Is this the Best Beginner Airbrush ?

Рет қаралды 55,856

Күн бұрын

In this video I take a look at the GSi Creos PS 289 procon boy, double action airbrush. As well as unboxing, I run this airbrush through some spray tests to see if this airbrush is or could possibly be the Best Beginner Airbrush ?
👉🏻CHECK OUT OUR ONLINE COURSE :
airbrushasylum.thinkific.com
👉🏻Tip Drying tips :
• Airbrush Tip Drying | ...
👉🏻GSi Creos PS.770 unboxing video :
• GSI CREOS MR.HOBBY PS....
👉🏻 New to Airbrushing start here :
• Airbrushing for Beginners
👕Check out our Merchandise & airbrush related clothing :
teespring.com/stores/airbrush...
*The GSi Creos PS-289 Procon Boy Airbrush was supplied to us FREE for use within this video, no other monetary payment was made*
**The links below contain affiliate links which means that we receive a small commission for any qualifying sales. Thank You ;)
Gsi Creos PS.289 : amzn.to/3pd0Mzu
Buy From SprayGunner visit :
spraygunner.com?aff=9
For more info or to purchase the airbrush shown in this video :
spraygunner.com/gsi-creos-mr-...
🎨 Check out Canva for simple graphics, image editing, video elements, stock images and more, try it FREE or select one of their paid plans for more features (affiliate link) :
partner.canva.com/4er9X0
🎵 Music used in this video by Filmstro, get all your royalty free music by signing up using the following link (affiliate link) :
- filmstro.com/lifetime-license...
📺 Want to grow your KZfaq channel ? We use TubeBuddy, try it FREE or select one of their paid plans for more features (affiliate link) :
www.tubebuddy.com/asylumcrew
🎥 Other product mentioned in this video include (affiliate links) :
- GSI Creos PS.770 : amzn.to/371Voju
🤔**Want more from Amazon? sign up to a FREE PRIME trial (affiliate link) :
amzn.to/2Gxfdro
Video Chapters :
0:00 - intro
0:11 - airbrush unboxing
2:47 - quick double action tips
3:17 - airbrush spray test
4:51 - spray test results
5:16 - thinner paint spray test
6:51 - adjusting airbrush mac valve
7:28 - lower air pressure spray test
8:52 - tiny skull airbrushing
11:18 - airbrushed skull close up
For more info on Trident paints or to purchase online (Australia only) visit :
www.airbrushasylum.com.au/sto...
To purchase Trident paint (international sales) visit :
www.dna-paints.com/trident/?a...
For more artwork, courses and supplies visit us @
www.airbrushasylum.com.au
Affiliate Links to products mentioned in this video :
www.amazon.com/shop/airbrusha...
To view our video explaining our Amazon Influencer page visit :
• Our NEW Amazon Influen...
**The above contain affiliate links which means that we receive a small commission for any qualifying sales. Thank You ;)
#airbrushasylum #gsicreos #spraygunner

Пікірлер: 96

@AirbrushAsylum 3 жыл бұрын

👉🏻 New to Airbrushing start here : kzfaq.info/sun/PLkd3s0ymmV0OKlXI7wEma4Z4ntvXMs9jv

@MotorGuyzer Жыл бұрын

Thank you for providing all this excellent content. What fantastic channel. For someone just getting started you are providing so much valuable information.

@labradoodleparadies Жыл бұрын

A very fine, concise and informative review. Well done.

@DarksouIjah 2 жыл бұрын

Nice review. I just got mine today and I’m excited to give it a go.

@stefanschrupp6994 3 жыл бұрын

Hello, I'm having the text translated by the google translator, I'm from Germany, Bavaria, and I really like your videos. I am a complete beginner and think your explanations are great, I even understand you quite well with what I learned about English in school over 30 years ago. Thank you for that and I look forward to every video from you. Greetings Stefan

@AirbrushAsylum 3 жыл бұрын

That’s great and I hope the translations come through well enough from google 👍🏻 my parents are actually both from Germany and I can speak it but to go through and translate everything would be a huge undertaking...thanks again for the kind words and glad you enjoy my vids 👍🏻 Alles gute von Australia 🇦🇺

@stefanschrupp6994 3 жыл бұрын

@@AirbrushAsylum if you speak German, you can make a video in German😁😁😁. thank you for your answers and greetings to your parents and many greetings from Bavaria🇩🇪

@AirbrushAsylum 3 жыл бұрын

@@stefanschrupp6994 thank you SO much...I would have to make a separate channel ie..Airbrush Asylum Deutsch as otherwise I think our English speaking viewers would be totally confused lol 😂

@tjebbosteenhof4599 3 жыл бұрын

Very nice vid. 👌 Instead of buying this airbrush, I went for the badger renegade krome. After seeing this vid I want this airbrush also. Thanks. 👍

@BrusHstroKeZ 3 жыл бұрын

This is my favorite airbrush. It was love at first spray! Nice demo.

@AirbrushAsylum 3 жыл бұрын

Yes it’s awesome I was amazed how well this performs at such a great price 👍🏻

@justinsane332 3 жыл бұрын

yeah irs a cadillac

@1mwebster 3 жыл бұрын

When I fist started ABing I was gifted a Passche VL the lines I could pull on that were pretty amazing or so I thought and yup there's a big difference between siphon and gravity flow but I also brought a Veda WD180 for about 25 quid from China, what detail you get from that is fantastic, just as good as I get from my Kromes, have you tried a WD180 by any chance, granted I stripped it down Regdabed it all PTFE'd the nozel, tip etc I still use it now 7 years later its honestly one of the best and most surprising buys I have ever made pal. The quality of the build was really good I was extremely surprised at it, it hasn't gone wrong once and the spares are good to, I'd recommend it to anyone starting off, and if you haven't tried it pal I'd say its well worth looking at for people starting on a shoestring budget like I was, and with how strapped for cash everyone is today, its well worth it for a beginner AB

@AirbrushAsylum 3 жыл бұрын

Thanks for your comment and appreciate you sharing the info re : the WD180 (in response to your question I have never used one) I’m sure there are many more examples of this, where someone grabs a cheaper brush and finds that it performs well. Always interesting to hear how people come across a brush that they love and are still using it years later as generally that’s what concerns me about the cheaper Chinese brushes , they may perform well out of the box , but will they stand the test of time 🤔 Funny that you started with a Paasche VL, so did I and yes the number 3 needle for me was the best all round performer....then I found a gravity HPC iwata and I have never looked back 👍🏻

@EclecticWizard6 20 күн бұрын

looks amazing those details are insane.

@AirbrushAsylum 19 күн бұрын

Thank you 🙏🏻

@eldiablo5092 3 жыл бұрын

Love the look of this brush. I have a Eclispe CS which i've yet to use. Want to get extremely fine detail. Is this worth getting aswell.

@TheAIRspace 3 жыл бұрын

The creos line is definitely a lot of quality for the cost. Well I shouldn't even say for the cost. Solid airbrushes all around. I think i've been running my 270 a year or so.. Id have to go back and look at the date I reviewed it.

@str8edgeify 2 жыл бұрын

In your opinion would you say it is on par with an eclipse?

@TheAIRspace 2 жыл бұрын

@@str8edgeify quality wise they are definitely there. the 270 hold an edge in detail over the eclipse, but its very minimal. The trigger is smoother on the creos. they are different however, the eclipse deals with thicker paints just a hair better, and you can use a .5 conversion on the eclipse. The size of the eclipse is a bit smaller, which I like. im a huge fan of eclipses. I like the size, the feel the weight. And the mac valve is not all that important to me on an airbrush. I like the drop in nozzles on the eclipse better. But make no mistake the creos airbrushes match anything in quality.

@rickmoreno6858 2 жыл бұрын

GSI makes a good ab!

@Ds-iv2tz 2 жыл бұрын

I just bought this airbrush and didn't realize that my air hose that I use on my badger will not work with the PS 289. So what size adapter do I need to connect my badger air line to the Creos???

@GMan269 3 жыл бұрын

How would you compare the770 with your iwata micron?

@simonlee8327 3 жыл бұрын

I want one. Nice add/ review.

@AirbrushAsylum 3 жыл бұрын

Thank you so much and glad you enjoyed it 👍🏻

@hoinguyenthi4 2 жыл бұрын

Mot cay ps 289 but ve my thuat ebrot mua o dau ha ban co gia bao nhieu cho toi biet so dien thoai cung nhu dia chi voi co duoc khong

@Carltheblackone 3 жыл бұрын

Any airbrush + compresor kit u recomend on Amazon to start in airbrushing? Cheers from Spain!

@hoinguyenthi4 2 жыл бұрын

Toi cung muon co mot cay ps 280 nhu the vay ban co the cho toi biet can mua o dau co duoc khong

@rolandzuber2856 3 жыл бұрын

Very nice, thank you! 🖖

@AirbrushAsylum 3 жыл бұрын

No probs glad you enjoyed it 👍🏻

@vladimirlopez7840 6 ай бұрын

It’s a great airbrush for beginner to pro.

@paulwhite6396 3 жыл бұрын

I have been airbrushing for few years now. I have tried a number of different brushes from the cheapest to intermediate brands. I bought an airbrush similar to this from china, but for more that half the price. I have found that the cheap brushes performs just as well a more expensive one. I've wanted to get an iwata micron, but I really can't justify the price. I'm sure this is a great airbrush for any artist, beginner or experienced.

@josecarlosxyz Жыл бұрын

yes they do, there's no reason to spend a lot of money on expensive airbrushes if what really maters are the experience and the skill of the painter

@PeteCourtier Жыл бұрын

Cheap ones will be fine for a while. They do wear out quickly though and performance drops off rapidly.

@paulwhite6396 Жыл бұрын

@@PeteCourtier I haven't noticed any loss of performance. Although I clean after every use and have replaced a seal or two.

@rumbaflamenca6939 2 жыл бұрын

...I would appreciate if you can, from time to time, to show us how to make some some easy brush drawings for kids (kittens, unicorns, etc.) Thanks again for all your videos. They are really helpful

@botoepfer8588 3 жыл бұрын

great video, I noticed the writing on the side of the Air B looks like the Iwata font,, I would buy this

@AirbrushAsylum 3 жыл бұрын

Yep it’s a great brush really smooth and able to achieve great detail with ease 👍🏻

@justinsane332 3 жыл бұрын

made in same factory if my memory serves correct. very good very affordable.

@simdoyle 2 жыл бұрын

Great video. Thanks

@AirbrushAsylum 2 жыл бұрын

Glad you liked it!

@simdoyle 2 жыл бұрын

@@AirbrushAsylum Cheers for the reply. The site is fab. Really good to keep coming back to these fundamentals as this is more art than science and all insight is helpful! Brilliant channel.

@RavenLunaticLeather 3 жыл бұрын

I have one of the battery powered airbrushes - not the no-name you demoed, but, it works pretty well, as long as I don't drop below 0.4mm nozzle. I recently got a side feed "Point Zero" with a 0.3 mm nozzle and a compressor that purports to put out 25PSI. Taking paint that works fine in the 0.4mm and putting it in the new brush, it only sprays in spurts if I keep pulling/releasing the trigger. If I hold it wide open, virtually nothing comes out. Same story if I just put water in there. I have cleaned/scrubbed the brush thoroughly, including a complete disassembly/clean/reassembly, and still get poor performance. Wondering if there is anything else I might consider before I give it up as a dud. Only thing I can think of left is to swap out the needle/nozzle and move it up to a 0.4mm setup and see if it starts spraying. Many thanks for all the help you give to those of us new to the hobby!

@RavenLunaticLeather 3 жыл бұрын

FWIW, if I stick my mouth on the cup and blow, everything sprays as it should. Soon as I stop, the spray goes back to being sporadic. Seems like, logically, while the cup does feed into the brush, it is just feeding too slowly. Am I totally off base here?

@RavenLunaticLeather 3 жыл бұрын

turned out to be the nozzle... swapped that out for another I had, and worked just fine.

@johnbasiglone1219 3 жыл бұрын

Why the fascination with skulls?

@sean3278 3 жыл бұрын

Can you do a review of the creos ps-290?

@AirbrushAsylum 3 жыл бұрын

Thanks for your comment I’ll see if SprayGunner can send me one to review 👍🏻

@blakegreene6641 2 жыл бұрын

I’m considering purchasing this as my first airbrush to paint duck decoys (fairly large birds), and small fishing baits as well. Do you recommend it? And how long can paint last such as 10ml gravity fed? Thanks Blake

@sirrathersplendid4825 2 жыл бұрын

I’ve got a big decoy duck in which the thick paint layer is a structural feature. How would that work with the micro-thin layers you get from airbrushing?

@willieyanez8139 3 жыл бұрын

Man that mini skull, holy smokes

@AirbrushAsylum 3 жыл бұрын

Thanks so much , quick little fun sketch to show the airbrushes potential 👍🏻

@AC-pu8tx 3 жыл бұрын

What paint line do you use and what reducers you use

@AirbrushAsylum 3 жыл бұрын

I use Trident Waterbased airbrush colours there are links in the description of this video, I also use their reducers, it’s great paint that flows like urethane 👍🏻

@beartracksful 3 жыл бұрын

To cool

@mlinden20905 3 жыл бұрын

I'm new to all of this. What I am planning on doing would need fine detail. Is the .2 a better version for such detail?00

@justinsane332 3 жыл бұрын

tbh, the .18 would be better for fine detail, but honestly all the procon brushes spray VERY fine. i just had to buy a .7 Grex because the smaller sizes really limited my ability to cover, so even if you think you wo t need a bigger needle, from experience I can tell you, most of the time, the .2 is limiting. its a super great brush though. id recommend a .3 and the .18, but if you can only get one brush, the .2 is great.

@GMan269 3 жыл бұрын

Justin Sane l

@MetaVita 2 жыл бұрын

So what was the verdict?

@bishalshair8676 2 жыл бұрын

I am a newbie to air brush and I will get this brush for me but I am screwed with the compressor, which compressor will fit best to this brush pleas recommend me. Also can I use this brush on auto body projects.

@AirbrushAsylum 2 жыл бұрын

Yes you can use this for auto projects , keep in mind that most Water based paints can be clearcoated and are made from automotive grade pigments, in regards to a compressor most will work it really depends on your budget and whether or not it needs to be silent etc check out this video where I speak a little about compressors and options ; kzfaq.info/get/bejne/eah2d7OYx9q8f40.html

@bishalshair8676 2 жыл бұрын

I have seen the video regarding compressor and brushes. Well I have decided to go with the iwata Eclipse hp cs 0.35 nozzle and sprint jet studio series Compressor for this brush. But befor finalizing any things I wanted to get your recommendation wether this compressor and brush are fit for my project or not? Also thank you for sending the supportive video and reply.

@putuplasts7940 2 жыл бұрын

So yeah, great spray properties, they really are! But what about the durability? I bought this airbrush a bit more than 3 months ago and I'm loving it so far! However there's already signs of paint cup's inner coating decay, after 3 months! It looks like dark cracks and blotches, like a corrosion, idk... So far I only sprayed trough it Gunze's own paints, the MrColor lacquers and AK Interactive Real Colors. For cleaning I also use Gunze's own cleaner - Mr Tool Cleaner R by pouring it into a cup, back-flushing and cleaning any remaining paint with a brush. Anyone else had similar problems, or is it just my "luck"? Did I do something wrong?

@AirbrushAsylum 2 жыл бұрын

thanks for your comment and sorry to hear you are having issues with the colour cup. Colour cups do wear and discolouration is common, that said I am more concerned when you say cracks ? I have had mine for about a year and it still looks and performs like new, my suggestion would be to reach out to SprayGunner, send them some pictures and see if they can help you with warranty. Hope that helps.

@putuplasts7940 2 жыл бұрын

@@AirbrushAsylum Yeah, I know they wear down with time. Before PS-289 I was using Eclipse as my workhorse, it's inner coating decayed over 4+ years. (the reason why I decided to replace it) However, before Eclipse, for roughly around 10 years I was using Sparmax DH-103. Now that stuff is SOLID! I put trough that sucker everything - acrylics, enamels, lacquers, you name it..., I cleaned it with all kinds of thinners, acetone even. It's inner coating is still largely intact, couple of scratches that was made by me, but in general it's paint cup looks way more better than Eclipse's. :D Anyway, thanks for the advice, I'll see what I can do with that warranty!

@AlienArteStoreMX Жыл бұрын

@@putuplasts7940 Hello friend, I also have a sparmax DH-103, 15 years and it works well, I want to buy a new one, I'm between GSI ps289 and iwata HP-C, or maybe Eclipse, on your experience, which one would you recommend to replace my old soldier sparmax?

@putuplasts7940 Жыл бұрын

@@AlienArteStoreMX Hello! I guess I would go for HP-C, just because I haven't used it before, but I have read some good reviews about it. If I'll have to choose from PS289 and Eclipse, I would choose the first one, just because i like it slightly better, but imho they both have very close, almost the same performance. So my top 3 would be: 1.HP-C 2.PS289 3.Eclipse I don't really have an in-depth explanation why I lined them up like this, just my personal preference. :D

@AlienArteStoreMX Жыл бұрын

@@putuplasts7940 Thank you. I will try ps289 since it is $70 usd plus shipping from japan and because I find the air control in front of it very useful and interesting

@henry-yu2ju 3 жыл бұрын

What would this have better than he iawata eclipse hp cs just the cheaper price and the cool manual air pressure thing ? Everyone is telling me to get the iwata

@AirbrushAsylum 3 жыл бұрын

Either will be a great choice as both brushes are fantastic, the only thing which may or may not suit you is the angled trigger, the iwata has straight up and down. I have used a eclipse for years and still love it but I have to say this brush is just as good and of the trigger feels comfy then this had the added Mac valve which is super handy 👍🏻

@henry-yu2ju 3 жыл бұрын

@@AirbrushAsylum do to pricing issues and random luck I was able to get the iwata for a lesser price than the ps 289. Thank you for the review and help ! I will be researching compressors and looking through your videos unless you have a good compressor update ?

@kevinorr328 3 жыл бұрын

@@henry-yu2ju I’m looking for a compressor also. Thanks for asking about an update.

@henry-yu2ju 3 жыл бұрын

@@kevinorr328 I went with one of the master airbrush compressor from Amazon a Tc326-t after reviews research etc.

@henry-yu2ju 3 жыл бұрын

It super quiet, no leaks, very light

@jamirmunoz1572 3 жыл бұрын

Nice

@AirbrushAsylum 3 жыл бұрын

Thank you

@str8edgeify 2 жыл бұрын

Would you say this is on par with a eclipse?

@BeeRumblin13 2 жыл бұрын

I have both. Eclipse Hpcs and the ps289. They are both built like tanks. And to me both spray pretty close to the same but hey both are different in their own ways though like cleaning and adjusting spray. I got my 289 as a second brush to my iwata hpcs. You can get pretty fine lines with both brushes. If you can get the 289 under $120 its a good deal to snag. BUT... parts for the creos are going to be harder to find than iwata parts.

@quilendar1604 3 жыл бұрын

👍

@AirbrushAsylum 3 жыл бұрын

Thank you

@suspensefulness 3 жыл бұрын

i love gsi ..i have 2 of there microns but i hated this airbrush..the angle really hurt my finger

@AirbrushAsylum 3 жыл бұрын

Interesting .. the angle didn’t bother me and yes the PS.770 and 771 are awesome, I suppose it all comes down to personal preference, whatever feels most comfortable for the user is the best option .

@suspensefulness 3 жыл бұрын

@@AirbrushAsylum yea i wanted to like it...but i couldnt

@TheAIRspace 3 жыл бұрын

@@suspensefulness since the trigger positioning is really no serious difference. Perhaps some grips would make a difference. Of course you may hold your airbrush in some different way I know a lot of people try and grab the post which is actually horrible form from the standpoint of carpal tunnel .

@suspensefulness 3 жыл бұрын

@@TheAIRspace its the angle..i didnt like it...but its ok...the gsi micron...is my best friend

@pedrojoselueirorey6121 3 жыл бұрын

Hello, is it possible that the subtitles are activated in Spanish? ¨It would be a great help for those of us who do not speak English. Thank you.

@jaypisme2343 Жыл бұрын

How much is this airbrush?

@AirbrushAsylum Жыл бұрын

I think its approx $120 USD, you can find the link in the videos description.

@lennonjames3871 3 жыл бұрын

Ya you make that look easy.but I bet it's not 🤔😂

@billbrowning3021 3 жыл бұрын

Aaaannnnnddd...it's all out of stock... :(

@AirbrushAsylum 3 жыл бұрын

😞 feel free to hit up SprayGunner to make sure you can get one once stock is replenished .

@SprayGunner 3 жыл бұрын

Hey Bill! Hold tight, more on the way already. By the end of next week we should restock

@mattellison6507 3 жыл бұрын

@@SprayGunner Hold 2! I'll be buying my 2nd gsi from ya. I love the 771 and I look forward to this one as well.

@SprayGunner 3 жыл бұрын

@@mattellison6507 thank you!

@josecarlosxyz Жыл бұрын

lol a lot of money on something you can buy a chinese that does the same wtf if you are starting you dont have experience on airbruses and probably will break them several times because they are non forgiving.l.. its better spend some money on cheap chinese airbrushes first and have plenty of needles and different nozzles. when buy nozzles see if they have the seal ring if not dont buy them

@rayfabris2512 9 ай бұрын

good morning I have a question" I have the same airbrush but I don't read Japanese so I've got a little problem lol but what size needle is in it? I just bought some paints that need reducer and I'm new to airbrushing btw I need to research what paints to get I got a set from Amazon I think that explains part of my problem but spraying metalic gold is a pain do you have any advice? thanks and have a good day from California