Skids is finaly deserves the attention,his figure is so unique and cool,especially that alt mod,prime arcee looks decent but i do like her alt mod and WE should get a cybertron ransack repaint-retool of it,bulkhead is so great especially the cube robot mod and we should get a energon demolishor retool of him,and laser prime is the best of the wave 1 ngl

There’s no need to apologize about the length of the review the longer the better in my opinion great review this has me hyped up to get these figures but being broke can be a pain in the ass😂

Apparently, Breakdown is going to be the last Stunticon. Motormaster is going to be in wave 3 with Dead End or Wildrider. So I'm curious how they're going to show off the combiner.

I was actually on board with Legacy Bullhead from day one. I think the design is super neat and a cool take on the character.

Arcee and Bulkhead are the definition of “better in person”

While Bulkhead takes obvious cues from his Prime incarnation, I think this Legacy toy is actually based on his Animated version; based mostly on him transforming into a military vehicle, rather than an SUV. I hope this is the case, and that we might get some Animated inspired designs in the future. Sentinel Prime, for example.

It's really weird just how MANY Transformers we're getting in the next few years. With Legacy, Velocitron, SS 86 and the Wreckers, we're getting basically 2 and a half lines worth of characters. 4 and a half if you count Selects separately. That shit is INSANE. Edit: Tarantulas and Cosmos better be baller

I had no intention of getting the Stunticons... but after seeing a couple images of Dragstrip, I just fell in love. He seriously gives off that "punk street outlaw" feel, with his visor and his twin pistols. I'll be getting as many of them as I can. Besides, they have Earth modes and my Decepticon army is a tad bit lacking in comparison to my Autobot army.

I did NOT expect James May to cameo in this video, but you did it! XD Skids is my favorite here. He does have issues, MOSTLY with paint IMO. If they colored him lighter, painted his rear bumper black as well as his rear, side windows, taillights and the backs of his thighs I think it would be closer to perfect...for ME. I did buy fillers for his legs and did a bit of touch up paint. I had no issues with the 5mm pegs for his arms myself so maybe I got lucky.

imagine if legacy recreated the WFC/FOC transformers, I would love to see a new FOC bruticus in toy form.

If this is wave 1, I can only imagine how epic the rest will be! We already have one part each of the Stunticons and Insecticons! And those are the ones I will be getting the rest of. I'm absolutely in love with Dragstrip already! Never had Menasor, always wanted him. This is my chance! 😈♥️

I never knew you could do that with kickback's weapon. That actually made me like the figure a whole lot more. Definitely the best energon accessory from the first wave

Ngl I love the bulkhead mould but I really wanna see what the Amazon wreckers redeco is. If it’s a darker green I swear I’ll double dip without a doubt

Bulkhead looks like Prime Breakdown to me.

i just found your channel and its really good, keep up the good work

11:39 i nearly choked on my drink and snack at this part XD

So, I'd never seen the leaked Metroplex until today. Looked it up. Yeah, nice excavator.

great review!!! a blast

There are a lot of hopes I have for legacy especially when I saw the list of the next few waves. Finally getting characters that normally we don’t get toys of like Crankcase and knockout. But I can’t wait to see what this next trilogy of lines will bring

Honestly I love the clear weapons, you can combine them together to form bigger weapons

My headcanon for Bulkhead is that he found a way to slim down a bit so he can be a little more useful on the battlefield. (Particularly in the “slightly less massive of a target” way.)

you somehow made bulkhead look better to me with only camera angles

I've got first edition bulkhead, didn't stop me from getting the legacy one! Love them both for very different versions of the character, the legacy fits SO WELL with the rest of the recent lines while the old one doesn't really

I think if they didn't say "our G1 universe" then Bulkhead would have been better received. I typed this just as you said something similar.

If you had to consider getting a core class figure, get SS Bumblebee Shockwave or Legacy Iguanus. They both slap...HARD!

I hope for when we do get unicron trilogy characters in legacy i hope we get a armada hot shot armada red alert cybertron overhaul cybertron red alert regular or cybertron defence version

I really like the concept of taking new characters and putting them through the g1 filter. One thing I noticed is when they did the same thing with Barricade, I didn't see as much complaining as I see with Arcee and Bulkhead. While I understand the problems, I hope this complaining doesn't discourage Hasbro since I would love to see G1 takes on Nitro Zeus, Lockdown, Lugnut, most of the Prime Decepticons, and others I can't think of right now.

Considering Hound in the movies was called bulkhead in one of the movie toy lines I believe, I can see where they would get that, though I may be mis-remembering that

Bulkhead aka Imaginarium of Doctor Parnassus

Legacy G2 Optimus Prime is a must have. The trailer may need more weapons but I believe third parties will give us that

Coming off of WFC's Weaponizers, the first thing I thought when I saw Bulkhead's minicon ports & torso design is that we'll get a retool into Energon Prime. Regardless, I NEED THAT MOLD

Friend got me Bulkhead and Blaster for my birthday, love them

Other than Bulkhead and Arcee, they all look fantastic! I really love Dragstrip, definitely the standout of the wave imo. Hopefully the other Stunticons look as good.

3:00 the transparent yellow piece clearly has big tabs going through the black body though? So I dont see how that could be the case. The mold for the yellow part, as it exists in the final retail version of the toy, would never be able to open? And yet, there's a spring there...

Arcee’s tailpipe is accidentally blast effect compatible! They don’t stay on super well depending on which ones you try. Rung’s work best because they’ve got the most space inside for pegs

My ToysRUs got the core class guys and the generations selects (minus the titan), as well as Silverstreak I just don’t have money to get then yet 😢

I feel like the Bulkhead mold could work for TFP Breakdown too

17:33 I think he heard my theory

Wonderful video! What megatron was that in the comparison shots with bulkhead? It seems so clean!

I see an imminent Cybertron universe Legacy Ransack out of the arcee mold on the horizons

"I feel like Motormaster will be the last component we get". yeah that aged well

Man you got those already, there still on preorder for me, but I live in the states so maybe thats why, also your awsome at doing this

This is a great breath of fresh air it just looks like a really cool wave even with the reused characters like blaster or galvatron but that is awaome

Love it man

You should honestly do more long videos like this!

14:23 oh hey it's Uniter Ekimu!

I only hope we get a bunch of fan favorite and obscure characters from every universe.

It's really weird to see how Legacy started off. Skids and an Insecticon? A G1 Bulkhead? Really weird choices. I loved Legacy the moment I got Bulkhead in my hands, and it's still going great today. It was really weird at first, but today I'm like "oh wow a new toy of a random obscure character lol". Not saying it's bad, but I got used to it and that's kinda sad considering that the surprise factor was the focus of this line. We will still get surprises, I'm sure of that, but I will not be as surprised as before

I only have 1.5 legacy figures right now, I love the line. I can’t wait to get my hands on the rest of the line.

I got Bulkhead a few hours ago, and he is great. I don’t know why he arrived today as opposed to arriving on May Fourth, but he is AMAZING!

The cheese meme was what made this video for me.

my bulkhead also has very stiff elbows and it is kind of annoying so your not the only one but its good that skids is finally getting some recognition

I think this is a good start to legacy, but I feel we should wait and see. Rn the variety is it’s greatest strength.

Late to the party and wasn't even aware of most of these until trying to find a Kingdom Prime on Amazon one day. Wasn't too hyped about Bulkhead, but out of the entire wave looked to be the most fun out of the lot. Wasn't disappointed. Great articulation, solid feel, and weapons inclusion. Alt mode is decent, but wheels not being pinned do not roll the smoothest. Though Hasbro went for the Prime character this being a 6 wheeled military transport with a similar built in bot mode feels much closer in spirit to the animated version than the concept SUV he was in Prime. Only other release I'm interested in getting is Blaster, as he's straight up G1, and the closest I have to that is hilariously is the Voyager retooled Soundwave originally a deluxe in I think War of Cybertron or was that the second game? Also really glad they reissued Galvatron in this Wave as never got the Kingdom release or whichever it was.

Yes and no. If the leaks are true Legacy is gonna have some good figures, and I'm looking forward to the Stunticons, but if Bulkhead and Arcee are anything to go by the versions from shows that aren't G1 are gonna be meh and not look how they were in the show. Which is what everyone who wanted the designs from other non G1 shows wanted.

Okay hear me out imagine they retool this into energon prime? Or perhaps energon demolisher

Siege was my favorite. The designs were super unique, they made main characters and some less known characters. The wfc got me back into TF

Fantastic review! Where did u get them already?

I just found legacy blaster and bulkhead at target in FL. Yay

Personally I like to leave those gas canisters in Bulkheads legs out in robot mode to bulk him up a little more

Legacy Arcee was THIS CLOSE to going in the trash, But I couldn't get over her BITCHIN' Alt-mode. A very lucky day for Arcee.

I hope the stunticons and any future combiners in the legacy stunticons style have a new scramble city technique

I've had kingdom blaster on pre-order since January on BBTS but no news for it

I have the Bulkhead figure!!! I Liked the figure a lot!

finally, someone putting respect on the prime universe figures’ names. also, as a canadian, where did you find these? locally we’re stuck at wave two of kingdom

In my opinion, this is a great start to Legacy. Anybody expecting Hasbro to change the aesthetic of each figure to match the media they came from was setting themselves up to be letdown. The energon weapons are a fun edition that are a nice nod to Energon, similar to the Mini-Con ports to Armada. This line is finally putting the “S” in “Generations”, with the reveals and leaks confirming a mix of G1/2, BW, UT, and Aligned Continuity. Another nice touch is bringing combiners back, I just think there would’ve been more excitement for a more popular character than Menasor, though the choice makes sense since his CW figure was definitely the worst of the bunch. In conclusion, too many people are comparing this to the WFC Trilogy based on the first wave, and even if Legacy doesn’t hold up in the long run it’s still shaping up to be great on it’s own. I seriously hope it continues past It’s first year, seeing how plans for this being a trilogy with the first part called “Evolution” has been cancelled.

They are just really dropping the ball on the accessories imo.

3:00 ok now that these toys have finally be released in Australia and I have kickback in hand, I've found something very interesting. What you're seeing as springs looks very different on my copy of the toy. Those could plausibly be springs on yours, like it appears to be one structure coiled around another. But on mine, its very clearly a pin with a series of parallel ridges on it (similar to the pin used in lego keychains if you've ever taken one of those apart.), its one structure. Nevertheless, there remains the issue of the tabs on the yellow piece, and slots on the black piece, that mean this assembly with these molds could never potentially have opened. I wonder if you have a transitional state here, and there's a third variant without those tabs/slots.

“Cheese”-James May

The quality of this figures are really nice for some reason

I got Legacy Blaster and he’s a banger! He’s transformation is unique and I just realised That Toy Guy forgot to flip the legs panels for the side of the Getto Blaster Boombox. He’s so fun to play and he even comes with his cassette Eject! I know, transparent parts are fragile. But,when I transform Blaster, I would ALWAYS transform Eject with Blaster. My next target is Legacy Kickback and Bombshell. I already have shrapnel and he’s also a cool figure! He looks more like a stag beetle then a grasshopper that has visible limbs from the robot mode. I don’t mind getting Kickback but I do wish that they put more effort on Bombshell in the upcoming Legacy wave! But for now, I will wait for Bombshell THEN I will buy Kickback and Bombahell. But overall, Legacy Blaster is fun to hold, fun to play with and easy to transform. This is just my opinion, don’t get mad at me for liking Blaster like “UGHHGhHHhHyhygYug SoUnDwAvE iS bEtTeR tHaN bLaStEr!1!1!!1”.

Bulkhead reminds me of animated bulkhead

I was fine with the legacy bulkhead since I know bulkhead is a fan loved character so in the future there will eventually be a prime accurate bulkhead and I'm fine with waiting becuase wfc is about g1 designs

I love the drakstrip and my First place is bolkhead

8:08 its ironic because arcee is supposed to be dark blue, so the redundancy could still be avoided and both toys would have been better for it

That war for Cybertron figures was really cool I hated the way they added those war-torn paint apps. I got Mr.Color leveling thinner and some wooden cotton swabs and I took off all of those paint apps that I didn't like even those that tried to mimic the shattered glass crap. Don't get me wrong I do like the comics for it but Hasbro is very cheap with its paint apps and they think it's out of this world better than 3rd party stuff. This stuff didn't ruin the plastic either I just would rub some off then wash it off then let it dry and after a couple of days, I work on the harder stuff until it's all gone. I do need me some Pipes tho got to find him.

Just a minor note regarding Kickback. The part formed by the swords is the abdomen, the thorax is the primary segment where the limbs attach. Head/thorax/abdomen, front to back. Also serious thanks for showing that the swords plug in there, I was about to toss them!

Kickback : you meant an "abdomen", not a "thorax". Blaster : you forgot to turn the boomers on his shins.

They are very Cartoon Accurate Big Time

Bro my dragstrip is so good that I didn't know the waist popped out.

and now im about to die of the fact that hasbro hates my location

I was curious about something. I have dragstrip and when I transform him into car mode, I have a hard time putting the back tabs (the ones that connect both halves) into place. Do you have this problem, also the waist wobble a bit

Imagine if they get all of the og voice actors from the other transformers shows

Gotta be honest I was in the bulkhead hate group, but when people finnally got him in hand and started taking better pics of him. And when I got him. He's definitely my favorite mainline fig I got in a while. Legacy line is definitely a line I'm looking forward to

Man I can’t wait for legacy menasor

Literally just bought a skids and I love him so much 10 out of 10 figure

I want the Bulkhead mold to be redone as Beast Hunters Optimus Prime.

I DO have the FE Prime Bulkhead…. and I love Legacy Bulkhead. Like, TO DEATH. In my opinion, FE Bulk is more about show accuracy, but honestly? It’s not as fun as a toy. Like, honestly. FE Bulk reminds me of a MP toy, in that as far as poseable show accurate look, it’s got that and more. Masterful engineering in the transformation, check. But… it’s not as fun. If anything it’s kinda fragile. L-Bulk on the other hand; that thing is designed to be PLAYED with. Like, it’s got multiple weapons, it’s got all sorts of ports for compatibility; FE Bulk has his mace you can plug onto the end of his arm or on the back of his vehicle mode like a giant butt pimple, with no way to store it anywhere else. Much like a lot of modern MPs tbh. So. Yeah, FE Bulk is A+ for show-accuracy, Le Bulk is for playability.

My Skids’s door wings broke.

Galvatron is just a repack without the battle damage, but that optimus... ouh does it look good

I feel like this is the best 1st wave in terms of rosters

4:16 my guy doing pushups wrong💀

The Purple Wing pieces can tab into the wings on Kickback

Someone made the argument that Legacy Bulkhead was supposed to be Animated Bulkhead because of the altmode and the truck chest except Hasbro decided to use Prime's Bulkhead for the head because of how much more known he is.

rotate the speakers on blaster's shins when you have the panels flipped out

Gimme dem beast wars toys boiiiiii

The reason bulkhead looks like movie hound is because originally movie hound was supposed to be bulkhead

Sorry to bring that up, but I'm a biologist and I must do it 😅. The swords on Kickback actually form the abdomen. The thorax is where the legs and wings are attached in real-life bugs. Great video again! Hope you do more,as they are always entertaining!

Legacy line is doing great so far!Love what they had done..have 3 out of 5 stunticons & they are epic solid figures! I think siege,earthrise,kingdom,86 and now legacy have a good amount of figures.Not all are perfect but acceptable solid FUN figures to enjoy. I think they have improve so much from POTP,TITAN RETURNS & UW/CW.That was abit of a hit and miss i would say..

All kinds of transformers fans definitely want different things all good though