Is Nothing hiding Something under the Glass?!

Is Nothing hiding Something under the Glass?! - Teardown!

Рет қаралды 1,777,973

Жыл бұрын

Its time to take apart the Nothing Phone! Thank you to Jurassic World Dominion for sponsoring a portion of this video. Jurassic World Dominion Extended Edition is yours to own on 8/16. uni.pictures/JWD You can find their KZfaq here: / jurassicworld Thank you #JurrasicWorldDominion! Even though we can see some aspects of the Nothing Phone (1) from the outside... We cant truly see what's going on without analyzing it from the Inside. Today we find out how the Nothing Phone is put together and maybe even how many LED lights make up the glitch below the clear glass.
Get my Shirts and Razor Knife here! www.jerryrigknife.com/
Anker is named as the Official Charging Partner of JerryRigEverything: ankerfast.club/JREpartnership
Follow me for updates!
Instagram: / zacksjerryrig
Facebook: on. 1U4bQqv
Twitter: / zacksjerryrig
LARGE tool kit: amzn.to/2DURcr7
Travel Tool Kit: amzn.to/30LKXOY
Mega Tool Kit: amzn.to/2OwequL
Plastic Pry tools: amzn.to/1Tu57pI
Metal phone opening tool: amzn.to/1WdOFv0
Replacement phone parts: www.fixez.com/?Jer...
The camera I used to film this video: amzn.to/2p7GtkX (GH6 amzn.to/3LyfW8d)
The Lens I used for this video: amzn.to/1QOXDw2
Wide angle lens: amzn.to/2qiYM4u
And this Metabones adapter: amzn.to/2iZ67Ty
This is the drone I use: click.dji.com/AI2tmSb0onM9XPV...
TO SEND ME STUFF: See my P.O. Box on my 'About page': / jerryrigeverything
JerryRigEverything assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. JerryRigEverything recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of JerryRigEverything, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not JerryRigEverything. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.

Пікірлер: 2 700

@MrHushCrush Жыл бұрын

Wow can’t imagine getting sponsored by a movie company.

@user-sn9od2cy4v Жыл бұрын

@UnfaithfulEvil 🅥 no

@abhichandandas44 Жыл бұрын

@UnfaithfulEvil 🅥 eat tart

@prabhasmaloth6538 Жыл бұрын

@UnfaithfulEvil 🅥 no + 1

@Zack-hm6pi Жыл бұрын

@UnfaithfulEvil 🅥 why don’t you have any subscribers then

@Zack-hm6pi Жыл бұрын

@UnfaithfulEvil 🅥 why do you comment on each popular video

@libertarian1637 Жыл бұрын

The great majority of windshields are simply held in with just adhesive. Adhesive can be quite strong, especially when installed under clean room conditions. 3M VHB actually is used to hold in skyscraper windows and can also be used as the sole attachment method for enclosed trailer sides. You can have bad adhesives and bad installs which can lead to failure or can try to have adhesive hold beyond its limits, but when using proper adhesives you can build things almost indefinitely; let’s not forget mortar is at its core an adhesive linking concrete blocks together and has seen homes standing on these foundations for generations.

@prasanganeupane1889 Жыл бұрын

Immense knowledge in a single comment 🙏

@SecularDarwinism Жыл бұрын

Really surprised that Jerry didn't know or at least take the time to look into this.

@vaughangilligan2000 Жыл бұрын

This is just a drop in the ocean compared to the knowledge in your comment, but the 3M number plate tape for cars is some really strong stuff. I know cars that have had the same adhesive on their plates for years with no issues.

@MrSkoobii666 Жыл бұрын

A lot of structural componants like firewalls in cars are held in by adhesive as well instead of being welded

@ravoyax8317 Жыл бұрын

@@vaughangilligan2000 VHB Tape is also widely used in fpv drones to hold small parts.

@eatcarpet Жыл бұрын

Gotta say it has one of the cleanest internals.

@FlorinArjocu Жыл бұрын

80k likes already, enjoy counting the LEDs! 😀 Liked the challenge.

@shubham7668 Жыл бұрын

121k now😂

@subyob Жыл бұрын

@@shubham7668 130

@authenticabirofficial4636 Жыл бұрын

131k now

@INDIANBEA5T Жыл бұрын

132k now lmao and he did count them 8 months ago lol

@FlorinArjocu Жыл бұрын

@@INDIANBEA5T Yes, the comment was wtitten 8 months ago, before counting them.

@Xiaotian_Guan Жыл бұрын

3:30 'adhesive on its own usually doesn't last forever.' Samsung: hold my battery 🤣

@JerryRigEverything Жыл бұрын

Valid point.

@LolSho0orTs Жыл бұрын

@@JerryRigEverything got ya

@qqii Жыл бұрын

@@JerryRigEverything another example is the adhesive between the glass and frames of phones? In normal operation the adhesives don't suffer from upwards lifting forces (which they are weaker against if concentrated) but tiny side to side (which they are very strong against). Looking at the design I suspect adhesives were chosen for thickness, weight, and practicality. Screws would have been much bulkier and heavier. Plastic tabs would have added thickness. An adhesive is also the most practical for bonding disperate materials. Although there are some negatives in terms of repairability there's rwaosn adhesives are so ubiquitous from phones to car windscreens to even airplanes!

@Dhruv99Pathak 2 ай бұрын

@@JerryRigEverythingi have a dead nothing phone 1 lying around and i use a 15 pro max. i was wondering if theres a way to dismantle the glyphs, mount them on a case or whatever and reprogram them to be able to use them w another phone? obviously the power source would have to be the usb c of the phone but just wondering if you think its possible? as your motto is "life is a diy project" 😃

@UpToDateIDN Жыл бұрын

Love the "Pokemon" joke 🤣

@smashed_penguin Жыл бұрын

The battery may be easily removable but it seems like it would be quite difficult to get to it without scratching or bending any of the pieces that make up the back.

@ArthurTheSecond Жыл бұрын

Btw, if you add the contact "Abra" to your phone and go into the ringtones settings of the glyphs and set Abra to your custom contacts, it will unlock the music visualization in the glyphs setting. Its pretty fancy

@sensible4170 Жыл бұрын

I don't think the adhesive would become a problem unless the owner kept on tearing the phone apart.

@beepboopthemyth Жыл бұрын

Adhesive wears down over time especially with heat from the phone

@xxzenonionnex7658 Жыл бұрын

@@beepboopthemyth literally nothing will happen unless you go taking it apart for no reason. Car Windows don’t randomly start falling off. You back glass doesn’t randomly fall off apple and Samsung phones so why would this be a problem

@beepboopthemyth Жыл бұрын

@@xxzenonionnex7658 bruh you’re actually dense A literal expert has said it’s not enough.

@thecircleoflove7557 Жыл бұрын

@@beepboopthemyth the adhesive used in phones is sufficient to hold things in place throughout the lifetime of the phone. Except you choose to break the seal, then you're sure to expect issues with it.

@thecircleoflove7557 Жыл бұрын

@@beepboopthemyth it's not like your phone will be producing heat forever. What happens when you don't use your phone?

@Nanischwein Жыл бұрын

"But while i'm mean to phones i am no monster..." *usually* Laughed my ass off xD 8:32

@praveenakio Жыл бұрын

He is the monster..🤣🤣

@gyanpunji Жыл бұрын

04:35 now you get more than 130K likes, need a video on counting LED lights😁😁😁

@1tan_freed0m Жыл бұрын

The way the components are sitting in place is so pleasing to watch. And I think best android phone design ever when tearing apart. Cuz almost all Androids doesn't have very attractive internals

@damnfreakingsien Жыл бұрын

I agree. Aside from iPhones, Nothing phone have the most interesting looking internals.

@MohamadJavadJ Жыл бұрын

4:25 Guys we have a mission to do

@RaulLimaPT Жыл бұрын

Come on.. 50k likes.. now I wanna see Zach counting all those LEDs 🤣🤣🤣

@headhunter531 11 ай бұрын

This is the first sponsor announcement portion of a video i've ever watched without skipping.

@eemoot Жыл бұрын

00:12 haven't seen Zack this satisfied and happy

@theking-el4gf Жыл бұрын

Jerry 4:30 thats when he knew he screwed up 😀😀😀.

@kevinwells4986 Жыл бұрын

Watching you do these disassemblies is amazing. As a guy that used to design some of the first computer motherboards (not the very first, but close) I could still, back then hand solder components, and not need magnification. I owned a company that continued this design work, as things shrunk and shrunk, and my vision deteriorated. I fixed that with consultants of course, and various contractors. It's still amazing to me to witness what you can do in your videos. For me designing circuit cards, and hybrid chips was just a matter of magnification in the CAD system, but for you to do what you do... it's still just amazing. Have I said amazing yet? Thanks for another great video.

@abigairey9543 Жыл бұрын

Wao Mr. Kevin that is amazing

@sztrlb123 Жыл бұрын

finally, waiting for this video since very long.

@nickalexanderthe3rd Жыл бұрын

I really feel the fascination for the movies haha, love them all

@Liz-iy7sc Жыл бұрын

I like how companies are paying more attention to internals by adding Easter eggs because of your videos.

@theairaccumulator7144 Жыл бұрын

Nah just engineers having fun, especially in a novelty phone like this, no one cares about his videos.

@QDetective 10 ай бұрын

pokemon

@Arenabreakout_shorts5200 Жыл бұрын

6:58 RIP SAMSUNGS 😁🤣

@paulosousa8120 Жыл бұрын

It's always a pleasure watching these videos

@ajaykrishnajs3207 Жыл бұрын

I am so glad to see that you can handle a phone calmly

@realrocky2068 Жыл бұрын

Zack loves transparent technology so much that he dyied his hair transparent 😀

@mehshutup3041 Жыл бұрын

DAAAAAAAAMNNNN GOTTTIM LOLOLOLO F

@watema3381 Жыл бұрын

"Hahaha he's bald" 😐

@realrocky2068 Жыл бұрын

@@watema3381 really 🤨

@watema3381 Жыл бұрын

@@realrocky2068 You really got the whole squad laughing 😐

@SplashingLebron921 Жыл бұрын

@UnfaithfulEvil 🅥 nobody asked

@gandalfdergraue8444 Жыл бұрын

7:45 I love, how they put the USB port right on the cable, it makes the port so easy to replace, as it's probably the component with the greatest wear&tear right after the batterie..

@LaidBackDeveloper Жыл бұрын

It's not out of the ordinary. Most phones do it

@gandalfdergraue8444 Жыл бұрын

@@LaidBackDeveloper You mean, most modern phones... Right, they eather put them on a daughter board or right on the cable...

@re-fix9678 Жыл бұрын

thank for video so cool video😊😊

@alial-zergani7858 Жыл бұрын

Wow congrats Zach that’s so cool I’m excited

@alenpasnikov Жыл бұрын

8:06 that 😄

@Ind-VIDENCEPvtLtd Жыл бұрын

😄

@dariosaviors Жыл бұрын

Pretty clean assembly. And yeah, those little screws on the first layer are jewels.

@ytgameraj1079 Жыл бұрын

Your voice... is so much aesthetically pleasing that I'd sleep while listening 🎧🎶

@Al-ex92 Жыл бұрын

This guy is so good And so comedic too

@tsukibus Жыл бұрын

You seem so happy with your sponsor, like you’re genuinely excited about it. I’m so happy for you! Congrats!

@vuilnisgod4388 Жыл бұрын

Yea too bad its ab a dog shit movie lmfao

@Kosackk Жыл бұрын

He looked pretty sad imo, who wouldnt...

@bramweinreder2346 Жыл бұрын

@UnfaithfulEvil 🅥 who's Jerry?

@lordzuzu6437 Жыл бұрын

laughs in sponsorblock

@rinnegone377 Жыл бұрын

@UnfaithfulEvil 🅥 lol who tf is jerry

@ouch1011 Жыл бұрын

I’d imagine that the rear glass sandwiches most of the adhesive attached items, so they aren’t going to come loose unless the rear panel falls off.

@LuisitoPR69 Жыл бұрын

Can't wait for the Teardown of the Something Phone!

@hast3 Жыл бұрын

This is is the first sponsored segment that actually interested me, great job man!

@__-wl6be Жыл бұрын

"Just like a little lego"-never gets old😹

@janwillemdegroot2416 Жыл бұрын

honestly, this is one of the best looking phones i've seen in quite some time

@sebastianluraniec1489 Жыл бұрын

@Jack Costabile Minus the most important one - screen!

@Abhishek._.0101 Жыл бұрын

First sponsor video that i didn't skip😀

@feelitnj Жыл бұрын

These king of videos are very helpful to other people to spend their money on a good device....thanks for doing that....🔥🔥🔥🔥👍👍👍❤❤❤love from Sri Lanka

@RaedVS Жыл бұрын

"And honestly, having a rattling piece of plastic under the glass would be kind of cool, makes for a good conversation starter." - Can vouch. I carried my old bent phone for almost 2 years before finally finding something worth upgrading to, and people would casually ask me about it all the time lol, great ice breaker.

@farismamnoon1652 Жыл бұрын

How did it bend tho

@RaedVS Жыл бұрын

@@farismamnoon1652 I slammed it on the floor after a pretty intense phone call, didn't break, just got bent. Was an absolute unit of a phone.

@morpheon_xyz Жыл бұрын

To be honest, they've definitely done something different on nothing, and I like it! This teardown has definitely been interesting due to the different way this phone's been assembled and put together. Congrats on the sponsorship too! 😋

@FriendlyPCGamers Жыл бұрын

Shitty phone for sure....

@whyiseverysinglehandletaken2 Жыл бұрын

@@FriendlyPCGamers It's literally their first what did you expect

@gundo3569 Жыл бұрын

It's not really that interesting, apart from the led strips and covers for the exposed chip, it's pretty much the same. You can DIY your glass back phones to achieve all of this except the led strips.

@EazyDuz18 Жыл бұрын

@@FriendlyPCGamers Copium from a pleb who cant get his hands on one 🤣

@AbsoleteAim Жыл бұрын

@@FriendlyPCGamers Do better then

@Call_Me_Zain Жыл бұрын

8:33 that scarred the hell out of me 😂

@plageran Жыл бұрын

gotta love their design and aesthetics XD

@gdmaksy4991 Жыл бұрын

Been waiting for this video since the durability test, very exited!

@purpleweed Жыл бұрын

0:11 yesssss 🤣🤣

@lukewt456 Жыл бұрын

The most ascetic teardown of 2022 for sure.

@sponsito Жыл бұрын

71K likes at the time I am watching the video. Have no patience for the counting video. Great job again!

@A_Jung Жыл бұрын

40k likes in just 3 hours after uploading! 👍😳 Looks like Zach should already start looking for his magnifying glass 😅😂

@bhaskarjyoti Жыл бұрын

LOL 🤣

@lotannaokogbuo3827 Жыл бұрын

82k Likes. 😑 I’m expecting the numbers any time now

@just5345 Жыл бұрын

😂 😂 😂 😂 he will definitely going to regret saying that

@abelmesfin4848 Жыл бұрын

Still no counting video 😢

@callmesnowyyy4511 Жыл бұрын

3:35 the silver schrews LOL

@fannymcfee69 Жыл бұрын

I was really happy to watch the sponsors because it was really cool to see a movie company sponsor you

@utpalmandal2478 Жыл бұрын

Wow ! I love Nothing phone's camera. Cool tone and aluminium frame.

@Shaffye Жыл бұрын

You know damn well we want you to count all the pixels!

@kargi42 Жыл бұрын

Zack complains about longevity of adhesives inside, but forgets almost all phone's backs are taped for years now.

@leonardotilaro_Ford.Mustang Жыл бұрын

7:20 beautiful the writing "Pokemon" on the connectors😂

@bigman2410 Жыл бұрын

I love that fact that the inside of this phone isn't like the other androids, but like apples, and i have to say, its beautiful

@TAMusic Жыл бұрын

I’m pretty sure the LEDs on the back only show your battery percentage when it’s flat on the desk, not when you’re holding it. Great video as always!

@martinxx2621 Жыл бұрын

You also have to activate it in settings AFAIK, because it isn't by default

@vedanshchn Жыл бұрын

Nahhh mine shows right when I connect the charger even when it's in my palm.

@III-zy5jf Жыл бұрын

Jerry cheated on his wife

@MarinKitagawa2 Жыл бұрын

@@III-zy5jf fr?

@ethanlamore2236 Жыл бұрын

@UnfaithfulEvil 🅥 your subs don't say so

@aleyammathomas9956 Жыл бұрын

9:10 if this video gets over 50k likes i"l count all of the internal led's After 12 hours: the video gets 65k likes Come on jerry count all the led's waiting for the video

@thefamouskid Жыл бұрын

5:32 "while doing the surgery the patient is still awake" was epic 😄😄😄👍👍👍

@_p_r_a_b_a_l_5694 Жыл бұрын

it is actually most funny phone i have ever seen . and this man maked it moree funny .

@James_____ Жыл бұрын

one of the coolest teardown videos i've ever watched

@Den_Pro09 Жыл бұрын

@UnfaithfulEvil 🅥 unfarithevil sucks jerry fliming better haha

@AhmedSaeed97 Жыл бұрын

Jurassic Park is probably my favorite movie. Classic!

@techeduka2806 Жыл бұрын

very amazing journey from 0.00 to 9.46 *****

@matiasisola9391 Жыл бұрын

daaamn i missed a great vid like this

@_amrbadr_ Жыл бұрын

note about the charging light, it turns off automatically so it doesn't waste power, in order to see the progress you have to shake the device horizontally.

@jaithakkar5058 Жыл бұрын

Can't wait for him to count the LED😭😭😂

@KenjiSan_k9 Жыл бұрын

You know what's under the glass ? - NOTHING

@parpo1 Жыл бұрын

i was waitin for this

@GFourGadget Жыл бұрын

This is the only phone that doesn't need a Dbrand skin 👍🏾 on a side note, kudos to Nothing for making their battery easily removable. More companies should really do this.

@pcteo7297 Жыл бұрын

Yeap

@JatPhenshllem Жыл бұрын

@@pcteo7297 Reap

@Phenom_Lightwing Жыл бұрын

Not even a "Something" skin which Dbrand says is "Better than nothing"?

@mohameddiwani6328 Жыл бұрын

Some Oppo phones have the same style. And Xiaomi also

@kidShibuya Жыл бұрын

Its not easy when you need to take off the back glass, then good luck putting it back on while keeping the water protection. My LG v20 had a truly easily removed battery, it was a matter of pulling down on a back panel and swapping the battery. Nothing get no bonus points for their battery, it's still too difficult to replace.

@animatingstudio3146 Жыл бұрын

Hey Zack, love your content❤

@snlsp12 Жыл бұрын

love for Jurassic Park!!

@zusiarosenthal4674 Жыл бұрын

@JerryRigEverything you said at 50k likes you’ll count all the leds. It’s at like 150k now. We need the video

@skmgeek Жыл бұрын

can't wait to hear you count all those LEDs ☺️☺️☺️

@skaizek4919 Жыл бұрын

I'm really interested if transparent back of this phone has some kind of transparent protective, sticky layer to keep glass in one place if you accidentally broke back glass of your phone. If not there would be a lot of micro shards of tempered glass everywhere :C

@mohammedhegdah Жыл бұрын

I think you should search for a drop test

@mohammedhegdah Жыл бұрын

@Hermann[best channel] what does that have to do with this comment

@yuvan5717 Жыл бұрын

@@TorchCTI his question stands

@simonholmqvist8017 Жыл бұрын

That obviously wouldn't be good, but it would make replacing the glass easier.

@CringePoop Жыл бұрын

@@mohammedhegdah its a bot. simply report the bot and dont give it any other attention

@JwaleetPainter Жыл бұрын

I can just imagine Zack counting all the LEDs after this video had already crossed 50k mark while I was watching the dissection.

@yakshjhaveri8411 Жыл бұрын

After realising that " i'm a monster to phones but cant say that😂😂😂 " and adding "USUALLY" in tbe video by edit was amazinggg😂😂😂😂😂😂🔥🔥

@electrofreak0 Жыл бұрын

Zack: Finds "Pokémon" on the ribbon cables Nintendo's lawyers: "That's enough for us. Suit up boys, we got a live one!"

@LolSho0orTs Жыл бұрын

imagine that happens lol.

@rubnpopoviciu Жыл бұрын

I personally would love a durability test/teardown of the zenfone 9

@charlesrock1328 Жыл бұрын

Great teardown are satisfying to watch

@stevesathit Жыл бұрын

The only channel I trust to ranked device durable please can't wait to see what z fold 4 is improving over year

@TheAzeez Жыл бұрын

TBH I'm impressed on how much they put into the back design and doesn't cost a fortune.

@far0ss0 Жыл бұрын

5:03 is it just me or does this little piece looks like an elephant?!

@shoelays Жыл бұрын

I thought I was the only one 😂

@DevduttShenoi Жыл бұрын

So excited for Jerry to upload/stream a video literally counting each LED on the back. FOR SCIENCE XD

@S.T.I.C.H.A.N.T Жыл бұрын

I can't wait for him to count the led

@chriskabigting Жыл бұрын

I didn't expect to see Pokemon-labled cables lol. I think there will be a possible calibration issue with the fingerprint scanner after putting it back together. I saw that on another teardown vid. But I'd say this is a great teardown overall.

@dtay8913 Жыл бұрын

Was it Hugh Jeffery?

@DarkGT Жыл бұрын

@@dtay8913 Who else will attempt repair on non broken device? Jerry(Zack) is just a poser who won't a video unless he is sponsored.

@CockroachMunchingKrabbyPatty Жыл бұрын

@@DarkGT god forbid a content creator not make a video if he isn't paid well. do you go to work for free? lmaoooooo

@DarkGT Жыл бұрын

@@CockroachMunchingKrabbyPatty How about the ads? Is sponsored crap really necessary when you have 7.42 million subscribers? Some content creators have full time job and this is just a hobby. Some do really do videos just out of joy, no ads or sponsors.

@braders5192 Жыл бұрын

The fingerprint thing only happens if you swap the sensor to a different motherboard.

@ThomasT Жыл бұрын

Bro already got 50k likes Good luck

@rahulsaha2859 Жыл бұрын

Now we need a video of you counting each LED

@housseine_Doucoure3 Жыл бұрын

The amount of the glue in the phone makes it really a "Nothing" phone.

@dontreadmyaboutsection3350 Жыл бұрын

9:18 rumor is 900...but maybe....IT'S OVER 9000!!!!

@nakdickson Жыл бұрын

8:42 "all of the somethings that make up nothing" 😎

@ultimatesunrise Жыл бұрын

I better get a JERRY Ad on my Jurassic Park Blu-ray

@danarmuhtofa5264 Жыл бұрын

I think this phone have one of the most complicated structure, they did great job

@energy2001 Жыл бұрын

Tearing down nothing? Thats certainly something

@Undecimal. Жыл бұрын

in case you did not know by now. The charging LED has to je activated in the settings first!

@ferotakis Жыл бұрын

The inner child joy is clearly visible in your eyes. 🦕 🦖👦🏻

@eklypse180 Жыл бұрын

Achievement unlocked!!! Well done man!

@TheKeviniraheta Жыл бұрын

2:07 video starts

@CringePoop Жыл бұрын

if you get sponsorblock you can just skip to the part of the video most people marked as where it "starts"

@fietae Жыл бұрын

@@CringePoop well im on my phone so i appreciate his comment

@jerospal Жыл бұрын

To use the exclamation mark feature, you have to move the phone side to side while it's plugged in.

@legion1791 Жыл бұрын

What a cool sponsor; never seen that before on KZfaq!

@jimbobertson4549 Жыл бұрын

I have a teardown grip case from DBrand on my iPhone XR. The amount of conversations that that darn case has started is amazing. One of my best purchases