AB60 Toyota Tundra Valve Body Removal and Installation

No video

AB60 Toyota Tundra Valve Body Removal and Installation

Рет қаралды 112,537

Күн бұрын

John Lombardo of IPT Performance Transmissions shows the removal and installation procedure for a Toyota Tundra AB60 Valve Body
Transmission rebuild / built performance auto. Transmission repair.
Toyota 200 Series, Lexus 570, Tundra AB60 6 Speed Upgrade Built Performance Automatic Transmission AB60E and AB60F
Upgraded Performance AB60 Tundra Valve Body can be found here:
www.importperf...
www.importperf...
Transmission rebuild / built performance auto. Transmission repair. Built Auto. High performance AB60, shift kit, Sonnax components
Toyota AB60 Valve Body Modification:
www.importperf...
Toyota WS ATF 6 Pack
amzn.to/3IFKHaW
Toyota WS ATF 4 Pack
amzn.to/3Z9Pskn
#superchargedtundra #tundra4x4 #builtab60 #trdoffroad #magnusonsupercharger #ipt #ipttransmission #sonnax #shiftkit

Пікірлер: 35

@iptperformancetrans 11 ай бұрын

We specialize in high performance Toyota automatics, as well as many other models. Find Us: www.importperformancetrans.com/ 973.406.7000 Instagram - @IPTperformancetransmission Facebook - Import Performance Transmissions Tik Tok - IPT_Transmission

@adamwarszawik4825 7 жыл бұрын

Thanks John just did it last month in the truck. Just something to look be prepared for. people in the north country like me. You will most likely snap a few transmission pan bolts. The Tap is M6x1 Also for filling the transmission check out my hose and funnel video. Vaseline holds the check valves and orings. Long story shorty if I am full throttle I can keep burning the tires in third when my Tundra shifts. The truck does tow better as well.

@iaagg 10 жыл бұрын

The best car tutorial I have seen on KZfaq. Thanks.

@im4485 5 жыл бұрын

I like how clean and organized you are. First sign you are good at what you do. I watched another video before this and guy had everything drenched in oil and his workplace was a mess.

@coaltarp 5 жыл бұрын

Correction orange temp sensor goes on the Driver's side as it is installed in the vehicle. Trans is upside down in video

@MURD3RD 4 жыл бұрын

I have a feeling most of the folks doing this mod themselves can tell the difference and know that was just a slip. I noticed this as well when he mentions it in the video. If you noticed how the harness is designed, you really can't screw it up because then the harness won't lay right.

@somphothbsiratsamy3748 4 жыл бұрын

And I pretty much shoved a mini flathead up the sensor housing and cracked the solinoid wire housing, no yanking wire harness. Slid off pretty easy

@MuhammadAli-su3oo 7 жыл бұрын

please Sir upload complete rebuild & teardown videos. it helps so much.

@abdullahalismaili9301 6 жыл бұрын

truly impressive , what a video. Well done, full of confidence, precise and amazingly clear instructions and camera angle. Wow!!!!

@illussioncm 4 жыл бұрын

Nice tutorial. You the man👍

@somphothbsiratsamy3748 4 жыл бұрын

K, the code reads pressure control Solinoid A, the SL1 Clutch control#1, which controls 1,2,3,4, but it doesn't shift up to 5 or 6 😂🤣😅 I'm going out of my mind

@leeroyheckart7554 5 жыл бұрын

I have a p2757. Where is the tcc solenoid? Do I need to remove the valve body to access the tcc solenoid?

@MikeyLeeify 11 жыл бұрын

Thank you for the VERY helpful video. I have very limited mechanical skills and I was able to do this myself. I will note that you should invest in a good AWL, I bout a cheap one that kept bending and wouldn't dislodge the white & black connectors. Ended up uses a pair of needle nose pliers and nicked the insulation on one of the copper wires...

@juntalirongan527 6 жыл бұрын

hi i have similar this transmission for tundra 2010 the problem is always when i make test drive the code is P2757 tcc performance or stock off i"ll do and make everything but it still come the fault code when i test drive can you help me where is the possible trouble of this type off fault code?

@emiliobueno5773 4 жыл бұрын

There’s a really small spring that came out does that one go in one of the accumulator piston?

@somphothbsiratsamy3748 4 жыл бұрын

Ty for the confirmation, but why wont my transmission shift beyond 4th gear? All solinoids are new, but I get a different Solinoids reading during diagnosis. Resulting to flashing and recalibrating ECM/PCM/TCM.

@srvjediknightsrv750 8 жыл бұрын

i get forward in neutral and no reverse I am thinking solenoid problems ??

@237cooter 5 жыл бұрын

Very informative. Thanks. What is the proper temp using the scan gauge II to check the fluid level on a 2016 sequoia? Im finding a lot of conflicting information. Thank you

@gabinotrujillo8405 7 жыл бұрын

excellent video, thanks for sharing.. 😎 ..

@ilovetoseetits 8 жыл бұрын

what happens if you've over tighten one side of the vale body? I've done that and now the auto trans only goes to full 4 speed after it has been running for 10 mins. Should I go back down there and tight everything evenly before my next trans oil change?

@illduitmyself 8 жыл бұрын

so basically transmission doesn't really "go out" its the valve body? so if my trans is slipping and hard shifting even after flush. replace valve body?

@DELTRANIO99 6 жыл бұрын

Great vid have a 2008 Tacoma v 6 can you tell me where the shift solenoid E is ?

@jhoncarlosmorenocastro612 9 жыл бұрын

Thanks, great video ! !

@ncurc9766 4 жыл бұрын

Will it hurt anything if I keep my truck locked out of 6th gear for around town driving? My toyota tundra will sometimes lug itself around in 6th in that 35 to 45 mph range

@alexanderuzoechina1384 6 жыл бұрын

Hi, I have an 05 tundra with shifting problems. Drives good from 1st to 2nd or say 30 mph or if I whack it; 50mph then it revs freely. and if I floor some more it wud engage with a very violent thud like I got smacked in the rear. Throws up code P2716. What's your advice?

@mengvaj87 4 жыл бұрын

So which is the reverse solenoid the two bigger solenoid from the opposite of each?

@hectorcastro8136 7 жыл бұрын

Why would you need to remove the valve bidy?

@adamwarszawik4825 7 жыл бұрын

John, Would this kit help Towing. I want to stay in 6th gear longer. At this time I barely press the gas and the truck shifts down. IIts 500hp so it does not need to shift down. Call me pickey but really I gently press the gas and it shifts down to 5th. If I was towing 10K I understand but I tow a 4,000 it should hold 6th I want to press more throttle. When I am not towing I can press down and the truck goes and it does not shit until you goose it pretty good. What happens is unless I am doing 80 with the camper this thing hunts back and forth between 5 and 6th most of the ride. Lets just say It not to my liking.

@jawadalqhtani3991 7 жыл бұрын

hi how flash valve body auto transmission toyota a750e

@cerajdrawil3821 5 жыл бұрын

Nice

@illduitmyself 8 жыл бұрын

AB60? is in what year?

@peterk5679 12 жыл бұрын

with the spings and cylinders why to do want them to be sent to you with the valve body ? do you send different spings ?

@CarlosRivas-zc4yp 6 жыл бұрын

Hey thanks for sharing that video i have a Lexus is250 I have a code solenoid c stuck off I took out the valve body but there's a problem i thing we're piston go there spring i don't know we're go