Blows my mind you just free handed those chips. Impressive.

THIS IS GREAT! All these iCloud spambots in one place for easy reporting. Google's spam-filter AI learning algorithm is going to have a field day!

You have such good skill in handling heat gun and flux, amount of time required to make these changes makes it look simple, but really requires a lots of experience and dedication. I love watching this video.

That was very nicely done... (and very quick!). I will soon start with BGA too. Keep it up!

1. the best video about icloud remove i have ever seen on youtube. 2. thanks for the video!!! 3. great work! 4. can i use this chips for the iphone 5s ? Thank you for the answer!

You replaced all 3 because they are paired. If i was to replace the first chip with a new one would i still have to replace the other 2, do they have to be paired, or can you pair without changing all 3. Great vid one of the best for showing you what to do

wow wow You are a genius and professional in the hardware ... good job

Я люблю следить за хорошим каналом, обращать внимание на мобильные технологии, современные и связанные с ними программы, просматривать современные модели и последние обновления Android со всеми его современными моделями, и надеюсь на дальнейший прогресс

great vid :) which chips you have to change by an IPhone 6? greats

is it working on ip5s? please make a video for 5s. goodjob.

sir i am asking that, did you use any ic programmer to program the NAND IC? thank you for your immediate response.

Hi. Thanks. How many celsius is your setting and how close is the hot air tip? Also is the blower on no. 4 or lower or higher? Thank you.

does the baseband chip (601_RF) need any programming or do these just start working together once setup.

My dear friend are you changed it's parts or you just removed and put it back?

You should give a list of equipment you used. Thanks for the video!!!

Great, my congratulations, but I wanted to know if those same pieces that you removed are the same ones that you put again? or are there other new parts, the three parts?

Where to buy this chips and what is the stuff that you use?

Rachel, iRemover works, search it on google

what,,repalce Ic just used flux..you great job dude. i can't use way it.because i am amatir.

What equipment do u use and i have ic locked logic board but i want to take off iPhone logic board chips and reinstall them on the bare board but what do u mean if the old logic board is icloud locked and if i buy a bare logic board will it still work like a normal iphone

steve job is going to haunt you in your dreams

Great Work !

Hey man, thanks for the video. I just have one question, when you say 400 degrees are those Celsius or Fahrenheit?

Hello nice video quick question can i use blank chips i buy from online or do i have to get them programmed first? Also i have a mac ive read it online someone said if u have a mac computer then it should b good without programming is it true?

Excuse me for asking where to buy chip RAM and HDD

which product you use to not let the balls come together and cause a short circuit?

Did you pair the new chips together before putting them onto the old motherboard ?

What kind of adhesive are you using to connect the chips to the logic board?

Was this video spammed with icloud unlock methods or what!!!!

Hi man thank for this nice video, but what do you use to replace the chip ? a thermic glue?

Hi, what temperature do you use? Thank you

Hey there.. Do these 3 components need to be a "Set" ? I need to take them from another phones logic board ? I can't just go online buy these components one by one can I ?

brandon Use *iRemover* , google it, its is working

talk about her yet

Deep fix: I wanna ask you. The glue you used is usual hot melt adhesive? Or what is that? THX

sorry to ask a dumb question but where do you get the chips for this? and was that just a regular heat gun? what is the glue or adhesive you were using called?

genius

what wabsite sells these chips

Thanx, great DIY. Do you need to program the chips?

thanx a lot man

If I remove the Icloud ship and don't replace them,I guess the phone wouldn't work ?

Thx from Russia. Thx!

What type of soldering tool are you using? What temp approximately?

What chips did you replace? Thanks! :)

where can i buy that 3 parts?

Lifting chips up with a knife is a really bad idea, unless you want to destroy your board by ripping the BGA's pad off… You would better use a bigger nozzle on your heat gun, and while you heat the chip, touch it lightly with tweezers to see if solder has melted completely, then delicately pick it up while heating.

the new parts need to be programmed if e.g. they are shipped from aliexpress? or i can put them right away without programming anything?

thanx from France and I got 3 questions 1 what's the name of those 3 cheeps exactly that you replaced them I mean if I wanna buy them I should ask for what 2 by this strategy of your video can I unlock any model of iPhone like ( iPhone 5 / 5c/5s /6/6s/........ or it's limited? if it's so what's those models that can be unlocked this way ?! 3 you have posted this video almost 3 years ago and the question is does this technic still works by now pls answer as soon as possible ?

Где можно купить эти микросхемы?

it is easier to buy Android smartphone.

Is there any glue under BGA component? And do you have to program new chips before soldering to mainboard?

Whats does it called that liquid gel stuff you put on the motherboard before soldering new components ? Flux ? does it have to be some special king of flux or not ? Cuz i have some liquid.

can you do this with iPhone 5c ?

Google search for iRemover, it works

what chips do I need to unlock an iPhone 6s? are they different? Also do you over your service or are these simply tutorials?

hi, when you replacing the chips, why you do not need to reballing it before re-blowing to the board ?

How to remove iCloud of stolen phone

It's fake iphone he removing Qualcomm chipset it use in android devices but apple using their own bionic a8 chipset in the iphone how does it possible Qualcomm in apple

Nice job,just subscribed on your channel! Can you tell me how the 3 chips has been paired together? If i'll buy it all 3 new from China and replace,it will work? Thanks!

Hi, thanks for sharing. I'm a newbie in electrical. Can you tell me what the blower type did you used, and how about temperature? And then, what paste type to resemble new part into a board? Can you tell me what the blower type did you used, and how about temperature? And then, what paste type to resemble new part into a board?

Ah, so this is the manual for the thiefs to prepare the stolen iPhones for selling? nice.

Did you replace the 3 chip or only the nand flash ?

What glue did you use for putting that chip back on, i have never done this before

When you change these 3 chips will the data be intact on the new board when it powers on?

Do u need to replace all three chips or just the u601-rf?

did u replace the hdd chip in this video?? if yes wont it need serial number programming ??

hi, what temperature do you use on the air flow? thanks

Awesome video, great work

Your good with SMD for sure.

Do the chips require programming, or do they come pre-programed?

mate why do you apply soldering paste? for what specifics please give it an explanation and where you buy those chips? one more question, can you remove and put it back the same chips rather than replacing (buying) thanks

@deep fix to unlock icloud, I have to take the components from another iphone or can I buy them on the internet?

Hello, thank you for this nice video, but can I ask you? Can you do this with iPhone 6, 16GB ? Where do I buy these 3 parts? This is thermic glue? Thank you.

hi, nice video, so , you remove the 3 chips and then you put the same ones back,? or you put new chips in it?

the replacing ic's doesn't has iCloud account activate? and for the nand works with the same changing only write the sn ? thanks bro

hi, in the iphone 5s, you must do the same thing and replace the 3 ic's???

nice video, how about memory upgrade ? did you do that ?

HI there\!, Exelent video, one question or maybe two. Whats the liquid that you put into the mother and the new chip? and the other question is , the ideal temperature what is it to work changing the chips.? Thank you very much! Im Subscribing you , keep killing it!

did you replace them with others ic's ? or just re installed them again >?

can you please tell me, if i only want to remove icloud lock then still i have replace all of them you mentioned?

Hello Friend ! That temperature used in the heat gun desoldering IC so easily ?. Thank you so much

Should the chips needed to be replaced necessary being paired? Or could I just buy the needed chips separately and change them? I am a beginner and I do not understand all this stuff. Any help is appreciated :)

this is pretty neat....thanks for the video

Tell me one thing please. Do i have to buy eeprom and baseband from the same supplier,In order to match imei. Or i can buy from different sellers.

hola le cambia los componentes o solo los quita y luego los monta de nuevo los mismos o son nuevos componentes gracias por su respuesta

Great video, but where do you find the chips ? Please give me a link to buy basband, HDD and eproom ic.

Is the procedure the same for iPhone 5C ? Thank You.

hi admin..want to ask something..what chemical/things that you put to the cip..thank bro..want to try...

can we do this method with above higher models also? your reply will be highly appreciable...

the icies u replaced are new or for another iphone ? (old)

do you have to reprogramm the hdd or the other chips ? or just replace them with the new one ?

Did you change a new one those ic's?

so does this mean.. that its possible to swap the memory between iphone 5 with exception you must swap it with the u501&u601? is it?

and if the other cases that physically damage the chips you take iCloud account also had not left with that account?

Great bro wonder full clips

Hi man. You used new parts or used the old ?

hello friend you replace used ic´s from other board. but if i buy a new ones and replace them it´s necessary program those new ic´s?

Do I need programming services aligns changing parts? AliExpress' sold in the baseband - qualcosina and do NAND flash in taxa work?

And it is necessary to change the three chips or the Baseband cpu is enough

Hi! Thanks for your Video. I seriously want to learn this. So, let me please ask you, where can I buy related Stuff, for example the thing you use to fix the electronics in position. Preferd from Germany. Thank you!