iPhone 13 Pro no IMEI, Searching for Network, No Service, No SIM

iPhone 13 Pro no IMEI, Searching for Network, No Service, No SIM - Advanced Motherboard Repair

Рет қаралды 7,616

10 ай бұрын

Here i have an iPhone 13 Pro with no IMEI after was droped. I found 2 broken pads, and more disconected.
I rebuild the 2 pads, reballed the RF board and the phone is working again.
Some of the tools and supplies i use all time
- Sugon T26 soldering station with JBC C210-018, JBC C210-002 and JBC C210-020 tips
- Quick 861DW Hot Air Station
- Gordak 952-A (I'm using this only for it's soldering iron)
- Seek Compact XR Thermal Camera
- UNI-T UT171B Multimeter
- HY3005D Power Supply (very old)
- Kingbo RMA 218 Flux
- Baku BK-227 Flux
- Cynel Soldering Wire 0.5mm and 0.7mm
- Mechanic XGS40 158C Solder Paste
- Relife RL-404 138C Solder Paste
Like and subscribe if you enjoy the video

Пікірлер: 23

@mohamad-qh5px 9 ай бұрын

Nice job sir❤

@PhoneRepairRO 9 ай бұрын

Thank you!

@devoo12 Ай бұрын

Please cost of repair

@tearspainter1487 5 ай бұрын

hi there great work what type of solder wick do you use ?

@PhoneRepairRO 5 ай бұрын

Hello! I use this one from Chemtronics www.chemtronics.com/soder-wick-rosin-2 Is quite expensive but good! Have a nice day!

@tearspainter1487 5 ай бұрын

thank you very much @@PhoneRepairRO

@mirceaalicu 10 ай бұрын

De 2 luni nu am mai reparat un telefon… mi-e dor, din 5 sept încep și eu

@yvesossiri7066 2 ай бұрын

Guei serge Patrick

@Tombacruise1991 3 ай бұрын

Which country

@staray7541 10 ай бұрын

I have seen many iphones worked after activation eventhough *#06# doesn't show imei on screen but you can find it in the setting. In this video, I could see IMEI is ending **8811 that is 13 pro.

@PhoneRepairRO 10 ай бұрын

If IMEI does not show when you dial *#06# and you update/restore, the phone will not activate! Watch entire video, the phone had oxidized pads and lots of disconected pads!

@staray7541 10 ай бұрын

@@PhoneRepairROthank you for quick respond. When dialing *#06# doesn't work I get imei number in the setting and activate the phone. I am just curious why #*06# doesn't show number but imei is in the setting.

@PhoneRepairRO 10 ай бұрын

@@staray7541 If IMEI shows in settings and you are able to activate the phone it might be some power line that is shorted (and/or disconected) and not related to Baseband cpu, but related to some I2C line, some power amp and so on! There are alot of parts not related to Baseband cpu / eprom that can mess with some I2C line. The phone will activate but no IMEI when dial *#06#. I actualy have an iPhone 13 with this problem, i swaped RF board and the problem is still there! I will swap the AP board soon (it will be a long video about this one).

@staray7541 10 ай бұрын

@@PhoneRepairROit has been bothering me for a few years. Thank you so much.

@fixthisone 7 ай бұрын

This happens when the modem power section works but there is an issue with one of the power amplifiers. All the *#06# does is test quickly if all the network circuits can be pinged and respond

@user-eb4jm2mo8r 5 ай бұрын

am having dsame problem on my iPhone

@PhoneRepairRO 5 ай бұрын

Hello, If the phone was dropped, you will have some broken pads! On these models the solder is more rigid, so it will rip apart the pad from inside the board! If you don't have microsoldering skills, i recommend you to go to a shop that can do that for you. Have a nice day!

@devoo12 Ай бұрын

@@PhoneRepairRO i have the same issue on my 14plus after drop the phone . thanks for the information

@PhoneRepairRO Ай бұрын

@@devoo12 100% you have some broken pads there! Have a nice day!

@user-lt1cq8jh9s 6 күн бұрын

@@devoo12 bro mere v 14 plus me wifi work krti hai but network nhi aati or kv atti hai to 5G on nhi hota kaha repair krwya apne

@devoo12 6 күн бұрын

@@user-lt1cq8jh9s Apple service centre