Hey DJ before you pull it completely apart I think it's the magnets on your stator you need a new stator. That looks like magnet shavings. My RM z250 did the same thing and I replaced the stator and it ran fine I had the same kind of shavings

Them rmz are so clean🔥 the 250s and 450s are so underrated tbh if there where estart then hella people would not be talking shit

Remember to open your throttle completely up when doing a compression test or the air cant reach the cylinder which will give you untrue reading!

The bikes have a decompression that's why the compression is so low on the gage it just to make it easier to kick over.

Could be your transmission and crank. I just went through it with my rm where I had metal shavings in my oil from the piston and had to do a complete rebuild on it. Best decision is to do a complete rebuild instead of just rebuilding the bottom end.

4 strokes have a decompression lever...you have to do a leak down test. Compression tests can be done on 2 strokes. Also you need to have the throttle wide open when testing compression

Ive been done buy a four stroke blowing up. I will only ride a 2stroke now. Cheap to fix as i pull the motor out of frame and give it to my mechanic, to cut down on labour costs.

Watching from Northern Ireland in the UK loving your channel

About time there a video good to see you post again Love the videos bro

You are buying some risky machines, that rmz wont bring over 5K ever. And to rebuild the whole motor, with less than a $2000 budget, and expect to make money on it ? No way in hell son

That much metal and you were still able to get it to run, I would strongly suspect the transmission. Most likely took the crank out with it.

Rm army ✊🏼✊🏼

Hard to tell without pulling the cylinder. All will be reviled then but it ain't lookin good right now... Hopefully the head, cylinder, and cases aren't damaged.

I Bought That Same Compression Tester Yesterday And I Used On My 110 And A 65 I’m Fixing. I Haven’t Tried It On The 85. But For Both It Reads 30 Psi Which Is Low.How Long Have You Had Your Compression Tester?

It’s Lit 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥 Bro

Like the video but always clean a bike before you start opening things up incase they fall in the motor!

I've had a few times where I had no rod knock or piston slap and the the connecting rod bearings and crank bearings where just fried

What was the situation? Is there an updated vid?

I know what’s wrong with it. Ain’t got no gas in it.

5:18 u bought the bike from a rapper ?? u do know who big yavo is right ?😭😭

Those ugly graphics looked exactly like ones for the last carb-YZ 250F....the 2012/2013 model, especially that number graphic.

Ain't got no gas, uh hu.

suzuki rod is gone idk ... ive only had suzuki rods blew up on me usually not big deal just alot of work

I am new into flipping dirt bikes and was inspired by your videos. What do you think would be a fair price right now to flip a mint 2008 crf250r

I’d keep the 21 and fix and sale this one That new bikes to sweet to sale

Good vid

Pull the magnetic screen drain plug looks like a 14 mm below shifter

Hey bro what do you use to shine up the engine bay and stuff??

can u buy a rm125

What’s good cuh

Have you ever bought a stolen bike I’m pretty sure lots of ppl do cause a lot of used bikes don’t got title

Are you gonna build that cr125 or just get rid of it?

Did you buy it from a rapper? Look up(big yavo)😂😂

Is the Cr125 build still a plan?

Can we get update? Was it the crank?

RMZ is best

hf compression gauges are way off just fyi

🔥🔥🔥

Hey I got a question I have a rm 80 and when it is supposed to hit the power band it Boggs and dies out any idea for help?

Its probably the coil pack

No one rides Suzuki anymore, lol.

OMG

Hey bro can you do a raffle please

No offense but glad I dodged that bullet. I looked at that bike and decided to stay away.

First

I stay away from Suzuki’s

Hey bud your videos are not long enough

Dammnnn that sucks

I like Suzuki but they are very problematic I've been riding over 40yrs now and they have been the biggest pain in my ass bikes I ever had so now I just stay with my yz and kx