Ironman 4x4 Nomad 1300 and Deltawing XTR-71 Prinsu Rack Install

Рет қаралды 6,812

2 жыл бұрын

Hi everybody! In this video, we cover the installation of the Ironman 4x4 Nomad 1300 Install and Ironman 4x4 Deltawing XTR-71 on the no drill Prinsu Rack. All items are installed on a 2019 4Runner TRD Off-Road Premium.
This video is not a review and is more of a tutorial. Stay tuned for a full review of both items and make sure to leave any questions you have in the comments below!
The Nomad 1300 tent was originally installed on just the Prinsu Rack alone but was later upgraded to use the Prinsu Rooftop Tent Spacers as there was a very annoying squeaking from the crossbars. The Ironman 4x4 Deltawing XTR-71 does not use original mounting mechanisms and was instead altered to work better with the Prinsu Roof rack.
0:00-0:14 - Intro
0:14-1:08 - Unboxing
1:08-3:51 - Initial Install
3:51-4:34 - Running into Problems
4:34-6:34 - Awning Hardware
6:34-11:16 - Secondary and Awning Install
11:16-12:00 - Wrapping Up

Пікірлер: 19

@philipperez6422 2 жыл бұрын

this helped so much...... ive been trying to put this tent up on my car for two days. I just ordered the prinsu tent spacers and hopefully get to run this thing soon. your setup looks pretty sweet

@thommybeach 2 жыл бұрын

Glad to hear it could help! Appreciate the compliment. If you have any more questions when it does come, feel free to come ask them here!

@philipperez6422 2 жыл бұрын

can you post the size bolts you used and the washer to the bottom of the tent so i can grab those for when the spacers arrived it looks like you used a rather large spacer and a shorter bolt.

@thommybeach 2 жыл бұрын

@@philipperez6422 all the hardware for the tent mounts came with the spacers! The only hardware I had to purchase was for the awning mechanism. Everything else was included either with the tent, or with the rack spacers.

@Mr.Mikey.Holiday Жыл бұрын

I have the inspired overland rtt, the factory brackets also squeeked, the 1” mounts fixed it, what a relief i thought i was going crazy 😂. What front bumper do you have?

@thommybeach Жыл бұрын

Glad to hear that! Coastal off roads front bumper though. Weld it yourself but found someone local to do it and had a shop powder coat it.

@lcatalla7292 Жыл бұрын

I liked the set-up and affordability. You paid $1300 for the RTT & awning? Did I hear you right? How is it holding up so far, any regrets in buying this instead of other brands?

@thommybeach Жыл бұрын

I think it was closer for 2800$ for both brand new. No regrets on the brand, it held up well but I recently sold the set up in favor of a ground tent as I couldn’t justify having it mounted 24/7. If I were to go RTT again I would put it on a trailer so I could leave it behind when not in use.

@exploringMundos Жыл бұрын

I was about to get this bad boy, but might go with the swift 1400 so I don't run into those strap issues.

@thommybeach Жыл бұрын

I ultimately ended up selling mine. I did not use it enough to warrant the price as well as the squeaky squeaky. I decided a ground tent will have to do for me or may buy one of the inflatable mattresses for the 4 runner back.

@blakebarney3458 4 ай бұрын

Curious how well the awning held up mounted that way in wind and rough roads. Any issues? Looking to mount it the same way.

@thommybeach 4 ай бұрын

Awning mount had no issues! I would check it every month or so to check to make sure bolts were still tight. No road noise from it either

@snsumner75 Жыл бұрын

Can you share the part number for the awning brackets you used? I need to do a similar setup for my Prinsu Rack with Freespirit Evolution pop-up tent.

@thommybeach Жыл бұрын

No part number necessarily. Awning brackets were whatever Ironman 4x4 supplied. I think it’s their only bracket, not sure it can be purchased on its own. The 1 inch spacers for the tent mounts can be found with a quick google though!