader, Taptic Engine no need to remove battery or logic board

@brothacal4165 3 жыл бұрын

Why didn't you plug up the charger afterwards to show it worked? Other than that informative

@veganimo2243 Жыл бұрын

Because he probably fucking broken handling the Face ID the way he did… What an amateur

@JUNINHO_9K Жыл бұрын

Tenho certeza de que você não precisa remover 95% do interior para chegar à porta de carregamento. Mas obrigado pelo vídeo

@Proto61 3 жыл бұрын

Does the part fit on a Iphone 11 pro max? Or do I need another one?

@Ashiq.Tippu.Mohammad 2 жыл бұрын

Does such a small task require so much work?

@MrAaronchanel Жыл бұрын

No. He took out most of the insides for the hell of it. You need to take out the vibrator, speaker and sim card reader

@cankap5984 4 жыл бұрын

Cool

@tonyolguin2241 3 жыл бұрын

Is the mic also connected to the changing port?

@shrikepsd 3 жыл бұрын

Yes

@legitelectronics9163 3 жыл бұрын

Why you just take all that out lmaooooo

@starphone4248 2 жыл бұрын

Y he has removed all parts 😂😂😂😂 u dont need to remove sone of these but still a good video

@gmarkdp5839 3 жыл бұрын

What screw drivers needed?

@Bean-cs6vm Жыл бұрын

iPhones have 4 types of screwhead: Pentalobe Phillips Tripoint Standoff

@autoxpert5231 3 жыл бұрын

What size Y screw driver is needed to remove that first cover for the battery? I have a 0.6 Y and does not fit? This kit you are using has a 0.8 Y is that what your are using?

@simonshamami3175 3 жыл бұрын

lmaoooooo why do you need to take the battery and the motherboard off there is no reason for taking either of it off the connector for the cp lays under the sim tray and you just need to work on the bottom of the phone... step up your game i been doing this for 15 years.

@Lukas-zt5jo 3 жыл бұрын

Seeing that iPhones have only been around since 2007 the most experience with iPhones you could have is 13 years. I can see reason to remove the logic board and battery, as the charge port is held down by adhesive that needs to be heated up to remove. You don’t want to damage the logic board or battery in the process of heating up the adhesive (lithium ion batteries can only take so much heat before they start to degrade/ overheat. On the other hand with the logic board, you don’t want to fry any components or allow the solder to reflow and cause a short. So it’s all a safety measure). No harm in being too cautious when it comes to working on delicate hardware. Trust me, it’s also nice to have extra room to use your spudger to help remove adhered cables along with giving room to install the replacement part that is covered in adhesive around the charge port. iPhones today weren’t made like they were 10-13 years ago, today they are made with the intent to stop people from working on their own devices, thus it is important not to destroy any components for both one, because you don’t want to have to spend more money, and two, because many components are serially paired/ are much more tricky to repair than a charge port.

@maritzamorales8149 3 жыл бұрын

omg i did it all and my phone isnt turning bacj onn i connected the power and display correctly please help me!!!