Thank you for the support! And we are very glad the video helped out!

You bet!!

Wow thanks for the kind words, I'm very glad it helped out! We're definitely hoping to put some more advanced programming videos together this season! You can subscribe to get a notification when we post something new as well! If you're hoping for something sooner (its always surprising to me how long it takes to make a polished video haha) you can also join our patreon if you would like a personalized response helping you out with this sooner. Have a great spring!

Thanks for watching and letting us know you'd be interested in that!

Glad you like them! Thanks!

You're welcome! Glad you liked it!

You are most welcome!! Thanks!

Not the program number (which is a, b, c) The number showing will either represent the station/zone number or the start time number (1st, 2nd, 3rd) depending if you are in the run time or start time menus

You're welcome!

Thank you! Cheers!

You are most welcome! Thanks for the support!

They usally have a back up battery that keeps the time during power outages but if that dies that issue will occur. Some models you can change the back up battery (3v button cell in the x-core, or a 9v in the pro-C), although some of the newer controllers like the X2, unfortunately, have it permently attached to the circuit board and when it's dead it is very hard to change. A external power bank could be a solution if the controller is indoor.

Thanks! If you leave the water days menu on even, then it will only water on even days, such as the second and fourth Etc of the month. The MWFS is no longer active because it isn't on the screen. If you would like to do even day watering with restrictions on watering days, that would be going into the interval watering menu which we didn't cover because it's more advanced. We might look at covering that in a future video though if you're interested. If you want to check whether you're controller will be on even day watering, or the MWFS schedule, just turn the central control dial to the watering days menu, and if it the even/odd flashes, then that is what it will run. Does that help?

Thanks for watching! Our focus on this video was programming, whereas the manual option you mention is for a one-time operation of the sprinklers outside of the automatic program we just set, but if that's something you'd like demonstrates we'll try to make a video on that in the near future! Thanks for the idea and input!

Yes, you are correct, that the circled raindrops are off and the regular raindrops are on. Hopefully that helps and happy watering!

Hi Roberto check out our Hunter Advanced Programing video on our channel or at smartirrigation.com

The horizonatl dashes are the seasonal adjust, most likely , and 10 of them would be normal for full watering of your selected run time as for the "Off" that indicates the controller is OFF . It is hard to diagnose the issue without being there in person but the controller itself may have issues. Yes the time of day would be normal. How old is your controller?

Interesting! Can you share with us the model of your controller, about how old it is, and any other important details you can think of. Does the controller were properly aside from the year flashing when in the date setup menu, or does the display flash in other cases or does the program not run automatically as intended? I look forward to hearing from you!

Well actually that is correct because zones and start times are different. Don't confuse zones with start times. One start time runs all zones once , one after the other ( sequentially) . So four start times would run all eight zones (if they have run times programed in) 4 times per day for new seeded lawn for example. We rarly use more than one start time. This is the norm for most controllers so it is best to think of a start time as "Program Start Time" rather than " Zone Start time".

Good question! The water day type (day-of-the-week, even/odd, or interval) that the controller will run on is **sub-menu type that pops when you the dial from "RUN" to the "watering days" menu**. You can see that the interval watering menu (9:51 in video) is a little different in that it displays two numbers (typically a 1 and 0) along with the days of the week, and the even/odd menu (9:21 in the video) doesn't show the days of the week at all. So if you just want the controller running on the regular days-of-the-week option (not even/odd or interval), then just make sure when you turn the dial to the watering days menu that it just shows the days of the week at the bottom without any numbers. That's a good question, and something we maybe should have demonstrated visually. Thanks for the question!

Thanks for reaching out. We have a video on preparing your whole sprinkler system for the end of the season that you can check out here: kzfaq.info/get/bejne/sNySbKt3sp6Xfqs.htmlsi=P542hKfjINj_keTn&t=16 but specifically for shutting off the controller, you just turn the dial to the "OFF" position (to the left of "Run") and you're good to go!

🤔