Is the US General Gen 3 72” Toolbox worth the cost??

  Рет қаралды 1,886

GlovedUp Garage

GlovedUp Garage

2 ай бұрын

I have upgraded to the US General 72” roller cabinet from Harbor Freight. After the video was made I priced two builds through my Snap On dealer. A similar style box in the Masters series would be $25000, while the Equos Series would be $22750. Snap on does have some cool options, but this is a little over 10% of the cost of a Snap On.

Пікірлер: 11
@stephendavis7812
@stephendavis7812 Ай бұрын
Those draw locks can be removed. I have a few US general boxes in my shop. I removed those plastic stripps and have them stored somewhere. Makes the boxes more pleasant to use.
@GlovedUpGarage
@GlovedUpGarage Ай бұрын
I figured out how to get them out after seeing a post in the Harbor Freight Hacks group on Facebook. I removed the rubber pad on top to install the hutch, but now it slides a little bit. Thanks for the tips, and thanks for watching!!
@paulmysliborski4832
@paulmysliborski4832 2 ай бұрын
You're going to have a killer set-up with the 72", the hutch, and those two end lockers. Congrats!!
@GlovedUpGarage
@GlovedUpGarage 2 ай бұрын
Thanks!! I’m definitely looking forward to it. Thanks for watching!!
@bnorby213
@bnorby213 2 ай бұрын
Literally just ordered the exact same setup in white! Very nice
@GlovedUpGarage
@GlovedUpGarage 2 ай бұрын
I’m excited to get this all put together!! Thanks for watching!!
@bnorby213
@bnorby213 2 ай бұрын
@@GlovedUpGarage only thing I might get is a set of caster spacers to bring it up a bit so I can use the hutch more comfortably
@marksmith9181
@marksmith9181 9 күн бұрын
You don’t have to cut the end off just remove the whole piece it’s easy I did it on my box.
@GlovedUpGarage
@GlovedUpGarage 9 күн бұрын
I figured it out finally, but thanks for the heads up!! And thanks for watching!!
@DownloaderVideo
@DownloaderVideo 2 ай бұрын
Correction here brother, the other models are not the same height due to different casters sizes being used depending on the model....they could possibly be modified to make them match but they are not out of the box.
@GlovedUpGarage
@GlovedUpGarage 2 ай бұрын
I missed that part about the casters on the smaller boxes, they aren’t cheap either. Thanks for pointing that out. I’m still very pleased with the box. Thanks for watching!!
US General Series 3 56 inch VS Husky 56 Inch Toolbox
15:27
Bearded Reviews
Рет қаралды 45 М.
ROCK PAPER SCISSOR! (55 MLN SUBS!) feat @PANDAGIRLOFFICIAL #shorts
00:31
1 or 2?🐄
00:12
Kan Andrey
Рет қаралды 38 МЛН
Can You Draw A PERFECTLY Dotted Line?
00:55
Stokes Twins
Рет қаралды 91 МЛН
Building a DIY Solar Pergola | Step By Step
16:43
ChumpChangeXD Mining & Crypto
Рет қаралды 39 М.
US GENERAL SERIES 3 72” UNBOXING
18:27
SomeKidsGarage
Рет қаралды 1,3 М.
New Us General series 3 56” roller tool Cabinet!!!
8:11
Learning diy On the Fly
Рет қаралды 16 М.
US General Series 3 Toolbox Cleaning - The RIGHT Way!
8:03
Demo Dad
Рет қаралды 2,4 М.
HANDYMAN TIPS AND TRICKS THAT REALLY WORK
21:46
TechZone
Рет қаралды 1,1 МЛН
@harborfreight US General Series 3 Hutch & Toolbox Modifications
22:46
bonecrrusherSS
Рет қаралды 1,2 М.
U.S. General Series 3, 72” Roll Cab & End Cabinet Review
8:44
Butterfield's Automotive & Diesel Repair
Рет қаралды 5 М.
this single print paid for my 3d printer
17:49
The Swedish Maker
Рет қаралды 121 М.
56in Harbor freight us general series 3 tool box
10:59
Making mistakes with Greg
Рет қаралды 14 М.
U.S General Series 3 72in. (Harbor Freight) Tool Box Build.
8:20
Wilson Woodrow
Рет қаралды 9 М.
ROCK PAPER SCISSOR! (55 MLN SUBS!) feat @PANDAGIRLOFFICIAL #shorts
00:31