Magnets...great idea. Been wanting to add lights like you did but didn't want to hassle. Thanks for the idea

Thanks for watching Todd!

Todd Shiverdecker my friend moves 4x4 bales with hers and has no issues

Thanks for taking the time to share!

The larger motor was a no brainer for me!!!! The other nicer features were just icing.

Can you put a backhoe on a 1023 though?

@@jovanventura8726 Yes, the backhoe can be installed. It just cannot be ordered factory installed, so it's a dealer install only.

I needed to see this comment. Thank you.

Hope you enjoy it!

I got a 2021 1023e loader backhoe with t4 industrial tires I love it on seven acres it’s perfect I’m building a shooting range with mine clearing snow and I built a road I have had it 3 months or so

How much did it cost?

what is the price difference

Hi Brian, yes, there's a ton of choices out there. I guess that's really a good problem to have though, right!?! Haha :) Thanks for watching!

I have my heart set on a 3032E but am considering the 1025R due to the price difference. I've only been watching every review video for 2 solid months... Really curious if/when JD will release the 3d series, dealer says there is no ETA yet.

Thank you for the kind words Eddy! God bless you and yours as well :)

Yes, they are definitely lacking in rear light in the stock setup. Good call on adding the rear facing LED's.

Oh and congrats on the tractor! Great machines.

Thanks!!...you helped make my decision on a JD so I thank you ….Trying to get all your videos in but can't seem to find the #4 video you told me to watch but I'll keep trying to find it as your videos are very informative....great work keep them coming!!

Thanks Tom!

Blue as on New Holland???

Either mower deck fits either machine. This is mentioned in the video.

I haven't laid eyes on a 2018 1023e. I would have expected the other minor aesthetic changes to be applied to it as well, but perhaps not?

Good question. I haven't seen one on a 1023e before.

@@GoodWorksTractors I live in Ontario, Canada and purchased a 1023E in spring 2018. Traded in my JD2210 with soft side Curtis cab. My dealer did install the Mauser on it for me --- expensive though, but wanted rear wiper and opening rear window. The price difference was about $4000 between 1023E & 1025R, so put difference towards the cab. There was a problem with no cab heat, and they told me they had to make a different connection to the engine block. The 1023E and the 1025R have 2 different Yanmar engines. I use mine exclusive for snow - have an HLA 1000 series 60"" hydraulic angle (use the Artillian diverter valve) snow blade on the 120R loader and a 50"" Buhler blower on the 3pt hitch. The one thing I miss is down float on the 3pt hitch. Have never had any traction issues with turf tires - they're basically a snow tire tread. Power wise - no problems - the hydrostatic transmission allows full throttle snow blowing at any ground speed. Wray Harvey , Napanee, Ontario, Canada

Howdy, here you go. Thanks! www.goodworkstractors.com/product/ag-spray-3-point-electric-spreader-for-sale/

I'd recommend nothing larger than a 48" brush hog.

Good Works Tractors Should I assume you are referring ro a smaller tractor? Brush Hog vs Bush Hog. My buddy has the 4045 tractor and had the 4' Bush Hog for mowing 4.5 acres. He recently bought a 6' Bush Hog. Both PTO of course. It really does a nice job. No stray long grass. Almost looks like a finish mower. However, it is digging the crap out of a driveway when he swings it around.

Good question, there may be an aftermarket kit, but it isn't an option from JD.

Yes you can, I've added them on mine and also installed the nice JD seat cover made for the -R tractors that come with armrests.. it's fantastic and extremely comfortable. My 1023E was only 9,995 beans on sale last year, while the 1025R is well over 15,000 now.. absolutely love my 1023E and feel better about it every time I get on it!

Correct! About 25% bigger and more torque.

Thanks for chiming in!

First time I've ever heard that.

Good Works Tractors yep. I was astonished myself

Lmfao why would you buy a 1025r just for the mower if you have a clearly good enough mower that doesn't make any sense at all

@@Will-tm5bj was looking to move into the next newer generation assuming it would be an improvement (traded 2210 on 1025r) very disappointed. It didn't do anything better than the 2210 . We now have three 2305s 1x quick attach Snowblower 1x quick attach Broom 3x62c mid mower decks 1x tiller 1x FELoader 1xharrow bar 1x box scraper But no backhoe😥

What makes it better than the 1025r?

Wide range of pricing depending on age, hours, features, deck, tiller, location

My 2023E was 9995 on sale, 60" deck 2800, tiller 1800.

I admit, I'm an amateur.

I would say not really. I have a 48 on mine and any thick stuff will almost stall the motor. If you are just going to cut low grass maybe. I think a 60" would be max.

John Deere

@@GoodWorksTractors can i have a link please

I don't believe there is a link. I'm not a John Deere dealer. You'll need to go into their store or call them and they can quote it for your specific machine.

@@GoodWorksTractors ok thank u for your help

James Petersen The 1023e has always had mid PTO. It's the 3e Series that doesn't offer mid PTO. Clear as mud? Haha.

@@GoodWorksTractors okay because I have a 3038e

James Petersen yeah, that still isn't an option. Gotta go to the 3r Series for that.

Yes, 47" and 54" are options.

@@GoodWorksTractors Both front and rear options

eviloctober at my local dealer they’re about 2k difference both brand new

Sorry I should have watched the full video, You answered my question already. I need a trust worthy JD dealer, I have a JD dealer 2 miles from my house and I can't trust them to work on my tractor. It,s 4x4 and I had a front wheel bearing went out so I took it to them. They called me after they took it apart and said it will be 1200 dollar. I was like wow, But they already had it and it was apart in their shop. So they call and said it's done come and pick it up, So i did. took it off my trailer and used it for less than 5 min and it started making a grinding noise in that same front hub. So i pulled it in my shop and drained the diff gear oil so I could pull it apart, And they put used motor oil in my front diff instead of new gear oil. then I pulled the hub off and they did not even install the new bearing.And it scored the hub housing and chewed up the gears. I did not trust them at this point they might have said something else was wrong and charge me another 1200 to do nothing. So I took the hub back to them in a box and they gave me new parts and I installed them myself. And I told them to change all the bearing and they didn't because i'm still having other bearings going bad. And I didn't make a big deal out of it when I was there. But every since that time when I go in there to buy parts they charge me some crazy prices. At this point I wish I had bought something other than John Deere.

www.goodworkstractors.com/john-deere-1023e-vs-1025r-1-series-tractors/

My 1023e came with quick attache bucket quick attache front loader auto connect deck the dealership themselves said unless you need that seat n cruise control there's no difference

TTWT is buying the 2018 John Deere 1025r TLB. I will have his older TLB for sale in the near future.

@@GoodWorksTractors And if tractors could tell stories!!

@@Formulabruce ....lots of stories...but honestly, you've seen almost all of Johnny's stories!

Either one.. you're supposed to do all mowing etc in low gear, but I think some of these folks are trying to use high which is always wrong.

Either will get the job done, it's more about paying for additional conveniences.

I have the 1023E and it works just fine I have the mower,front in loader and tiller I love it easy to work on

I just notice this was 2 years ago lol..what did you end up getting?

I ended up with a 1023 and I love it 👌

@@rejeanpivin4119 forgot I have the bush hog too!! lol

WooHoo!

Tractor Time with Tim you will like the new loader style.

It sure is. I am trying to enjoy my precious last few days with it :)

Van Rose just over ride the safety

That's not typical. If you're brush hogging, there's tons of debris and you do need to clean off on a regular basis. You should always clear your screens before mowing lawn. I don't know how it would produce enough debris to clog the screens unless you're mowing for hours and hours on end.

Just using the mower

I think it's bad practice to mow with a loader on. Put's unneeded stress on the front axle, wear on the loader pivots, and provides a bouncy ride. I've never once had a 1025r overheat while mowing my lawn. It could definitely depend on conditions...i.e. if your lawn has 12" grass. Brush hogging is a different story.

It’s a 1023 the kubota is fine but the John Deere is getting hot and shutting the blades off motor is knocking now overheats after about 20 min mowing about 7 acres kubota does fine both mowing same day John Deere gets hot their tech said it’s to dusty

It's mentioned right in the video that either loader could go on either machine.

I agree

Good Works Tractors seems that they could lower production cost by using one engine.

Likely same engine with different injectors and set up.

@@akbychoice Likely the same engine with deiierent injectors and set up. V 8 Cat (3208) is available in 210 HP Naturally asperated, 375 425 HP turbo and injector difference (marine) in the same block.

sgtcrab1 but in this scenario 2 hp change to 25 hp, less than 10% change. Why. 3208 at 210 hp to 325 hp is more like 30-33% increase. That makes $ sense.

Both are both :)

Yes, both hydrostatic.

Haha, yeah buddy. I think he'll be happy with it :)

You're on the right track with either of these machines. Rear PTO is standard. The 1025r will just be more of the deluxe version while the 1023e will save you some money and still get the job done. Thanks for watching!

JGK 50 hours on that 2018 1025r

Wow, thats brand new! Do you have attractive financing?

JGK I can help with financing if you're in Michigan or Indiana.

Good Works Tractors Ohio...🤔

JGK Im sure there's plenty of good lenders in Ohio. Try the credit unions around you versus the big banks. They tend to be easier to work with.

I have sold quite a few 1023e's with a backhoe. What you were told isn't true. Just google it and you'll find 1023e's with backhoes on them.

A John Deere dealer told me you could not put the backhoe attachment on the 1023. As a result I bought a 1025! Looks like I was lied to

You can absolutely put the backhoe on the 2023E.. it's no big deal to do at all.

What am I wrong about?

Bought mine in 2016 and it has the auto connect which came as standard equipment.

It is not a standard feature, so you paid for that upgrade.

Don McMannamy Thanks for asking. We are in Kalamazoo, Michigan. We can deliver anywhere in the USA.

Thanks I'm in toledo so when i get the money ill come up and see what you have

Don McMannamy Sounds great. Hope to talk to you soon!

😂

Yep, different options for different models. Were you not planning to have a mower or loader on your tractor?

@@GoodWorksTractors I was looking for hp differences etc. I am only going to use as a snowblower. I understand the 1023 cant have a hard cab but the 1025r can.

I'm not sure what you're referring to?

@@GoodWorksTractors Just found it odd that john deere didn't offer duals on these tractors like most of the others.

the front brush guards come with the 2 "different" loaders the 120r's is nicer than the d120

That can be added to either tractor.. I have the nice brush guard and front weight bracket on my 1023E for use with the 49" tiller.. great setup and I absolutely love everything about it. Also have the 60" deck as well, wonderful mowing machine.. I call it my garden tractor on steroids 😆

If it were 10hp I would agree. I don't think anyone would ever notice 2hp.

I agree. The 1023 .9 liter producing that kind of hp and torque is very impressive. It's a yanmar on steroids.

Honestly with all the bullshit john deer is trying to do to farmers I wouldn't either just trying to see what's new

To clarify, 15HP at the PTO. Not engine HP.

22.1 HP

I'm a farmer in Arkansas. What type of financing could you do on the used 1023?

@@MitchellGWhitehead Sorry, I cannot help with financing in that state unfortunately.

Thank you for the reply. I appreciate your time.

Just so everyone knows, now I can help with financing in any state!